Solve a better solution for Cannon iR5055N if it displays E000732-0001

Hi, it's possible that touch screen is defective .

Hi

Please follow the below procedure to enter Service Mode
1. In standby mode, press the "Settings/Registration" key.
2. Press the "Reset" key.
3. Press the "Back" key.
4. Press the "Settings / Registration" key.
5. The service mode screen is displayed.
Use the "Back" key to exit Service Mode

COPIER> FUNCTION> CLEAR> ERR; and then turn OFF and then ON the power.

Still have an error after following that steps, please call at 1800-204-4427. I can solve you out.

If you wish to get some details; check the site linked here. Pull up older posts..
http://electro-medical.blogspot.com/

In camera setting there maybe a selection that says rechargeable or alkaline

gp605 e001

Hello,

According to Canon this error (E225) is caused by a faulty CIS lamp unit and needs to be replaced.

I wish I had better news.

I wish you luck.

Regards!!

error codes for canon 5055 photocoping machines

The wiring is faulty,short circuit or open circuit.The hard disk drive is faulty or the main controller board is faulty.For reset press: Copier-Display-Jam/Err.

Hello,

You should surely get it checked in the service station.

The nearest service station for you will be.

AS INFOSYS

FIRST FLOOR, PUSHPANJALI COMPLEX,
SAHI MARKET, CINEMA ROAD
GORAKHPUR
UTTAR PRADESH
Tel : 0551-2330480,94153 14552

Regards,
Sammy