Question about Canon PIXMA iP90v Printer

Open Question

My canon IP90v printer won't print. a message comes up saying to try turning off the printer and than turn it back on, and if that doesn't work look at the manuel.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: canon mp160

First step I would try is; unplug printer usb cable, then power down printer, reconnect usb cable to printer, power printer back on. If all this fails then lets try one other possible fix. Go to start select RUN & type services.msc, ok now you should have a services window that popped up. On the right hand side locate "Printer Spool" and right click on it, then select "Restart". this should refresh your printer spool. Hope this was helpful.

Posted on Sep 05, 2007

Ad
  • 1 Answer

SOURCE: canon i550 printer stoipped printing

My cannon printer no longer responds to any commands. I get 4 yellow blinking lights and then 1 green blinker.

Posted on Nov 12, 2008

  • 226 Answers

SOURCE: Service Error 5C00 - iP90v Pixma Canon Printer

Clean it out underneath the printhead & cleaning mechanism first (paper towel), then do the fix routine.

------------------
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button. (Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button three times, and then release the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.) During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button the 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

5) Press the Power button. The LED lights in green, and the
selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

6) Power off then back on and test.
also there are TWO distinct steps to resetting the TWO ink counters in aan iP90. Enjoy.

3-3. Adjustment / Settings

(1) Service mode
The basic operations are the same as those of the i70 / PIXUS 50i.
In this section, destination settings, how to reset the waste ink counter, and EEPROM information
printing, which differ from those of the i70 / PIXUS 50i, are detailed.



1) Turn off a printer. While pressing the Resume/Cancel button, press the Power button.
The LED lights green to indicate that functions are selectable.

2) While holding the Power button, release the Resume/Cancel button. (Do not release the Power
button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the
Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED
alternately lights in either orange or green, starting with orange.)

4) When the LED lights green, press the Resume/Cancel button as many times as you need, to
select the preferred function. (See the table below.) Each time the Resume/Cancel button is
pressed, the LED alternately lights in either orange or green, starting with orange.
(The color red indicates the changes from the i70 / PIXUS 50i.)

Time(s) LED Function Remarks

0 times Green Power off When the print head is not installed, the carriage
returns and locks in the home position.
1 time Orange Service test print
2 times Green EEPROM information print
3 times Orange EEPROM initialization
4 times Green Waste ink counter resetting Proceed to step 5) below. Once executing step 5), then, move on to step 6) to select the waste ink counter to be reset. (Different from the i70 /
PIXUS 50i.)
5 times Orange Destination settings Proceed to step 5) below. Once executing step 5), then, move on to step 7) to select a
destination. (Different from the i70 / PIXUS 50i.)
10 times Green Return to the menu selection

5) After the function (menu) is selected, press the Power button. The LED lights green, and the
selected function will be performed. (When the operation completes, the printer returns to the
menu selection mode automatically.)


6) Press the Resume/Cancel button the specified number of time(s), then press the Power button.
Time(s) LED Waste ink counter to be reset

0 time Green Main waste ink counter
1 times Orange Platen waste ink counter
2 times Green Main waste ink counter and platen waste ink counter (at the
same time)
Note: When the waste ink counter is reset, print the EEPROM information as shown below,
and confirm that the value of the counter is 0 %.

8


7) Press the Resume/Cancel button the specified number of time(s) according to the destination
listed in the table below, then press the Power button.
Time(s) LED Destination
1 time Orange Japan: PIXUS iP90
2 times Green Other than Japan (A4): PIXMA iP90
3 times Orange Other than Japan (LTR): PIXMA iP90 (LTR)
Note: After the specific destination is set, print the EEPROM information as shown below, and
confirm the model name.


