Question about HP TouchSmart IQ770 PC Desktop

1 Answer

HI I have a h/p touchscreen pc it froze today and it was un plugged now we try to start it up and it is trying but there is nothing on the monitor and the computer is just racing and nothing at all happening what can i do as it was working perfect before it froze thanks

Posted by on

  • nobjob Apr 27, 2010

    thanks for your help i have it up and running again it was a static problem so had to unplug the computer and then push the on button and hold it for 25 seconds this gets rid of the static and then the computer started up again,

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

Start the computer and then immediately start tapping F10, if getting a display, the issue is related to software in the touchscreen. press F5 > enter, F10 > enter and check for functionality. If not getting any display the graphics card may require replacement else the motherboard.

Posted on Apr 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Non-Stop Auto Configure


1. Verify the monitor's power cord is plugged firmly into the wall outlet and the back of the monitor.
2. Verify the monitor cable is firmly connected to the computer and the monitor.
3. Verify that you have turned the monitor power switch on.
4. If the power light on the monitor is not on, test the wall outlet (plug in a light or something you know works).
5. If the power light on the monitor is not on, try a different power cord.
6. If the power light is on and yellow or flashing, but nothing displays, borrow a monitor from a friend. If that works, your monitor probably needs replaced.

Apr 09, 2014 | Acer X203H bd Monitor

1 Answer

I purchased a 3M 15"


This display uses a capacitive touchscreen. It relies on the conductivity of your finder work. It may be that it has lost sensitivity and only works when there is a path to ground through your body. If this is the case then the touchscreen will need replacing.

Feb 18, 2011 | 3M 11-4922-129-00 (Black) 15 in. Flat...

1 Answer

Acer T230 H monitor Hdmi ConnectionProblem


I don't think your doing nothing wrong, but I may be wrong. I would just stick with the other connections. HOpe this helps!?


Please rate solution - Thanks.

May 14, 2010 | Acer T230H 23 inch LCD Monitor

1 Answer

Was trying to hook up hp printer. when i plugged


HP Printer driver problem. Disconnect Printer and see if the computer boots up properly now.

Mar 09, 2010 | HP Compaq Presario 6320US (DA202A#ABA) PC...

1 Answer

Monitor flashes on wont stay on. not original


Try un-plugging all cables from monitor then re-connecting. If this doesn't work then it must be to do with the charger issue.

Feb 06, 2010 | Compaq Presario Desktop PC

1 Answer

Samsung monitor


Try to plug the monitor into another computer and see if the problem reappears.

If the problem reappears - you have a monitor failure...if not, try checking the monitor connection at the computer side for bent pins or loose video card in your computer and test again.

Lastly, make sure your computer is not coming out of hibernation power mode (control panel, power settings etc).

Hope this helps!

Mar 14, 2008 | Computers & Internet

3 Answers

Monitor not getting info from computer


Does the computer beep when it starts? Does the monitor work on another pc? Possible culprits with these symptoms are the power supply and video card.

Feb 16, 2008 | HP Pavilion 533w (P9859AR#ABA) PC Desktop

2 Answers

Mx-3000 just froze up


This happened to me today. I plugged the programming cable into the MX 3000 and the screen became "un-froze."

Jan 08, 2008 | Universal Remote Control MX-3000 LCD...

Not finding what you are looking for?
HP TouchSmart IQ770 PC Desktop Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...