At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The system is overheating. Try to place it on a elevated location on something hard and flat to let air flow through it. Try to clean the fans and vents around the back,bottom and sides.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The red light flashing on your handset could indicate that the phone is in an alert state, or that there is an incoming call or message. To turn off the red light flashing on the handset, you can try the following steps:
Check the display: Make sure that the phone is not in silent or vibrate mode, and that the ringer volume is turned up.
Check for missed calls or messages: See if you have any missed calls or messages that could be causing the red light to flash.
Check for other alerts: See if there are any other alerts, such as low battery or signal strength, that could be causing the red light to flash.
Check for software updates: Make sure that your phone is running the latest software update. Sometimes, software updates can fix bugs that cause issues like this.
Check the settings: Go to the settings of your phone and check the display settings, make sure the red light is turned off.
Check with the phone's manufacturer: If the problem persists, you may want to contact the phone's manufacturer for further assistance or check if the device is still under warranty.
Check your user guide if available. It sounds like you haven't set the door open limit, so press the up arrow & fully open to the door & push set, do the same for the down arrow until door is completely closed. Push the set button again & the door should be right..
The flashing "boat" in the middle of the viewfinder just means the button battery is dead. Camera will still work. It's the little pull-out light grey plastic thing that's next to the heel of your right hand when you're using the camera normally. You need a CR2025 cell.
The flash has been working fine until last night when I tried to take a picture and the flash was set to auto. When I press the button the little red light beside the flash sign lights up, but the camera does not take the photo. When I set it to flash mode, it still won't take a photo. When I turn off the flash, then it does. What could be the problem? Is it in the settings?
Then I'd say it's a reasonably sure thing that the green light is just burned out, The lights are supposed to be off at first, then red when there's a partial charge, then green when there's a full charge, then flashing between red and green when the "battery saver" kicks in. If you're seeing off, then red, then off, then flashing red, then that means everything in the charging circuit is working perfectly, there's just no green light.
Yes it is. I believe Panasonic knows that the built in flash casts a very blue tint so they set the flash WB to very red to compensate. Therefore before the flash is triggered as when you watch the LCD. Some threads here even suggested adjust the WB further 2 knots to the red manually (press " up" a few times on the 4-way button to have better skin tone. Try it. The setting stays even when you turn off the camera.
×