Print sample:
1:iPXXXX 2:V1.02 3:IF(USB=1) 4:D=004.9 PD=000.0 5:ST=2005/09/27-18:30
6:ER(ER0=1000 ER1=5100) 7:LPT=2005/09/028-09:09 8:PC(M=002 R=000 T=001 D=009 C=009)
9:CLT(BK=2005/09/27-18:30 Cl=2005/09/27-18:30) 10:CH=00002 11:CT(BK=040 CL=013)
12:IS(BK=1 C=0 M=1 Y=1) 13:IC(BK=00000 C=00000 M=00000 Y=00000)
14:Power(SON=00009 SOFF=00009)
15:REG=0 16:UR(A(BKoe)=+01 B(Coe)=-01 C(Moe)=+01 D(SCoe)=-01 E(SMoe)=+01 F(BKbi)=+01
G(CLbi)=+01 H(BK-CL)=+01 I(SCLbi)=+01 J(C-SC)=+01 K(M-SM)=+01)
17:WP=0024 18:CDIN(LG=001 PB=000) 19:MSD(015)
20: PAGE(All=00083 PP=00035 HR+MP=00003 PR+SP+SG=00003 GP=00000 PC=00000 ENV=00000)
21:CDPAGE=00003 IRPAGE=00003 BTPAGE=00003 PBPAGE=00000 22:BAT PAGE=00000
23:EDGE=00083 24:L=00000 25:HEAD Temp=30.0 26:Env Temp=30.0 27:FF(3F 3F 3F)
HDEEPROM
1:V0001 2:SN=0000-3D6B 3:LN(00000 00000 000001 000003 00001 00000 00000) 4:ID=00
5:IL=(BK=000 C=+01 M=000 Y=+01 C2=+01 M2=000 Y2=+01)

Printed items:
1. Model name 2. ROM version 3. Connected I/F (USB1) 4. Main waste ink amount, Platen waste ink amount
5. Installation date 6. Operator call/service call error record 7. Last printing time 8. Purging count
(manual/deep/timer/dot count/print head installation and removal/ink tank installation and removal)
9. Cleaning time 10. Print head installation and removal (change print head) count 11. Ink tank installation and
removal (change ink tanks) count (Bk/CL) 12. Ink status (Bk/C/M/Y) 13. Total ink consumption 14. Power-on
count (soft power on/soft power off/hard power on) 15. Print head alignment implementation 16. User print head
alignment values (Bkoe/Coe/Moe/SCoe/SMoe/BKbi/CLbi/BK-CL/SCLbi/C-SC/M-SM) 17. Number of times of wiping
18. Number of times of camera port connection and removal (Legacy, PB) 19. Number of the maximum printing
intermission in days 20. Number of print pages (total/plain paper/high resolution paper + Matte Photo Paper/Photo
Paper Pro + Photo Paper Plus Glossy + Photo Paper Plus Semi-gloss/Glossy Photo Paper/Card/Envelope) 21.
Number of Camera Direct Print pages (total), number of IRDA print pages (total), number of Bluetooth print pages
(total), and number of Print Beam print pages (total) 22. Number of print pages using battery (total) 23. Number of
borderless print pages 24. Number of print page (L/4” x 6”) 25. Print head temperature 26. Inside temperature
27. Line inspection information

HDEEPROM
1. Version
2. Serial number
3. Lot number
4. Print head ID
5. Ink ejection level (Bk/C/M/Y)

Posted on Jul 23, 2009

richard191
  • 691 Answers

SOURCE: I can not print on my canon iP90v. I try to

You could either kick it or try this (less expensive) trick:

  1. Click "start" and go to "Run"

  2. Type "services.msc" at the prompt which will open the Services
    window (ooh, pretty...)

  3. Scroll down the alphabetical list in the right window pane until you come
    to the entry with the name "Print Spooler"

  4. Right-click this entry, then select "stop". This will stop the computer
    running the process that holds your print queues.

  5. Leaving that window open for now, click again on "Start", and then click
    "My Computer" to open a Windows Explorer window.

  6. We've stopped the queue service, now we just have to clear the jam that is
    already there. To do this we navigate to the print spool folder which is hiding
    within the Windows folders. Usually Windows is installed on C: drive, but you
    should be easily able to tell when the Explorer window opens which drive it is
    on.

