Question about Nintendo Wii Fit for Wii

2 Answers

The screen message says to step off the wii fit and press A. when you step off and press A the message comes up again

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

Check what your placeing the board on it needs to be a floor that is flat and hard not some thick carpet ect. it probably cant initialize because it isnt getting a balanced reading. Or batteries are to low also could be an issue maybe your to far from the wii sensor or stuff is blocking it from reading and giving a proper signal.


Posted on Apr 28, 2010

Testimonial: "Good advice but unfortunately hasn't sorted the problem out"

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

It is not low batteriesThe screen message says to step off the wii fit - 2_bing.gif and is not line-of-sight "stuff" in the way.
Bluetooth2_bing.gif is RF not IF; does not need line-of sight. The problem is in the sensors in the feet of the board. Pick the board up, click "A"; set the board back down and it starts to work. It misses footsteps during the exercise; hence, bad sensors. Crappy design is the problem. Some break sooner, some break later. Not an overweight user issue either. Replace or repair might fixit.

Posted on May 15, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My wii balance board keeps saying "please step off and press a" even though I'm not even touching it. Whe you press a all it does is give the same message over and over again. I've tried taking...


Hi there.

You may want to re seat the sensors. I have written a great tip with video about this.

Let me know what happens.

Thank you for using Fixya!

Apr 18, 2011 | Nintendo Wii Fit for Wii

1 Answer

New crown compatible wii fitness board will not sync with wii console. board only blinks a few times then switches off


Have new crown compatible fitness board, new batteries inserted, inserted Wii fitness disc, choose training, then trial, choose hula hoop game, used remote press A to start.

Screen says place me on a flat floor and press POWER button before stepping onto me

Followed the instructions power button flashes blue, as do the four corners then the lights go out - then nothing happening, still have the same message place flat on floor etc....

Have also tried the Wii Balance Board Check - followed all instructions last one says please turn on power. Pressed button flashes blue as do four corners then they go out

Am I doing something wrong or Is this a faulty board ?

Thanks

Sep 27, 2010 | Video Game Consoles & Games

1 Answer

I keep getting the message to "step off and press A" for the body test.


You need to step off the pad, wait until it tells you to step on. Then you push A to conduct the body test. If your pad is turned off push the button on the front of the wii fit pad then repeat the first steps i described.

Aug 03, 2009 | Nintendo Wii Fit for Wii

2 Answers

Wii Fit disk will not eject


Fiend your solution direct from nintendo. Here is your solution....
9047829.jpg

http://www.nintendo.com/wiiconsole/prob676ijt65/solution

aqwtr-101

Jun 13, 2009 | Nintendo Wii Console

1 Answer

"Step Off Me and Press A" message while not on wii board


When you get this message, lift the board off the ground, press A, and wait until you get to the confirmation screen before placing the board back on the ground. You may have to try a few times to get the timing right. I have no idea why it thinks someone is on the board, but this workaround has solved the problem for us. Good luck.

Jan 04, 2009 | Nintendo Wii Fit for Wii

1 Answer

'step off me and press A' message when not on - cant get further


HI HAVE THE SAME PROBLEM ( STEP OFF ME AND PRESS A MESSAGE )

ANY BODY WITH THE ANSWER TO THIS PROBLEM !!!!

ONLY GOT THE WII FIT FOR CHRISTMAS 1 WEEK OLD !!

Dec 28, 2008 | Nintendo Wii Fit for Wii

3 Answers

Power


    Try these steps!

  1. Insert a Wii Balance Board compatible game disc in the Wii console.

  2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

  3. Open the small SD Card slot cover on the front of the Wii console.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
  5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.
  6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.
  7. The blue light will stop blinking and stay on steady once the syncronization is complete.

Sep 09, 2008 | Nintendo Wii Fit for Wii

2 Answers

Wii fit


I found this on a related post, but it should help:

Hi,
After posting my message here I started to fiddle around with the wii fit again and went slowly step by step through the synchronisation steps. Voila it works! what I had done wrong was that I did not press the red synchronisation button for the wii console when the blue lights (after pressing the sync button) on the wii fir board started to flash. you must do this when they are flashing. Hopefully you are as lucky as me and it will work for you too.

Aug 25, 2008 | Nintendo Wii Fit for Wii

Not finding what you are looking for?
Nintendo Wii Fit for Wii Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles & Games Experts

Bee Santiago

Level 2 Expert

268 Answers

Raj Patel

Level 3 Expert

916 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...