Question about Computers & Internet

5 Answers

I have a denon 3808 and have it wirelessly connected to the internet via an ethernet converter that detects my wireless router signal.  I can download firmware updates and play internet radio.  However, I cannot figure out how to play music from my computer through the denon.  I do not have a shared network or anything and am definitely not an expert on networking so it may be something simple.  I'd like to be able to wirelessly access my computer music files on the denon and pick what I want to play.  Thanks.

Posted by on

5 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

There is a way to do what you are asking for using the AVR-3808 internet radio facility.
Lets say you have your slimserver on a pc with ip 192.168.o.5
Then you need to go to this site: www.radiodenon.com and add this as a station like this; http://192.168.0.5:9000/stream.mp3
after that you can select that in your denon under internet radio and added stations.
Slimserver thinks that it is streaming to a winamp software player and Denon think it listens to a internet radiostation.
The down side is that it only works with mp3.
Maybe someone else has done this in a better way, then please let us know. hope this helps, good luck, feel free to post further questions

Posted on Mar 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Initially, pls try sharing the folder where your music files are in your PC. This is done by right clicking on the folder, click on "Sharing and Security...", on the next window, check "Share this folder on the network, Apply and OK.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Mar 23, 2008

  • Louie  Role
    Louie Role Mar 23, 2008

    Hi again,

    Going back to your post:
    1. "can download firmware updates and play internet radio" - confirms that indeed you are already connected to your wireless network;
    2. "how to play music from my computer" - the Denon must access your PC, for the PC to be accesses, it must be on the same network and the files/folders (music) must be shared;
    3. "do not have a shared network" - following my initial post would give you a shared resource in your network.

    This is better explained in page 55 of the Denon's manual.

    Cheers.


  • Louie  Role
    Louie Role Mar 25, 2008

    Hi again,

    Any development(s) so far with your wireless project?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,889 Answers

You will need to create a wireless Local Area Network. The detailed procedure can be found here

Posted on Mar 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 796 Answers

I don't think Denon has released its full lineup of 2008 receivers yet. (Note that for Denon the last digit denotes the model year and for Yamaha, it's the second digit.)

Posted on Mar 23, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Then make a wireless lan in your house.

Posted on Mar 23, 2008

  • dewan nafees ahmed Mar 23, 2008

    create a wireless lan inside your house

    and then from your computer synchronize the hardwares of the denon.


    there you will need to add for hardware and give necessary permissions for the denon hardware to connect to your PC.

    also configure your firewall and AV programs so that they dont block the acess of that hardware of your denon to your PC.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No enternet access


Check the wireless router and high-speed modem.

If the two are not powered on, or if the Ethernet cable connected the two is not completely inserted into both connection ports, you are unable to access the Internet on the Acer Aspire One laptop computer.


Activate the wireless Internet connection on the laptop computer.

Right-click the wireless icon on the desktop, then choose "Enable" from the pop-up menu.


Without activating the wireless receiver on the Acer Aspire One, the laptop is unable to detect any wireless network.


Select the appropriate network you wish to connect to.


Your computer may be attempting to connect to a different Internet connection, preventing you from access the network you desire.


Right-click the wireless icon, select "Search for available wireless networks," then choose the network you want to access.


Restart the computer.


The system may have booted and failed to detect the wireless receiver.

Restarting the computer corrects this issue.


hope this helps

Sep 26, 2012 | Linksys Wirless Router Wrt54gs V7 Router...

1 Answer

Can not connect wireless to internet


verify that the cable are conned correctly. now the ethernet cable that come from the cable modem do not need to be plugin to the port that is label Internet, it need to be plug in any port 1 to 4. then access you router via a ethernet cable and setup the router of wireless access.

Jan 13, 2012 | Linksys Wireless-G Broadband Router

2 Answers

How do i connect to apples time machine?


You can manually configure the time machine to accept wireless signal from the router or extender. If you setup WEP on the router or extender, make sure you setup WEP on the time machine as well.
For instructions in setting up wireless settings of Time Capsule click on this link -->>
http://www.apple.com/timecapsule/wireless.html
Hope this works for you.

Nov 10, 2011 | NetGear WNR2000 Wireless Router

2 Answers

How do u get internet on your wii


Here are step by step instructions on how to connect your Nintendo Wii to the internet. Please note you will need access to a wireless internet connection, or must have a wireless router in order to connect your Wii to the internet. The Wii only connects via wireless signal!

http://www.nintendo.com/consumer/systems/wii/en_na/getOnline/index.jsp

Sep 04, 2011 | Nintendo Wii Console

1 Answer

First time trying to connect to the internet through my wireless router. Do I need a cord attached to Dsi to wireless router to connect the two?


Basically you need to have your wireless router connected to the modem via a Ethernet cable this allows the signal to be received in another part of the house via wireless signals, after you have done this turn on your ps3 and go to network settings, click connect to internet then wireless network. After you have done this make sure you have all the security settings next to you if needed.

Jun 12, 2011 | Nintendo DSi Black Console

1 Answer

How to set up the wireless internet connect on my laptop to this new SBG901 modem?


Short answer: YOU DO NOT.

The cable-modem just converts from the cable-company's signals to/from Ethernet signals.

You use an Ethernet cable to connect the output from the cable-modem to the 'WAN' (or 'Internet') port on a router with wireless capabilities. Then, you configure the router to create your own wireless network, with:
* an SSID ("network name")
* encryption level (use: WPA)
* a password for your network

Then, your wireless device can cite the SSID/password to authenticate to the router.

Feb 24, 2011 | Arris SURFboard Gateway SBG901 DOCSIS 20...

1 Answer

Have 2 computers connected to Netgear WGT624NA router via ethernet connectors and have operated well for over a year. Now have gotten DSL and have run phone line to modem and via ethernet cable have...


Have you tried to reset router. It has to be done in order.
1. unplug router
2. unplug modem
3. shut down computer and restart after waiting 1 min
4. after restarting computer plug power back into modem and wait for all the lights to start blinking
5. after the modem is working plug power back to router and plug in the computer with ethernet cable and make sure you have internet,
6. try to link up with wireless,
If this does not work you will have to setup the router for wireless if it is att wireless you will have to call them to give you the password to set it up.

Jan 10, 2011 | NetGear WGT624 Wireless Router

1 Answer

Linksys Wireless-N WRT150N suddenly stopped being detected


You will need to check the wireless settings of the router
is there any computer connected to the router ?
If yes then you can open the router set up page on that computer.
Router set up page is the page where you can check all the wireless settings of the router.

Click here for step by step instructions

Jan 12, 2010 | Linksys Wireless-N WRT150N Router

1 Answer

Set up


No. You do not need to have a computer connected via a CAT5 (Ethernet) cable to the router for a laptop to access the wireless signal.

However, to set up the router to broadcast that wireless signal or to alter some of the wireless security settings you will have to connect directly to the router with a CAT5 (Ethernet) cable.

If you need assistance connecting to that wireless connection, let me know. I have some instructions which can help retrieve the security information from the router so you can connect to the Internet via the wireless signal.

Mar 20, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Set up 2 wireless routers, 1st for printer, 2nd for internet


You should only need one wireless router for everything. The purpose of the router is to "route" multiple devices together. Your set-up should be something like this:

Modem connected to wireless router via Ethernet cable.
Wireless router broadcasting wireless internet connection.
Computer(s) connected to wireless router via cable or wireless adapter.
Computer with network printer sharing enabled.
Turn on wireless printer.
You should be able to detect the printer via Windows.

Sep 05, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...