Question about LG WM-2277HW Front Load Washer

1 Answer

Spinning cycle My LG TROMM WM2277HW leaves soapy water in clothing after stopping spin cycle prematurely leaving clothing soapy and wet. It reads OE. We opened the filter at the bottom of the machine, drained the water and cleaned outt he filter (which was already clean) and restarted the load. still continues to do the same. washer wont spin after wash

Posted by on

  • Anonymous Mar 24, 2014

    The machine shows a code of (ie or oe) after washing cycle has completed. How do I clean the drain filter.

  • Anonymous Mar 26, 2014

    Would not spin cleaned filter the machine then did one wash cycle okay then stopped spinning again

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 796 Answers

Keeping in mind that the soap & bleach gets dispensed into your wash on the second to last rinse cycle and that most all rinse cycles are in cold water. Is your cold water valve screen plugged causing your washer to rinse poorly? Are you using the HE detergent? If not maybe the washer is sudsing up to much and having a hard time rinsing all the suds and bleach out and leaving the clothes soapy.

Fill the washer up with no clothes in it on a cold/cold wash setting does it take a long time to fill the washer up? Also when it is full and agitating is there suds in the washer?

Last suggestion is if the drain is hose is a lot higher than the top of the washer it might have a hard time draining out all of the soap water before the next load

Posted on Mar 23, 2008

1 Suggested Answer

  • 156 Answers

SOURCE: spinning cycle

usey only takes about 2 tbs soap ather than that bad main board make sure you have cold water going in washer

Posted on Feb 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LG Tromm front loader has an OE error message and isn't spinning. First received the message during a full load of laundry. Had to drain the water from the hose at the bottom and finally got it unlocked...


OE is normally down to blocked drain pipes, mcalpine (connection under the sink) or a blocked front filter. empty the machine and unscrew the filter behind the flap at the bottom right hand side, check for any obstructions, icoins, hair grips etc are normally blocking here

Apr 10, 2014 | LG WM-2277HW Front Load Washer

1 Answer

I have an lg wm1814cw front loader with a ue code


Probably the pump filter is blocked.Make sure the machine is empty...Access filter via small door at floor level. Unscrew the filter cap, and clean filter. check that there isn't a coin stopping the impeller vanes. ...When you take the cap off, any water left in machine will flow out!! Leaning the machine back can help.....Good luck...Nomess

May 16, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

My Hotpoint Aqualtis washing machine leaves


the drain **** in the machine is partially clogged. my best guess is at the water pump. your washer needs to be serviced. call a serviceman..

Nov 15, 2009 | Washing Machines

1 Answer

Shows OE error. Won't spin


if its only 6ths old call out the manufactures.

Sep 28, 2009 | LG WM-2277HW Front Load Washer

1 Answer

LG Tromm WM2277HW during high speed spin makes noise


I had exactly the same symptom...grinding noise only during high speed spin cycle.

I took the top and back panels off to see how the drain hoses etc. connected. Not wanting to take it apart further, I eventually just took the washing machine outside (I knew I was going to be dealing with water!), pulled the debris catcher front side bottom, and let rip with a garden hose inside the drum with the catcher out (leaving an open drain that could flow unimpeded).

Water flowed quickly out of the open drain, and lo and behold, a small drill bit came out with the water flow. This bit, presumably had gotten through the drum grating, and was resting on the bottom of the housing, scraping and grinding when the drum was spinning.

Aug 16, 2009 | LG Washing Machines

2 Answers

Error Message and Tub not spinning


UE is likely an unbalanced load or load is too large. Reduce the size of the load and your issue should be resolved.

Jul 21, 2009 | LG WM-2277HW Front Load Washer

3 Answers

My lg intellowasher wd1290 error code OE


I think your "OE" is really a "DE" or drain error. Open the access door on the lower left of the front panel on the machine, drain the remaining water with the small drain hose there, and unscrew and remove the larger thing, which is a filter. Clean filter. If filter was not blocked, check for loose impeller on drain pump motor, which requires replacement of drain pump motor. (just sticking it back on will result in it coming off again)
If this helps, a "fixya" rating would be appreciated. Thanks.

Sep 21, 2008 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

2 Answers

LG WM2277HW trouble


take off the front kick plate on the bottom and there is a pea trap thats conected to the pump twist it off and see if it is cloged thats what usaully makes it not spin

Aug 11, 2008 | LG WM2688HWM TROMM SteamWasher

1 Answer

Spinning cycle


usey only takes about 2 tbs soap ather than that bad main board make sure you have cold water going in washer

Feb 24, 2008 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
LG WM-2277HW Front Load Washer Logo

1,126 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...