Question about Hobart Welders IronMan 210 MIG 500304A Welder

1 Answer

Will not arc

My ironman 210 has power when you turn it on the fan works the wire feed works but it will not arc when you touch it to the ground and feed the wire.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Check ground connection at welder along with your ground clamp. Bad connection could be the issue. Also check settings on your welder.

Posted on May 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kende weld no arc


make sure your work-piece has a proper ground. and maybe check your gas connection. no leaks. maybe turn gas down.

Mar 27, 2013 | Welding Tools

1 Answer

Mig welder started to arc out on its own. You dont touch the trigger and when you put the wire to the grounded table it blinds the **** out of you. Could use some tips on repair. Thanx. Shane.


Try replacing the feed tip as this is an insulator that keeps the wire from touching the tip as it feeds out. These tips need replacing often as they also provide a friction free surface for the feed wire.

Apr 10, 2011 | Welding Tools

1 Answer

Weld arc not stable. Wire feeds, good ground,


Arc blow could be the cause! Put your ground on the work piece and weld away from it. If you weld toward a ground clamp the magnetic forces will blow your arc around sometime. When taking a cert this simple mistake can make or break ya on your cap or reinforcement beads.

May 09, 2010 | Hobart Handler 140 Mig Welder

1 Answer

Everything comes on and the wire feeds. However it


Check that your ground clamp is connected to the work piece securely.

Mar 14, 2010 | Clarke Power Products Clarke 130EN...

1 Answer

Hobart 210 makes an arc but the wire feed motor won't turn. used very little ,has voltage at motor,worked fine the last time i used it


hi,
maybe you haven't got the wire speed control turned up probly not the answer but sometimes its the simply things.

Mar 02, 2010 | Hobart Welders IronMan 210 MIG 500304A...

1 Answer

I have a hobart ironman 210 that lost all power but no circuit breakers blew switch is working but no power output to cooling fan or gun


take side panel off where power goes into unit,check for voltage ,if not go to where plug is plugged into check for power if there is power check the crows foot to make sure all three wires are tightly screwed to terminals

Feb 02, 2010 | Hobart Welders IronMan 210 MIG 500304A...

1 Answer

No arc, fan works,wire feeds.......ect.


wityh what little imfo you gave I would first go to the main contactor ,turn unit on pull gun trigger see if the contactor pulls in.that is where primary power comes from to create arc.

Dec 14, 2009 | ARC Welding Tools

1 Answer

No arc/ no burn


You need to inspect the ground.Where it connects to the machine, and at the end. I bet one of the connections or the wire itself is damaged.

Jul 20, 2009 | Lincoln Electric LINK2400-+1 CV-305 MIG...

1 Answer

WIRE FEED BUT NO ARC


Turn off welder, unplug and press trigger to discharge any possible stored juice. Then, open side door and check the ground cable where it connects inside, it sounds like either ground or the hot is off. Once you determine those are both securely attached, close door, plug in power on, attach ground clamp to test piece off metal and try it again. Let me know if this helps! Thanks:)

May 08, 2009 | Welding Tools

Not finding what you are looking for?
Hobart Welders  IronMan 210 MIG 500304A Welder Logo

Related Topics:

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Welding Tools Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

oneStan
oneStan

Level 3 Expert

431 Answers

Are you a Hobart Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...