Question about PC Desktops

1 Answer

Make recovery discs for travelmate 5520 - PC Desktops

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

There are two (2) versions of the Acer TravelMate 5520; TM5520-5313 (LX.TKU0Z.001) & TM5520-5678 (LX.TKU0Z.003).

There are two (2) possible ways you can get Recovery CDs:
1. Purchase from Acer here. You would need your 22 character Serial Number or the SNID which is 11 chars.;
2. Borrow from a friend with identical model, copy and burn to CD(s).

Alternately, you can install Windows Vista using an OEM CD (which again can be borrowed). You need to use the Windows key normally found in a sticker underneath the laptop. Thereafter, you need to download from the Acer website the appropriate drivers and install. You would need to select your Product Line, the Product itself and eventually the driver(s) that you need.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Mar 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to restore to factory settings, hp desktop pavilion 1993


There are two ways to do this. 1st. Using the recovery partition already installed on your hard drive. 2nd. Creating recovery disc by launching the recovery disc creator. It is highly recommended that when purchasing a new computer a set of recovery discs be may as a factory back up in case your hard drive fails. You should make your recovery discs first. That will require at least 3 DVD blanks. Tell you what, you make the discs first and I'll explain how to use both methods. Click your start button and find a folder called maintenance. The location and name of the folder varies by each computer manufacture as to where they file the recovery disc creator program. I believe It's in the maintenance folder. Open it and there you should find the program. Simply run the program and follow instructions. computershack.leo@gmail.com Good Luck

Feb 09, 2014 | HP Pavilion A635W PC Desktop

Tip

How to use System Recovery console (steps)


Starting a Recovery

Turn on the computer and immediately begin pressing the F10 key repeatedly until a Recovery Screen appears.
You can also start a recovery from recovery discs, or from Windows. For more information refer to Performing a Full System Recovery in Windows XP .
Back to top

Recovery is taking too long
If your computer stops responding after using the recovery program, do the following:

NOTE:If the computer appears to have stopped responding after restarting from a recovery, please wait, it may take several hours or longer to complete the initial Windows XP setup process, especially if a recovery was run from a recovery disc set sent by HP. A Standard recovery may also take longer, depending on how many files are stored in user accounts (like in My Documents ).

1 Exit the stalled recovery process by pressing the POWER button on the PC until the power turns off, this takes approximately five seconds.
2 Before recovering, disconnect personal media drives, printers, scanners, cameras, camera-type memory cards, and other devices that did not originally come with the PC.
3 If you are using recovery discs, be aware of the following items:
4 If you created the recovery discs using Recovery CD Creator, be sure to run the recovery from the same drive that you used to create the discs.
5 Clean the discs with a soft, clean, lint-free cloth wetted with distilled water. Wipe from the center of the disc to the outside edge. You may also use disc cleaning kits or disc restoration kits from your local computer store. These kits produce better results than using cloth and water.
6 You may also use available CD/DVD Drive cleaning kits to clean the laser reading lens of the CD or DVD drive.
Try running a full system recovery again from the hard drive by turning the on the computer and pressing the F10 key until a Recovery Screen appears. This performs the recovery from the hard drive.
7 If the recovery stops when recovering from the hard drive, use the section Disc errors occur during the recovery process to eliminate errors on the drive. Try recovering again after the disk errors are removed.

___________________________________________________________________________________________________________________

If your computer stops responding after using the recovery program, do the following:

NOTE:If the computer appears to have stopped responding after restarting from a recovery, please wait, it may take several hours or longer to complete the initial Windows XP setup process, especially if a recovery was run from a recovery disc set sent by HP. A Standard recovery may also take longer, depending on how many files are stored in user accounts (like in My Documents ).

1 Exit the stalled recovery process by pressing the POWER button on the PC until the power turns off, this takes approximately five seconds.
Before recovering, disconnect personal media drives, printers, scanners, cameras, camera-type memory cards, and other devices that did not originally come with the PC.

2 If you are using recovery discs, be aware of the following items:
If you created the recovery discs using Recovery CD Creator, be sure to run the recovery from the same drive that you used to create the discs.

3 Clean the discs with a soft, clean, lint-free cloth wetted with distilled water. Wipe from the center of the disc to the outside edge. You may also use disc cleaning kits or disc restoration kits from your local computer store. These kits produce better results than using cloth and water.

