Question about Belkin (F5D7230-4) Router (587009)

2 Answers

Trying to set up a security code for my wireless router.

Got to the page 162.168.2.1 typed my password. Now the password does not work and I cannot open the wireless belkin network. its aking for a password also that has 5 --13 characters. The one that we gave the computer has more it asked about 32 characters.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 12,061 Answers

NO that is you WAP KEY, the login and password, are usually admin admin, unless you changed it. Then to get a WEP/WAP KEY, you go to security, and "Generate" one. Then you need to copy/paste this "Key" into a notepad document, save as key.doc, now when you have saved everything in the router, you then need to log into the WiFi or Ethernet Network, you will be asked for that "Key" you can now copy/paste back, the key from your notepad document into the Field, provided. I have included a link, for your user manual, you need to have a look in there and it shows you step by step how to login, and setup your router. (That 32 Character number, is a HEX representation, of the 128 bit WAP/WEP key, code that is used) www.belkin.com/support/article/?lid=en...f5d7230-4... -

Posted on Apr 23, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 132 Answers

Go here to download the approproite document:

http://www.dlink.com/products/?tab=3&pid=DI-514&rev=DI-514

Don't forget to vote

Posted on Apr 23, 2010

  • MyPC Solutions
    MyPC Solutions Apr 23, 2010

    Disregrad last post



    If you have forgotten your wireless password, you may have to reset your router....



    Step 1. Grab yourself a pen ot something very thin.



    Step 2. On the router, locate the "reset" button



    Step 3. Hold the reset button down with the thin object for about 10 seconds...or until all the lights on the router light up



    Step 4. Your router will be reset to factory condition.



    Don't forget to vote.

  • MyPC Solutions
    MyPC Solutions May 02, 2010

    Did my solution help solve your problem?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need to set a password for my Linksys Wireless-G WRT54G Router, but the websited 192.168.0.1 to set the password isnt working. I need help ASAP. Thank-You


to access the router page for linksys, you need to type 192.168.1.1 on the address bar. username is " admin " password is " password " if it doesnt work, try "admin" for username and "admin" for password. then it would take you to the router page. and you can start configuring.

Sep 09, 2011 | Linksys Wireless-G WRT54G Router

2 Answers

How do I set up passwords


Hi,

Welcome to Fixya. If you need the secure the router you need to access the Wireless Settings Page.

To access the router page just open a browser then type 192.168.1.1, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Wep Key. The Network Key or Wep Key serves as a password or security code on your network to make it secure.


If you have questions please let me know. Thanks for using Fixya

Mar 08, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

I need my security code for my cisco valet wireless router plz help


Hi,

Welcome to Fixya. If you need you Security Key or Password (Network Key) on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.1.1, the Default username is admin and the password is admin. Go to the Wireless Settings and you'll find the Network Key or Passphrase (Security Code). You can alsoThen Personalize you Network Key or Passphrase so that you can easily remember it.


Thanks for using Fixya.

Feb 25, 2011 | Cisco -Valet Wireless Router

2 Answers

Want to connect wireless printer but i need WEP key so the printer can connect on same wireless connection


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 07, 2011 | NetGear DG834G Router

2 Answers

Idid the steps and say its connected but nothing to be trust I don,t want anybody get my internet I don,t know is th router get the password


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 07, 2011 | Linksys Wireless-G Broadband Router

2 Answers

Lost security code for wireless linksys router


Hi alockklock2,

If you want to obtain the password or security on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.1.1, the Default username is blank and the password is admin. Go to the Wireless Tab select Wireless Security under the Security Mode you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure.

You can also reset the router to its factory state but you need to keep in mind that all settings will be back to its default settings. To reset the router press and hold the small reset button at the back of the router using a Pen or a Paper Clip for 15-30 seconds.

If this works dont forget to say thanks. Thanks for using Fixya.

Feb 05, 2011 | Linksys Wireless-G WRT54G Router

1 Answer

How do i get my ssid code


By default, the SSID of the router is NETGEAR, and the wireless security is disabled.

However, if you have already changed the default settings on the router, then you can check the settings by accessing the setup page.

In the address bar of your web browser, type 192.168.1.1. Or if this doesn't work, type www.routerlogin.net.

Default username is admin. Default password is password.

Once in the setup page, go to Wireless Settings. You will see the SSID and wireless security settings.

I hope this helps!

May 17, 2010 | NetGear Computers & Internet

4 Answers

My PS3 is asking for a wpa key code so I can go online?


If you dont know your wpa network key try to reconfigure your wireless network again.

Access the configuration page of your router.
>Type on the address bar 192.168.0.1
>On login type Admin leave password blank. if you set up a password or the login page use that one.
>Once inside the Dlink Page
>Clik Setup and on the left side click wireless setting.
>If given the option to click on manaul wireless connection setup click on it.
>Once you have the wireles window
>try to change the network name to a new one and scroll down
>Under security choose WPA security (enhanced)
>Scroll down and under the Passphrase type in your new network password or security key and confirm it.
>Click on Save Settings
>If it asks you to reboot then reboot it, if not, its ok.

Jan 26, 2009 | D-Link RangeBooster G WBR-2310 Wireless...

1 Answer

Can't connect


The only way to get the security code is to access the router's setup page. On your wired PC, open Internet Explorer, type http://192.168.2.1, type in the router's password. Go to Wireless settings and look for wireless security, you can see the wireless code there.

Jan 20, 2009 | NetGear WGR614 Wireless Router

2 Answers

Kinksys wireless router


You mean wireless security password?

To enable that, do the following steps.

1. Open Internet Explorer and type http://192.1680.1.1 on the address bar
2. It will prompt you for username and password. By default, no username and password is admin. If the default password didn't work, try to type your own password for the router.
3. When you get to the setup page, click on WIRELESS tab on the top. Then click the sub-tab WIRELESS SECURITY under that.
4. Choose WPA-Personal for the Security Mode
5. Type now your desired password on the Shared Key or Passphrase box. Password should have minimum of 8 characters. You should remember that password or write it down.
6. Click on Save Settings at the bottom of the page.

You're all set with new password.

Oct 30, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
Belkin (F5D7230-4) Router (587009) Logo

261 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...