Question about Performance Teknique ICBM-5612 Car Subwoofer

1 Answer

Performance teknique ICBM-5612

I need to know how to take it apart..

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Whats yhe Rms on this sub? Which is better compared with the 5712 modle?

Posted on Jun 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need box dimensions for 12 inch performance technique icbm-5912 car subwoofer


I have the same sub on the "digital" amp from the same company.

I used the 1.75 ported box from my jl 12w3v3-4 and it sounds great. I am not sure on the correct box size but the box for the 12w3 sounds great. I tried emailing performance and the email was wrong.

Feb 26, 2012 | Performance Teknique ICBM-5912 Car...

1 Answer

I need to know if the specifications for the Perfomance Teknique ICBM-5712DX RMS total wattage is for both coils or per coil. The RMS total wattage rating is 500 watt


The 500W RMS total wattage is for both coils combined. If you want to get REALLY specific, all of the industry-specific specifications are as follows.
  • 12" Dual 4 Ohm Peformance Subwoofer
  • Power Handling:
    • Peak: 1000 watts
    • RMS: 500 watts
  • Impedance: Dual 4 ohm
  • Reinforced aluminum curvilinear cone woofer
  • Oversized butyl rubber surround
  • 5 spoke Die-cast aluminum basket
  • 2" Flat ultra excursion spider
  • Industrial Chromed Hex bolt retained T-Yoke
  • DC resistance (Re): 3.2 ohms each coil
  • Frequency range: 20 Hz-1.1 kHz
  • Fs:30 Hz
  • QTS:.526
  • QES:.614
  • QMS:7.698
  • VAS:56L
  • SD:.0491M
  • SPL: 89.58 dB 1W/1m
  • Xmax:16mm
  • Mounting Depth: 160 MM
  • Mounting Hole Dia.:282 MM
  • Mar 01, 2011 | Performance Teknique ICBM-5712DX 12in Car...

    1 Answer

    Need to if this sub is 2000 watts because i need to know what the ohms are


    You can find out the ohms with a digital multimeter. Just make sure it actually does ohms!

    Nov 02, 2010 | Performance Teknique ICBM-5912 Car...

    1 Answer

    What is the air ratio for this sub for a custom sealed box


    depends on the shape of the boc but a generalised Cuft for this sized sub and what its rated at is about 2 1/2 Cuft for a ported box and 4-5 Cuft for a sealed box.

    Jun 21, 2010 | Performance Teknique ICBM-5612 Car...

    1 Answer

    Dont know how to connect daul voice coil on a icbm-5612 performance teknique.


    If you want a 2 ohm total load..wire it from the amp positive(red) to the first coil positive(red) and then to second positive(red). Amp negative(black) to first coil negative(black) and then to second negative(black). This will give you a 2 ohm total load on the amp.

    Apr 21, 2010 | Performance Teknique ICBM-6112 12" 4 Ohm...

    1 Answer

    WHAT KIND OF AMP SHOULD I USE ON SOME ICBM-5612


    You can use any type of amp as long it can drive at least 1000 watts and it 2 ohm, 4 ohm or 8 ohm stable.Here is the specs on the woofer:
    • 12" High Performance Subwoofer
    • Rubber Seal Gasket
    • High Temperature 2" 4 Layer Voice Coil
    • Air Vented Aluminum Fomer
    • Dual Voice Coil ( 4 ohm + 4 ohm)
    • Large Foam Edge Surround
    • Bumped Plated For Maximum Excursion
    • Excellent For Sealed and Bandpass Enclosures
    • 70 Oz Magnet Structure
    • 1000 Watts Max
    • Frequency Response: 25Hz-800 Hz
    • 2 Ohm / 4 Ohm/ 8 Ohm Operation
    • Screw Block Terminal
    Also check this website for how to wire it to 2, 4 or 8 ohms: http://www.bcae1.com/spkrmlti.htm

    Dec 26, 2009 | Performance Teknique ICBM-5612 Car...

    1 Answer

    Wiring 12" icmb-5612 preformance teknique subwoofer


    That sub has dual 4-ohm voice coils. It can be wired either as 2-ohm, 4-ohm, or as 8-ohm.

    2-ohm = voice coils in parallel (both positives and both negatives connected to your speaker amp out wires).
    4-ohm = use only 1 voice coil (either is OK).
    8-ohm = voice coils in series (connect the positive of one voice coil to the negative of the other and connect the remaining positive and negative to your speaker amp out wires).

    Mar 24, 2009 | Performance Teknique ICBM-5612 Car...

    1 Answer

    Im trying to find RMS specs for PERFORMANCE TEKNIQUE CBM-5712 SUB


    WELL FIRST IF THEY ARE DUAL VOICE COILS, IF SO,TO GET 2 OHMS JUS THOOK THEM UP TO ONE OF THE TWO TERMINALS, IF YOU WANT 4 OHMS HOOK YOUR POWER LEAD TO ONE TERMINAL THEN ABOUT THREE FEET OF WIRE COMING FROM YOUR LEAD TO THE O9THER TERMINAL, IF YOU WANT 8 OHMSHOOK YOUR POWER LEAD TO + ON ONE SIDE THEN THE NEGITIVE LEAD TO THE - ON THE OTHER SIDE, THEN VISE VERSA. BUT IF I WHERE YOU MAKE THEM 4 OHMS

    GOOD LUCK

    Dec 12, 2008 | Performance Teknique ICBM-5712 Car...

    1 Answer

    I need rms spec's for performance teknique CBM-5712,


    you will get more power at lower ohms, the lower the ohms the less resistance it will have against the amplifier

    heres a small definition if it helps

    The ohm is defined as the electric resistance between two points of a conductor when a constant potential difference of 1 volt, applied to these points, produces in the conductor a current of 1 ampere, the conductor not being the seat of any electromotive force.[

    Dec 12, 2008 | Performance Teknique ICBM-5712 Car...

    Not finding what you are looking for?
    Performance Teknique ICBM-5612 Car Subwoofer Logo

    Related Topics:

    214 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Performance Teknique Car Speakers & Subwoofers Experts

    xxxxxx xxx

    Level 3 Expert

    4706 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Performance Teknique Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...