    The usual path to the spool folder is
    C:\WINDOWS\system32\spool\PRINTERS, but yours may be slightly
    different. Your windows drive may have another name for instance, but this would
    be uncommon. So click on your Windows drive (usually C), then double-click on
    the Windows folder, and then find the System32 folder and double-click on
    that. Windows may warn you that you are about to view system files, but click
    "View files anyway" message and search out the "spool folder". Within the
    Spool folder is your Printers folder, and you should open
    that.

  7. Delete every file within this folder to empty the jammed print queue
    (pressing the "ctrl" and "a" keys will select all files and then you can just
    hit "delete").

  8. Close the explorer window now that we have emptied the cleared spool files,
    and return to your Services window. we must re-start the Print spool
    service, and do so by right-clicking the Print Spool entry and selecting
    "Start" from the list. Close the services window and try printing again

Posted on Nov 10, 2009

  • 1768 Answers

SOURCE: I dropped my Canon ip90V printer

When the printer unit was dropper you probably misaligned the sensor in the transfer tray and there more internal damage.
Repair or replacement is is the next step.

Posted on Jan 29, 2010

Testimonial: "Any ideas on cost to fix it"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IP90v printer wont print


If the message is that your battery is dead - it needs to be recharged. You should have a cable with a transformer and plug to connect the printer to mains power. The same cable will plug in to the battery to recharge it. There are very few machines that draw power from a computer or laptop.

Sep 14, 2012 | Canon PIXMA iP90v Printer

1 Answer

I have a Canon Pixma ip90V printer and every time the printer starts to print it shuts off; any suggestions what to do?


Sounds like it is either the power supply or the board.

Try disconnecting the power supply (unplug the printer) for about 5 minutes. Reconnect and turn it on. If this works it will probably not be a long term fix. Sounds like your in for a new printer or power supply for it soon. Did you have a electric outage recently? Or power surge?

Mar 28, 2011 | Canon PIXMA iP90v Printer

1 Answer

IP90v Canon Portable Printer with "waste ink absorber full" message and has now quit printing. What to do about it?


Canon's support site for this issue is: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_ip_series/pixma_ip90v#ServiceAndSupport. It says you have to have a service tech change this filter thing AND also reset the counter to have it work again.

Feb 03, 2011 | Canon Office Equipment & Supplies

1 Answer

I have a Conon IP90v printer and the ink absorber waste is full and now it won't print.


Hi there you can try.
Following step by step resetting canon Pixma iP90 :
  • Before resetting printer canon iP90, start with printer power off.
  • Press resume button coincide with power button.
  • While pressing power button, release resume button.
  • Press resume button 2 times and then release both button
  • Green LED indicator will blinking and then stopped blinking.
  • When the Power LED lights in green, press resume button 4 times.
  • Press power button and the printer power will off. Otherwise off, depress again power button.
  • And the turn on the printer again, your printer canon iP90 should be response as normal.
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 11, 2010 | Canon PIXMA iP90v Printer

1 Answer

I dropped my Canon ip90V printer and it no longer prints. I get an error message and it flashes amber with the green. It says to turn the printer off which I did. When I turn it back on it cycles one...


When the printer unit was dropper you probably misaligned the sensor in the transfer tray and there more internal damage.
Repair or replacement is is the next step.

Jan 29, 2010 | Canon PIXMA iP90v Printer

1 Answer

Print head locked to far right position on Canon ip90v. Will not reset to center, even after repowering.


The heads run on a thin belt and if it has not come off that belt then you can try by hand moving it back to the centre but dot push to hard on it not want to breack it.
But do this with the power off

Jan 23, 2010 | Canon PIXMA iP90v Printer

1 Answer

Updating software problem with Canon iP90v


Re-install the printer driver of your Canon iP90v using the CD installer of the printer.

Nov 14, 2007 | Computers & Internet

Not finding what you are looking for?
Canon PIXMA  iP90v Printer Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...