There is a twinkling yellow light from "super" in the display. I have drawn the freezing-chamber a little from the wall to increase ventilation. It does not help. What can happen?

This happens when the vacuum in the manifold is at maximum and the air is drawn down past the valve stems into the combustion chamber. IT takes oil with it and so when you increase the RPM's ( moving off at lights)the burnt oil in the exhaust is expelled as a cloud of smoke . The fix here is to replace the valve stem seals that have gone hard/cracked and are no longer sealing on the valve stems

Start lowering down temperature, you may need to defrost fridge overnight.

have the internal power supply examined for bad caps or missing voltages.

it depends on the brand and model number of your set

it could be a lite blue colour that looks white,if so then the car is burning a little oil,the valve seals are probably dried out and allowing small amounts of oil to be drawn into the combustion chamber past the seal and valve guides when the car sits and when started up the oil gets burned in the combustion chamber.if its white smoke then it could be a small head gasket coolant leak.

That is the card access lamp. It should light briefly when you insert a card and when you take a picture. If it's constantly blinking, something is wrong. Try removing and re-inserting the card. Try a camera reset with no card in the camera. Try downloading the pics to your computer and then formatting the card in the camera to completely erase it.

this is called a yellow light of death(YLOD) it often occurs when your ps3 doesn't have enough room or space to ventilate or breath properly. this causes the system to over heat thereby displaying a yellow light. here are a few links you can go to so as to see how to go about it.
http://www.youtube.com/watch?v=nZMQq1Voy8E

if this doesn't really work for you, you can go through youtube for more videos or go through the comment for more info.
hope this helped you? please rate

On a 4.0L or 4.6L V-8 engine, the PCV valve is on the back of the engine. Follow the black hose running to it just below the coil pack. On Explorers with a 3.0 L V-6, the PCV valve is on top of the engine on the right-hand side valve cover, installed in a rubber grommet with a black rubber hose running to it.

Increase the size of the font in your phone's display settings. The precise menu will vary by phone, but most commonly you would access it by going first to "Main," then "Settings," and selecting "Display." Larger fonts will have heavier lines, and may be drawn with a border, both of which will make the fonts stand out better against the background graphic.

unplugg the appliance for 1 hrs. let the pressure balanced then check the distance to wall and ventilation are okay increase the distance.restart.