Question about HTC PPC-6800 Smartphone

1 Answer

Comm manager When I am home I want to use my wi-fi network a the primary means of accessing the internet and my hotmail. How can I configure the phone to use the wi-fi instead of the alltel wireless number? Right now I have to turn off the phone function but I want to be able to get phone calls while I read hotmail and surf.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

You should be able to leave all the settings on in the comm manager. Try just turning the wi-fi switch on when home, and off again when you leave.

Posted on Apr 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it possible to connect a standard DSL modem - without Wi-Fi (with 1 Ethernet port) and a DSL modem - Wi-Fi (with 4 Ethernet port) to broadcast Wi-Fi singles


Does the non wifi modem give out DHCP addresses?
Can the wifi modem be set up to receive it's IP address from DHCP?
If the answer to both these questions is Yes then that's what to do as a first step. Make sure the wifi modem DHCP service is disabled as it must NOT give out DHCP addresses.
Connect the ethernet port of the non wifi modem to one of the LAN ports of the wifi modem and NOT the DSL/WAN port. The wifi modem is not participating in any DSL connectivity at all so it's DSL light will remain off. The non wifi modem is doing the DSL duty so it's DSL light should be correctly illuminated.

May 01, 2015 | Computers & Internet

Tip

How do I Get Wi-Fi on my iPod Touch if it Says No Wi-Fi


<p>One of the most useful features of the iPod Touch is the ability to use the Internet through a WiFi connection if you have a wireless home network and within range of your router, you can access the Internet via your iPod with ease. If you're in public, you can use the free wireless internet businesses such as hotels, cafes and airports. If you are not in a Wi-Fi zone, will warn you that your iPod will not be able to get online. When this happens, then you need to move to an area that has Wi-Fi <br /> <p><br /> <p>1. Confirm your wireless connection is configured correctly by checking if you can get online on your home computer. If your router is not configured correctly, you will not be able to use their access to Wi-Fi with your iPod. <br /> <p>2. Go to a place where you know Wi-Fi is available. In urban areas, Wi-Fi is available in many businesses and families. Press the "Settings" icon on your iPod, click on "Wi-Fi" to search for available networks in the area. If there are none that appear, confirming the Wi-Fi icon at the top of the page is set to "On" instead of "Off". If no network can see, you're in an area where there is Wi-Fi available. <br /> <p><br /> <p>3. Click the name of an available Wi-Fi network and enter the correct password. Sometimes you may not be able to access the network, because you do not have the password. While companies such as pubs and hotels to their networks without protection for the enjoyment of their patrons are usually password protected networks. <br />

on Aug 05, 2011 | Computers & Internet

1 Answer

HOW TO CHANGE THE INTERNET SETTINGS IN THE HTC WILDFIRE A3333


Wi-Fi provides wireless Internet access over distances of up to 100 meters (00 feet).

To use Wi-Fi on your phone, you need access to a wireless access point or "hotspot". The availability
and range of the Wi-Fi signal depends on the number, infrastructure, and other objects
through which the signal passes.

Turning Wi-Fi on and connecting to a wireless network
From the Home screen, press MENU, and then tap Settings > Wireless & networks.
Select the Wi-Fi check box to turn Wi-Fi on. The phone then scans for available wireless
networks.

Tap Wi-Fi settings. The network names and security settings of detected Wi-Fi networks
are displayed in the Wi-Fi networks section.
If the wireless network you want to connect to is not in the list of detected networks,
scroll down the screen, and then tap Add Wi-Fi network. Enter the wireless network
settings, and then tap Save.

Tap the Wi-Fi network you want to connect to.
If you selected an open network, you will be automatically connected to the network.
If you selected a network that is secured with WEP, enter the key and then tap
Connect.

Depending on the network type and its security settings, you may also need to enter more information
or choose a security certificate.
When your phone is connected to a wireless network, the Wi-Fi icon appears in the
status bar and tells you the approximate signal strength (number of bands that light up).
The next time your phone connects to a previously accessed secured wireless network, you
will not be prompted to enter the key or other security information again, unless you reset
your phone to its factory default settings.

