Question about Samsung SyncMaster 940BF (Black) 19" LCD Monitor

2 Answers

Broken mount on back of monitor to base

Broken mount , aluminum die cast pivot broke off?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Samsung Master
  • 848 Answers

Broken mount on back of monitor to base? This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:
BIZET 17A Samsung BN44 00123A Power Supply Backlight Inverter

Posted on Dec 19, 2014

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 634 Answers

The easiest solution would be to epoxy the mount back though you may loose ability to tilt monitor, be sure not block any air holes. when setting together tape it to proper spot and let set for recommended time on epoxy(get at hardware store).

Posted on Apr 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Impacts of Vacuum Die Casting Technology on Aluminum Alloy Die Castings?


Aluminum alloy die casting is the casting process that injecting the high temperature molten aluminum alloy liquid into die cavity with high pressure and high speed for moulding. Features of this casting method are product precise forming and high production efficiency. However, the conventional die casting process is defective. Because the gas in the mold cavity cannot be eliminated effectively, the gas in the mold cavity cannot be eliminated effectively, and the inner parts of the casting can be left to form the defects of the pores, to make the mechanical property of the casting poor. In order to solve this problem, people use the method of vaccum pumping, that is, the gas in the cavity of the die casting can form a certain vacuum or negative pressure state, thereby reducing the inner hole defect of the casting.

Dec 21, 2016 | Cars & Trucks

1 Answer

I broke the table top base for my new Haier HL32XSL LED LCD tv and can not find a part number or place to order a new one.


If it is not practical to glue the base back together with metal-filled epoxy (e. g., J-B Weld), then consider whether you can adapt the hardware to a custom wood base. If you are not comfortable with your woodworking skills, any cabinet shop could probably make a base for you. Be sure to include space for the base weight in the bottom of the wood plate, and specify that it must be capable of supporting the set. (The entire weight of the set including the original stand is 50.7 pounds; subtract the weight of the stand to find the minimum support capacity.) If the vertical arm broke, it may be better to replace it with steel or aluminum channel or tubing.

If the original stand mount scheme is not amenable to a hardwood base, you can build a stand to use the wall mount holes in the back. Be sure to offset the base weight forward enough so the weight of the mounting bracket doesn't tend to tip the set backwards.

May 24, 2011 | Haier HLH326BB 32 in. LCD HDTV

1 Answer

How do you take the base stand off of an envision 22in lcd tv? I want to mount it to the wall?


There is a screw on the part of the base where it connects to the monitor back, it is located on the pivoting arm, remove or take loose this screw and lift the base by holding the side opposite the screw. the base should lift off with at very most just a bit of wiggling. You can now use the wall mounting screw holes located under the corners of the sticker on the rear of the monitor, they are usually covered with a perforated area.

Jan 16, 2011 | Envision H22W 22" Monitor

2 Answers

Benelli scooter- The kickstand spring fell to the ground Where does it (re)attach to? M 50 scooter not listed in products


there should be a small pin with a knob on it near the stand pivot bolt, it may have broken off and might need welding

Apr 04, 2010 | 2008 Benelli Velvet 150

1 Answer

Broke a piece on the base where the bolt is. can i replace it?


Is the break something that can be epoxied back together? If the pivot is broken I would just get a replacement unit. The base may be made from pot metal that can not be welded.

Jul 01, 2009 | Qep Tile Cutter 19"

2 Answers

Broken hook on RM125 engine that holds clutch cable in place


You can see if it could be welded back on. It would need to be somewhere that can weld aluminum. If it is on a cover, replace the cover.

May 29, 2009 | 2003 Suzuki RM 125

1 Answer

BROKEN MONITOR BASE


The 4 holes on the back are standard and you may find on the web, a monitor mount. You could also search ebay for the exact same monitor with a broken screen and get it very cheap and use the base off it.

Nov 01, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

Azmouth axle (lower mounting) broken off base


I have done this on another DS mounting as a deliberate modification. In your case I would see if I could get a replacment as it might cost less assuming your time is worth anything. In my case I made a modification and I cut the casting web which I suspect is what broke on yours. Either you had it knocked over or you trie to mount too much weight??? Anyway since yours is a break the precision of the repaire would be in question so geting a repair part would be my first inquiry. Otherwise your fix will be similiar to my modification which was successful!
Best,
Rick

Jul 23, 2008 | Meade DS-2114 ATS (325 x 114mm) Telescope

Not finding what you are looking for?
Samsung SyncMaster 940BF (Black) 19" LCD Monitor Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...