4 You may also use available CD/DVD Drive cleaning kits to clean the laser reading lens of the CD or DVD drive.

5 Try running a full system recovery again from the hard drive by turning the on the computer and pressing the F10 key until a Recovery Screen appears. This performs the recovery from the hard drive.
If the recovery stops when recovering from the hard drive, use the section Disc errors occur during the recovery process to eliminate errors on the drive. Try recovering again after the disk errors are removed.

on Oct 13, 2011 | HP PC Desktops

1 Answer

I have an Acer Aspire 5520-5334 how do i reset to factory settings? It is running window vista.


Acer PC or laptop
Step 1:
Click "Start" menu.
Step 2:
Click "Programs."
Step 3:
Click "Acer Recovery Management."
Step 4:
Click the "Restore" button on the bottom of the dialog box that opens.
Step 5:
Click "Restore System to Factory Default."
Step 6:
Click "Yes" in the warning dialog box which asks if you wish to continue the recovery process.
Step 7:
Click "Start" to restore the computer to the default factory settings.
Tips & Warnings
If you are unable to access the Start menu, use the recovery CDs that came with the computer or visit Acer's website (see Resources below).
Always make a back-up CD before restoring a computer to factory defaults.
Resources

Feb 06, 2011 | PC Desktops

1 Answer

How to do system recovery on compaq presario 5000 windows me


Starting a Recovery Turn on the computer and immediately begin pressing the F10 key repeatedly until a Recovery Screen appears. You can also start a recovery from recovery discs, or from Windows. For more information refer to Performing a Full System Recovery in Windows XP . Back to topRecovery is taking too long If your computer stops responding after using the recovery program, do the following:
NOTE: If the computer appears to have stopped responding after restarting from a recovery, please wait, it may take several hours or longer to complete the initial Windows XP setup process, especially if a recovery was run from a recovery disc set sent by HP. A Standard recovery may also take longer, depending on how many files are stored in user accounts (like in My Documents ).
  1. Exit the stalled recovery process by pressing the POWER button on the PC until the power turns off, this takes approximately five seconds.
  2. Before recovering, disconnect personal media drives, printers, scanners, cameras, camera-type memory cards, and other devices that did not originally come with the PC.
  3. If you are using recovery discs, be aware of the following items:
    • If you created the recovery discs using Recovery CD Creator, be sure to run the recovery from the same drive that you used to create the discs.
    • Clean the discs with a soft, clean, lint-free cloth wetted with distilled water. Wipe from the center of the disc to the outside edge. You may also use disc cleaning kits or disc restoration kits from your local computer store. These kits produce better results than using cloth and water.
    • You may also use available CD/DVD Drive cleaning kits to clean the laser reading lens of the CD or DVD drive.
  4. Try running a full system recovery again from the hard drive by turning the on the computer and pressing the F10 key until a Recovery Screen appears. This performs the recovery from the hard drive.
  5. If the recovery stops when recovering from the hard drive, use the section Disc errors occur during the recovery process to eliminate errors on the drive. Try recovering again after the disk errors are removed.

Jan 13, 2011 | Compaq Presario 5000 PC Desktop

2 Answers

Hi there, can any one please help me to get original restore disk


If you already have windows operating system CDs then you simply need to download the recovery software for your laptop from

http://www.user-guides.co.uk/cddownload/Acer/AcerTravelmate/Acer-Travelmate-2420-XP-Driver-Recovery-CD-Restore-Disk-1086.html

Hope this helps.

Jan 31, 2010 | Acer PC Desktops

1 Answer

I HAVE AN ACER TRAVELMATE 5520 WITH THE BLUETOOTH SWITCH ON THE FRONT PANEL OF IT BUT WHEN I TRY TO SWITCH IT ON NO LIGHT COMES ON AND NOTHING HAPPENS WHY IS THIS HAPPENING I WOULD BE VERY GRATEFUL IF YOU...


Hi lanny,

This is caused by one of two problems either the button/light doesn't work or bluetooth settings are not configured correctly to allow it to work.

To configure it correctly go to start menu>control panel>Bluetooth and make sure that it is enabled and set to work with that little button. I would concentrate on these settings until i got it to work.