Jan 28, 2015 | HTC Wildfire A3333 Cell Phone

1 Answer

My ZTE v9 tablet phone will not connect to the Internet


you can access the Internet through the mobile network or via Wi-Fi.Your mobile network settings are pre-configured by your serviceprovider and there is no need to change any settings. Wi-Fi Wi-Fi provides wireless Internet access over distances of up to 100meters.1. Tap Home > Settings > Wireless & networks .2. Select the Wi-Fi check box to turn Wi-Fi on

Dec 02, 2012 | Cell Phones

1 Answer

My new zte v9 wont connect to the Internet


you can access the Internet through the mobile network or via Wi-Fi.Your mobile network settings are pre-configured by your serviceprovider and there is no need to change any settings. Wi-Fi Wi-Fi provides wireless Internet access over distances of up to 100meters.1. Tap Home > Settings > Wireless & networks .2. Select the Wi-Fi check box to turn Wi-Fi on

Dec 02, 2012 | ZTE V9 Smartpad Android Internet Tablet

1 Answer

Blackberry Bold use Wi-Fi network or mobile first


Yes, the Bold 9700 will use wi-fi in preference to the mobile network whenever both are available. I had one for a month, it was my primary means of internet access and I didn't get charged a penny for any data usage. I used it on both my home wireless network and in many public hotspots.

In any case, it's easy to check: the top of the screen will show the wi-fi logo in white when connected and greyed out when wi-fi is switched on but not connected.

I hope that this answers your question, if so then please take a moment to rate my reply. If not, then please add a comment and I shall expand upon my answer to suit your needs.

Mar 31, 2010 | RIM BlackBerry Bold 9700 Smartphone

1 Answer

I purchased a new IPOD and I can not access the wifi from my Linksys wireless router.. I reset my Linksys router to try to solve this problem. And at first when the light was amber I was able to have...


Resolution If you know there is a nearby Wi-Fi network, but you are unable to locate it on the Settings > Wi-Fi screen:
  • Move closer to the Wi-Fi router or hotspot.
  • If you are using a personal Wi-Fi network, verify the Wi-Fi router is connected to power and turned on.
  • Wi-Fi networks configured as "closed" or "private" do not broadcast the network name to Wi-Fi devices.
    • Join a "closed" or "private" network by tapping Settings > Wi-Fi > Other and entering the Wi-Fi network name, security, and password.
After joining a Wi-Fi network, if you notice the signal strength is low or intermittent
  • Move closer to the Wi-Fi router or hotspot.
  • Check for any sources of potential interference.
  • Remove any cases or attachments on your device that could interfere with a Wi-Fi signal.
If you are unable to access the Internet while connected
  • If you are using a commercial Wi-Fi network that requires a special login or subscription, see this article for more information.
  • If you are in a location with multiple Wi-Fi networks, verify that you are selecting the correct network.
  • Verify that the Wi-Fi network settings are correct:
    • Tap Settings > Wi-Fi.
    • Locate the Wi-Fi network you are currently using and tap ts1398_2.jpg
      blank.gif
  • You can configure network-specific settings, including IP address, DNS, and Search Domain settings.
  • Use "Forget this Network" to reset settings for this particular Wi-Fi network, including the password. This is also useful if you identify a network issue and want to prevent the device from automatically using this network in the future.
  • Use "Renew Lease" to acquire new IP address, DNS, and Search Domain information from the Wi-Fi network.
  • Note: If the Wi-Fi network uses MAC address filtering, you will need to add the MAC address to the access list for the Wi-Fi router. The MAC address for your device is listed as the Wi-Fi Address in Settings > General > About.
If you are still unable to join a Wi-Fi network, or are unable to access the Internet while connected, try the following
  • Restart the device
    • Hold the power button until "slide to power off" appears. Slide to power off your device. When it is off, press the power button to turn it back on.
  • Reset network settings by selecting Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings, including passwords, VPN, and APN settings.
  • iPhone only: If you continue to experience issues, consider turning off Wi-Fi and using the cellular data connection instead of Wi-Fi.
Additional Information If using a Wi-Fi router at home, refer to your user manual/documentation to assist you with some of these suggestions.
  • Check the manufacturer's website for your Wi-Fi router for firmware or software updates.
  • Verify the Wi-Fi router can broadcast an 802.11b/g signal. If using a 802.11n Wi-Fi router, consult the manual/documentation for how to configure the Wi-Fi router for 802.11b/g compatibility.
  • If you are using multiple WEP keys on your Wi-Fi router, try configuring your Wi-Fi router to use only a single WEP key.
  • Try or resetting (or turning off and then on again) your Wi-Fi router. Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
  • Disable wireless encryption or security on the Wi-Fi router to rule out encryption issues. If this resolves the issue, try using a different encryption or security protocol.

Mar 22, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

How to connect htc p3450 to wifi..


