Question about Epson Aculaser C1100 Printer

Open Question

My printer keeps saying worn fuser what does this mean?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chanddra2009
  • 615 Answers

SOURCE: WORN FUSER? WHAT DOES THIS MEAN PLEASE

that means there is a fuser unit back side of u r printer this is the main unit where printing happens actually. I think there may be problem with fuser unit...may be paper jam or sensor problem..replace the fuser unit

Posted on Jul 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Black streak down paper on HL 3170 CDW printer


Check the drum cylinder for a) a clot of fiber inside the corona wire channel; b) a groove worn into the surface of the coating. If those OK then check the fuser (inside at the back). Look for either a dirty fuser sleeve or a shiney track worn through the coating on the fuser. Dirty can be cleaned - shiney cannot be fixed

May 12, 2014 | Brother International Brother HL-3170CDW

1 Answer

Error message 093-424


it;s usually an orange feed roller assembly in printer that gets warm and causes toner to cure on paper it is most likely close to being worn as the printer keeps history of how old the fuser is by counting prints or you will start getting paper jams as the feed roller wears down.

Jan 21, 2013 | Laser 3115cn All-In-One Printer

1 Answer

7120 copier. Why is there a recurrent 'replace fuser' message?


The fuser's page count has been depleted. At 100K prints the machine declares the Replace Fuser message because it is almost worn out.

May 11, 2012 | Xerox Office Equipment & Supplies

1 Answer

Printer keep says replace fuser kit


These is a part on the fuser called a fusable link that blows the first power up cycle and resets the replace fuser message. It sounds like the fuser you installed is a remanufactured unit that was not professionally rebuilt. Contact the place of purchase and get a replacement. The message can only be reset with the fusable link on the fuser.

Feb 13, 2012 | HP LaserJet 4700 Printer

1 Answer

So does that mean the upper fuser is wearing out or is worn out? where/how do I get a replacement for the upper fuser?


Do not know where you can buy just heating lamp but can help the rest of the parts, best Fuser Unit (Attention is for 120V) http://www.precisionroller.com/search.php?curr_page=1 Fuser unit 220V : RM1-0561 Hope this help

Oct 27, 2009 | HP LaserJet 1300 Printer

2 Answers

Our HP Color Laser Jet Printer keeps saying 50.2


Hi ellenf971:
Here is your problem.
50.X FUSER ERROR
50.2 error - Fuser Failure (Abnormal Warmup).
Perform the following steps:
1. The connector between the fuser and the
printer is not connected properly. Reseat
the fuser. Check the connector J5013
between the fuser and the printer. Replace
it if damaged.
2. Break in the main thermistor. Turn the
printer off and remove the fuser. Measure
the resistance between the fuser
connectors J5013LA-2 (MAINTH) and
J5013LA-1 (GND). If it is not within the rage
of 330k ohms to 50k ohms (at ambient
temperature), replace the fuser.
3. Break in the fuser heater. Measure the
resistance between the fuser connectors
J5013L-2 (FSRH) and J5013L-1 (FSRN)
with the fuser removed. If it is not within the
rage of 12 ohms to 52 ohms (at ambient
temperature), replace the fuser film unit.
4. Faulty DC controller. PCB Replace the
DC controller PCB
you will have to get an HP certified technician to replace the fuser assembly.

Hope this helps

Jul 17, 2009 | HP Office Equipment & Supplies

1 Answer

Printer dell 1710,paper is always sticking,We used different kinds of papers and they all stick and now all the lights keeps flashing


If by sticking you mean jamming. One cause could be worn pick up rollers or possibly an issue with the fuser assembly.

Jul 06, 2009 | Dell 1710n Laser Printer

1 Answer

WORN FUSER? WHAT DOES THIS MEAN PLEASE


that means there is a fuser unit back side of u r printer this is the main unit where printing happens actually. I think there may be problem with fuser unit...may be paper jam or sensor problem..replace the fuser unit

Jul 06, 2009 | Epson Aculaser C1100 Printer

1 Answer

T8008 printer with message says "replace fuser"


The 'Replace Fuser' message on the 8008 can be cleared in the following way;
• Power the printer Off
• Hold down FORM FEED and ENTER and power the printer on

Keep the FORM FEED and ENTER keys held down until the printer displays SERVICE MENU - INFORMATION

• Press the RIGHT ARROW to MAINTENANCE, and press ENTER
• The Display should read MAINTENANCE - CLEAR FUSER, if it does not press the right arrow until it does and then press MENU/ENTER
• The Display Should now Read CLEAR FUSER NOT EXECUTE, Press the right arrow until the display reads CLEAR FUSER EXECUTE
• Press ENTER, and after a pause the display should read COMPLETED CLEAR FUSER
• Power the printer off and after about 10-15 seconds power the printer back on again.

The message should now be cleared

Jan 12, 2009 | TallyGenicom 8008 Laser Printer

2 Answers

Fuser


this is a too complicated if you a not a serviceman

Feb 04, 2008 | OKI C5100n Laser Printer

Not finding what you are looking for?
Epson Aculaser C1100 Printer Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...