Question about Zenith XBR716

1 Answer

Dub VHS to DVD

I own a Zenith XBR716 and I tried to dub my VHS home movie to a brand new dvd-r 16x2hr. The Machine stops at 25 minutes of recording. When I finialize and check the DVD in my computer the properties says the 2 hr disc is FULL. What am I doing wrong?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am not sure why the DVD recorder is stopping after 25 mins of recording. However, once a disk is finalized all the remaining space is unrecordable. That is why your computer is showing the disk as full. The same applies when finalizing a CD. As for the first problem, check to see what record speed you are using. XP is 1 hr, SP 2hr and so on. But stopping after 25 minutes is weird. Even if you use a quick record button, (aka OTR) the recording is usually done in 30 minute increments. Try it again. If it still is only recording for 25 minutes, you may want to contact the manufacture's customer service or tech support. Hope it helps.

Posted on Mar 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dubbing VHS to DVD With Magnavox


If you are trying to dub a commercial (pre-recorded) tape it will not work. If this is not what you are trying to do, get back to us.

Jun 07, 2013 | Magnavox ZV427MG9 DVD Recorder/ VCR

1 Answer

Dvd says cannot record copy protected movie how to fix ?


Depends what you are trying to record? Some TV stations have protection built in so you cannot record. If you are trying to copy a video from VHS to DVD and it's a commercial movie etc then it won't.
You can get a "box" that will get rid of copy protection signals, but only from outside the unit sources. Internal dub to dub protected sources cannot be copied.

Feb 04, 2013 | Samsung DVD-VR357 Tunerless DVD Recorder...

1 Answer

I've dubbed a 27 minute VHS to DVD, but I do not see the finalize option for the DVD. --Zenith XBR716


Make Sure Your blank DVD is compatible with your Zenith Machine Sometime Compagny Promote Specific Lens Size Riding for those type of Machine ... Check On your Manual for Type of DVD your machine Take ..

Oct 07, 2010 | Zenith XBR716

1 Answer

Copy VHS INTO DVD


1. Set up with a new blank DVD.
2. Insert VHS and adjust to the beginning of
your recording.
3. Use the DUBBING button on your remote: you can adjust video quality (2 hours or 4 hours play) at this point.
4. RTFM for use of the PAUSE and DUBBING buttons to skip over commercials etc.

Feb 24, 2010 | Zenith XBR716

1 Answer

The machine will play some DVDs, but frequently


COPYRIGHT PROTECTION FOR DVD`S AND VHS TAPES RENDERS THE ZENITH XBR716 INTO USELESS JUNK. TOSS IT INTO THE TRASH BIN.

Jan 05, 2010 | Zenith XBR716

2 Answers

I have a Magnavox ZV427MG9. I follow all directions in manual for dubbing VHS home movies to DVD but when I try to play the DVD back there's nothing on them.What am I doing wrong?


Depending on the procedure you may be pressing the record button instead of the D.Dubbing or Dubbing button. When recording from VHS to DVD you must first, load the blank DVD and VHS home movies, then play the VHS movies, then PAUSE the VHS movie when you want to START recording... then the only the you have to do is pressing the D.Dubbing button or the Dubbing button. If your VHS tapes starts to play after the Dubbing button is pressed you have been successful in Dubbing.

Aug 13, 2009 | Philips Magnavox MWR20V6 DVD Recorder/VCR

1 Answer

Can't select simple dubbing...


What type of disc are you trying to record onto?

Jun 17, 2009 | Samsung DVD-VR375 DVD Recorder/VCR

1 Answer

VCR DVD Recorder not dubbing


I called the manufacturer and realized I was using the wrong type of recordable DVD disc to dub to. Non copy protected VHS tapes dub just fine as long as I'm using the proper disc.

Jun 03, 2009 | Sony RDR-VX530 DVD Recorder/VCR

2 Answers

VHS to DVD - D-VR4XSU


have u tried the seting on the vcr, you know how u can change the lenght of recording on the vhs

Mar 29, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

RECORDING


On most VCR/DVD Recorder combos there is a quick dub button that you must select the source. Ifyou are recording from a VHS than you need to make sure the button is pressed so that VCR is displayed or lighted or whatever the unit does. If its on ??? Then perhaps its telling you that it is set to record of the DVD which it obviously can't.

Nov 04, 2007 | Zenith XBR716

Not finding what you are looking for?
Zenith XBR716 Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71672 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...