Nov 13, 2008 | Acer PC Desktops

1 Answer

Why can't I hear audio when I play my cassette player plugged in to the line-in jack of my Acer Travelmate 5520


You need some form of software to port it out. Basically, you can use windows sound recorder and hear it for the duration of the recording and play it back that way but it's only 30 seconds at a time. You need software to feedback the audio all the time. Maybe DJ software or something like that would do the trick.

Nov 12, 2008 | Acer PC Desktops

1 Answer

How do I disable the touchpad on an acer travelmate 5520


fn (funtion key) F7
control panel - mouse settings - there's a check box Disable internal pointing device when external USB pointing device is connected

Jul 23, 2008 | Acer PC Desktops

1 Answer

HP MEDIA CENTER 864N Desktop PC&p RECOVERY CD


NOTE: Most HP and Compaq desktop PCs that ship with Windows Vista and XP do not come with recovery discs. Instead, they use a hidden space (partition) on the hard drive to store the recovery information. Using a hidden partition provides a convenient, more stable recovery solution.
Step 1: Create a set of recovery discs or a recovery DVD
To create the recovery disc set, Click Start , All Programs , PC Help & Tools (or similar), open the HP or Compaq Recovery CD-DVD Creation software, and follow the on-screen directions.
If you cannot create recovery discs or your discs have become damaged, continue to the next step.
Step 2: Order recovery CDs on the Web
If you are not able to create a set of recovery discs, you may be able to order a set of replacement discs from HP. HP maintains a stock of replacement recovery discs for several years after the product has been released. However, because of licensing restrictions, HP is only able to provide these recovery discs for a limited time. If your computer is several years past its warranty period, HP may not be able to supply replacement discs for your computer. If this is the case, you can install a new operating system that meets the minimum system requirements of your computer, or, alternatively, upgrade your computer hardware.
To find out if HP has recovery discs that you can order and to order them from HP, use the following steps:
NOTE: The steps in this section apply to United States and Canada. For Europe, Middle East, and Africa please refer to the HP support document Europe, Middle East, and Africa - Statement on the Availability of the Recovery Software on CD . For other countries/regions, contact your local HP support center for information about obtaining recovery CDs.
Go to the Software & Driver Downloads page .
Enter the product number or model name for your computer into the field provided.
Figure 1: Product name/number field
7195023.gif
Click the operating system link (the version of Windows that came with your computer).
Figure 2: Example of operating system link
f96d267.gif
Find the Recovery Disc ordering section and click the link to start the ordering process.
NOTE: Before trying to order, make sure that you have read the important "Read this..." information listed in this Recover Disc ordering section.
Note: - If the link to order a recovery disc set is not available, there may not be any more sets available for purchase. HP cannot create recovery discs that contain a version of Windows that has been obsoleted by Microsoft, such as Windows 95, 98, and Me. Some recovery disc sets may have run out of stock and may not be available to order.
Figure 3: Recovery disc ordering links
7640107.gif
Follow the directions from the "Read this...” article and from the ordering pages to complete the ordering process.
NOTE: The ordering pages use a secure connection to protect your privacy.
If you cannot create a recovery disc set and you cannot order a recovery disc set from HP, go to the next step.
Step 3: Contact Support
If you have tried the steps 1 and 2 and could not create or obtain a recovery disc set, contact HP Customer Care . HP Customer Care may be able to send out new discs or replace defective versions depending on your situation and availability.

Jul 21, 2008 | HP PC Desktops

1 Answer

Hi i have an acer aspire 5520 and was looking to clean my c drive. but i didnt get a cd with the the laptop package when it arrived. help me please


when you first received the laptop and turned it on ,it would have asked you to make a recovery disc,
if you did ,(and if i understand you correctly ,you want to format the hard drive),

put it in the cd drive and boot up to recover your hard drive,

or when you boot the laptop up, it will tell you what button to push (sometimes F11) to go to the recovery partition, and restore it back to the factory settings,read the manual.

you may need to reboot a number of times to catch what it says if you don't have the manual,

then you will be asked if you want a destructive recovery (lose all date) or not ,this depends why you want to clean the hard drive.

a none destructive will leave your programs on the hard drive and restore only the operating system & drivers.

good luck
Terry

Mar 28, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...