At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I need a manual for Kenmore Elite HE4t front load washer. Most of the programs written at the front were erased already I want to put back all the programs. Sometimes I select the wrong program.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like the rear bearing. If you hear the noise when you manually spin the drum or if the drum has any movement when you lift up on it then you need major repairs
Hi! ricksmith What is the first three digits of the model number. The he4t I have reference to does not have a "F" code error. Most of the codes are two digit, PF, F1 to F9 etc. You could try: Pressing Pause/Cancel two times to clear code. As well as unplug for 20 seconds. Do you have power fluctuations in your area. InMrFixIt
Check for advice and solutions under "Kenmore Elite HE4t Washer" problems on this site. We have a Elite HE, but they are set up the same and the solutions should help you out. I've been dealing with the same issue.
Good luck!
open lower front with a starshaped bit(screwdriver) three small screws, to get to white plastic cleanout (easy to turn by hand)may have someting stuck in it. about a gallon of water is there so have two big towels ready to soak it up.
×