Start out by bringing up the cube, but this time press the Comm Manager button and then press the WLAN button. This will turn on the Wi-Fi “radio” inside your phone. If you are within range of a Wi-Fi signal (your home network perhaps) a wizard will pop up on the bottom of the screen indicating wireless networks that are within range and it asks you to “Select a network to connect to:”. These are “access points”, or commonly referred to as “hotspots”. Chances are there will be more than one so simply tap on the name of the one that is available to you and that you know the password for if necessary.
The next window will ask you to select if the access point/hotspot you selected connects to the internet or to “Work”. “Work” indicates a private network, so chances are you will want to tap on “the internet” as your choice. If the network you chose is “security enabled” you will be asked to enter the “key” (password), then press “connect”. If it is not a secure network, do not enter anything and just press “connect”. Look at the top of your screen and notice the Wi-Fi status indicator. When the arrows stop being animated and the little tower icon has a solid circle around the top part you are connected to the network and ready to surf. The next time you are within range of this network you will be able to connect automatically within seconds of turning on Wi-Fi in the Comm Manager. You only have to go through this setup procedure each time you connect to a new network for the first time.
Once you have connected to a Wi-Fi network, the settings will be saved and you can see/edit/delete these settings by tapping on the soft menu labeled “Settings” from the Comm Manager page. Choose “Wireless LAN” then press the left soft button labeled “Menu” and choose “Wi-Fi”. There you will see the network names that are available to you now, or that you connected to in the past. If you will not be using a particular network again you can delete it by either pressing directly on the name of it long enough to bring up a menu that has “remove settings” as a choice or by highlighting the one you want to delete and then pressing the right soft button labeled “Menu” and choosing “Remove Settings”.

Once you are connected, press Comm Manager’s left soft button labeled “Exit” or tap the “X” in the upper right-hand corner then bring up the cube and press the “Internet Explorer” button. Then you can go to whatever web page you want.

Mar 02, 2010 | HTC Touch P3450 Smartphone

1 Answer

LG Incite: Connect to a multiple-user WiFi network


To enable or disable Wi-Fi
  1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager.
  2. Choose the Wi-Fi button. If it is turned off, the button will appear as a lighter color and display an icon marked with an "X".
  3. Choose Done.
clear.gif To set up a Wi-Fi connection
  1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager.
  2. Scroll to Wi-Fi and press ENTER. The device will detect available Wi-Fi networks.
  3. Select the network you want to connect to, and then choose OK.
  4. Select Internet or Work, and then choose Connect.
    If you select a secure network, you may have to enter a network key that is provided by the network administrator.
clear.gif To edit a Wi-Fi connection
  1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager.
  2. Choose Menu, and then choose Wi-Fi Settings.
  3. Scroll to the connection that you want to edit, choose Menu, and then choose Edit.
  4. Make changes as needed, and then choose Finish.
clear.gif To delete a Wi-Fi connection
  1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager.
  2. Choose Menu, and then choose Wi-Fi Settings.
  3. Scroll to the connection that you want to delete, choose Menu, and then choose Remove Settings.
clear.gif To change Wi-Fi settings
  1. Choose Start, choose Settings, choose the Connections tab, and then choose Wireless Manager.
  2. Choose Menu, choose Wi-Fi Settings, and then choose the Wireless tab.
  3. Scroll to the connection that has the settings that you want to change, choose Menu, and then choose Edit.
  4. Change any of the following information:
    • In Network name, enter a name for the connection.
    • In Connects to, select The Internet or Work.
    • If the network is a hidden network, which means that it does not broadcast its Service Set Identifier (SSID), select This is a hidden network.
    • If you want to connect directly to another device or computer, and not to a network through an access point, select This is a device to device (ad-hoc) connection.
  5. Choose Next.
  6. On the Configure Network Authentication screen, do the following:
    • Select the authentication and data encryption methods.
    • Enter the network key information or select the The key is automatically provided check box.
      If it is necessary, ask the network administrator for authentication, encryption, and network key information.
  7. Choose Next.
  8. Select or clear the Use IEEE 802.1X network access control check box.
  9. To use Extensible Authentication Protocol (EAP) or smart card authentication, make the selections appropriate to your choice of authentication.
  10. Choose Finish.

Aug 05, 2009 | LG Incite Cell Phone

6 Answers

Wifi issues


i think there is some kind of block from the network administrator

usually you can access wifi easily with out any problems.

di u install any third party application in your phone recently??

Sep 17, 2008 | HTC Touch P3450 Smartphone

Not finding what you are looking for?
HTC PPC-6800 Smartphone Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top HTC Computers & Internet Experts

SANJEEV KUMAR SURI
SANJEEV KUMAR SURI

Level 2 Expert

170 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18408 Answers

Tom Chichester

Level 3 Expert

36394 Answers

Are you a HTC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...