Question about Sunbeam OCK-SI OVERCLOCK COOLING KIT (SILVER)

1 Answer

Safety stitch thread breaking - Sunbeam OCK-SI OVERCLOCK COOLING KIT (SILVER)

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 23 Answers

If the device is still under warranty, return it to the store you purchased it from or contact the manufacturer to RMA it.

Posted on May 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Stitch failure


try these suggestions
The top thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle
8. Try a different spool or cone of thread

Apr 11, 2013 | Sewing Machines

2 Answers

The bottom stitching looks like a line and not stitches the top stitching is fine


whether its bias or straight does not matter to machine. loosen the bobbin tension and put more tension on take up spring by inserting a screwdriver in the slot of the top thread tensioner. turn to right.

Dec 13, 2012 | Juki DDL8300N Sewing Machine

1 Answer

The bottom stitching looks like a line and not stitches the top stitching is fine


try adjusting the top thread tension and see if that helps
also try changing the thread.
also change the needle--make sure it's the right needle for the fabric
being sewed.

Dec 13, 2012 | Juki DDL8300N Sewing Machine

1 Answer

Thread breaks and skips stitches


Open the needle plate, remove the bobbin and bobbin case.....refer to your manual.

Clean away lint and threads.

Thread with the presser foot up.

If this continues, take the machine and samples of the mis-stitching in for service. It could be the timing needs to be adjusted by a professional.

Feb 20, 2010 | Husqvarna Viking 1

1 Answer

The machine pulls the cloth while stitching


Probably your needle and bobbin thread tensions are too tight. Cotton thread breaks easily under tension. Use less pressure on the presser bar and a smaller stitch length may help.

Aug 20, 2009 | Brother Sewing Machines

2 Answers

Free motion quilting skipped stitches, breaking threads


Might be that you need to lower the tensions quite a bit, you'll have to juggle with top and bottom tensions though, and experiment for just this operation with the Sensormatic.

Mar 27, 2017 | PfaFF Sewing Machines

2 Answers

CONSEW 206RB5 TOP THREAD NOT FORMING STITCHES AND BREAKING


you have your thread tension too tight that's why it is pulling the bottom stitch all the way through it looks good from the bottom but not good on top. Its pulled the stitch all the way through the material.
I had my own upholstery shop 18 yrs and tension gets you every time.Just loosen the top tension.

Jan 18, 2009 | Euro-Pro 8260 Mechanical Sewing Machine

2 Answers

Thread continually breaking in lower looper needle


I was having this very same problem with my lower looper . I had been using the one needle stitching all afternoon and I was doing quite nice stitching. then I decided to put the right needle back in and do some overlock stitching and guess what I spent the next two hours fighting the looper problem. I had completely re-thread this machine at least 20 times now. I decided to take the needle out and re-insert it and re-thread it one more time (right lower looper- then upper looper- right needle- then left needle) was careful to pull all threads to the back and under the presser foot for about 6 inches.
Held on to the thread, lowered presser foot and did the chaining stitch. BINGO it didn't break, tried it with a piece of cloth and Perfect stitches. I have a Babylock BL402 and used tension settings left to right
4-3-3-3 and default settings for the rest.
Hope this helps someone someday.
Jo Griffith

Oct 20, 2008 | Toyota TL-432DE Mechanical Sewing Machine

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Sunbeam Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...