Question about Logitech QuickCam Communicate STX Personal Web Camera

1 Answer

Quickcam output signal

Im interested in using a quickcam in a ham radio project.First i need to know whether the quickcam can operate in a one way send only mode to the computer. If so,i need some data on the nature( serial bits/packets?) and frequencies of quickcam output at say,5,10, 20, 30fps vga resolution or better. I intend to modulate a radio signal with its data if possible.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Hello trescojones,

You're better off writing directly to Logitech regarding this. Their engineers should be able to sort it out for you. Their address is:

Logitech Americas Headquarters
6505 Kaiser Dr.
Fremont, CA 94555 USA
+1 510-795-8500
Monday - Friday, 8:00am - 5:00pm PST

Or you can send them an E-Mail
or talk on the phone:
General Product Phone Support (United States) +1 646-454-3200
Monday - Friday: 6am - 6pm PST
Saturday - Sunday: 7am - 5pm PST
General Product Phone Support (Canada) +1 416-207-2782 Monday - Friday: 6am - 6pm PST If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.

Thank you for using FIXYA!

Cheers!
IrishDruid


Posted on Apr 26, 2008

  • Swilin Sampson
    Swilin Sampson May 03, 2008

    Hi,




    Just wanted to inquire if your issue is resolved, or if there is anything
    further I can do to assist you…





    If you find that the solution/answer I provided led you
    to, or resulted in a fix, please take a moment to close the ticket with a FixYa!
    rating under my solution.
    I would be very grateful for your show of appreciation.





    Should you have any further questions, please feel free to
    post them here.





    Thank you for using FIXYA!





    Cheers!


    IrishDruid

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I send video over ham radio?


There are many ways to send video using ham radio frequencies. There are numerous books on the subject available form the ARRL on slow scan and fast scan TV. I suggest you start there and read up so you can decide what you want to use, possibly based on what other users in your area are using.
You will need additional hardware and software. There are numerous places to get information, this is one

SSTV

Oct 28, 2016 | Radio Communications

1 Answer

Motorola gp 2000 how erase old frq how to set ham radio frq pls kindly send video message thank you


I do not know how to make a video. You need the software and proper cable to program a Motorola GP2000. Of course, a computer capable of running the software, which means Windows. Probably not windows 10 yet. I use Windows XP still. Then you need your Ham frequencies, which are easily obtained.

Jul 23, 2016 | Motorola Radio Communications

1 Answer

Just got a ranger rci69ffb4 CB radio. I do not know how to operate it. What band number to put it on to talk. There is 1-7 on it. And do I put it on an or ssb mode. Thanks


If you want to talk on AM put it on AM if you want to talk on SSB then put it on SSB. Did you recently purchase this radio? You do realize you need a ham radio license to use this ?If you are on the upper ham bands you better have a license or they will come and get you .Look at the the dial that has 1 - 7 on it. Now take the owners manual and look at the diagram of the knob . It should say something about frequencies and the frequency you need to operate on is from 26.965 to 27.405 MHZ .

Apr 25, 2016 | Ranger Radio Communications

1 Answer

Found this in a box of stuff after my friend passed away.


You need to be a licensed Ham Radio Operator. The license is issued by the FCC. You can google Ham radio license prep to get all the information you need to get licensed. Once you have the license you will also get your station call letters. Without them you cannot even try to operate the radio.

Nov 20, 2015 | Kenwood Tk-840 Frs Gmrs & Ham 70cm Uhf...

1 Answer

I have a Teaberry stalker one 40 channel. Is it rare because most of the stalker one's I've seen are 23 channels.


if you are looking for 40 channel CB than i would look under ham radio operators, CB repair shops, if you are looking for another one, you may even look up on www.ebay.com
the ham radio operators would be where i would look and talk to.
i would look for ham radio clubs, they have swap meets all the time, old tv and radio repair shop. i have been in ham radio operations in 20 yrs and i do not know anyone. you may check out the local library., the FCC may be help you find local ham radio operator in your location. they will help you find that old equipment, than on the other side of the coin what are you willing to pay to locate an operate one is and are they willing to part with it.

good luck rod

Mar 25, 2015 | Radio Communications

3 Answers

Need free chirp computer program for a bao-fang uv5ra ht to make it work


if you want it ill send it email me at kekorepeleco@icloud.com then ill send it

Feb 16, 2013 | Baofeng UV-5RA Dual Band Transceiver

1 Answer

Ft270r handheld radio mod. issue


Hi Adrian,

Firstly, I take it that you are a licensed Amateur operator, if not, you're breaking the law.

If, on the other hand you are licensed, then I would contact a friendly Ham operator, who would be only to pleased to assist, after all, Amateur radio operators spend most of their time doing just this kind of thing, as you well know, if you are indeed a licensed Ham operator.

Cheers,
Peter

Jul 19, 2012 | Yaesu Ft-270r 5 Watt Waterproof Vhf Two...

5 Answers

I jus was wondering, can the cb radio and the handheld radio transmit on the same channel? Im a security officer and im interested in purchase a cb radio so we can use it at work but i dont know if its...


CB radios and hand-held CB radios can operate on the same channel and be in contact with each other. Other hand-held radios do not operate on the same frequencies and even though they may have channel numbers the channels have different frequencies and will not operate to CB radios.

Oct 29, 2010 | Cobra 150 GTL DX Base CB Radio

1 Answer

Bands covered by Furuno FS-1502


It doesn't appear to cover the ham bands, only maritime. This radio is also not type approved for operation on ham bands either.

You can find the freq. range in the manual at the link below:

http://www.furunousa.com/Furuno/Doc/0/AHHEA1GA2ITKN04R23GBMOTKF1/FS1502%20Operator%5C%27s%20Manual%20Vu.pdf

Nice Radio though.

Sep 12, 2009 | Furuno FS1503 (199 Channels) 2-Way Radio

Not finding what you are looking for?
Logitech QuickCam Communicate STX Personal Web Camera Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

2992 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...