Question about Canon PIXMA MP470 All-in-One Printer

2 Answers

Bumping noise from print cradle then error code

Posted by on

  • gmann422 Apr 22, 2010

    i cant get to the cartridges

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 776 Answers

What is the error code you receive.
To know how to get to the cartridge, please go the below mentioned link;
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=116&modelid=15403
Go to tab "Support and service"
and type in "Check cartridge"
Then look in answer 3 "How do I install the ink cartridge(s)? " which tell you how to remove/install the cartridge.

Posted on Apr 22, 2010

  • Dushyant Bist
    Dushyant Bist Apr 22, 2010

    Please provide details of the error code or accept the solution if it has helped.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,619 Answers

Hi


Thanks for using FixYa. Start with cleaning the print head. To clean the print head take a hot water towel with the printer unplugged and the cartridges out, clean it till the time you see there is no ink residue on the towel. If still the issue is not resolved then soak the print head in hot water then leave it overnight, then try it again. If still it won’t help then instead of spending $45 for a service repair call you can buy a new printer in same price. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Posted on Apr 22, 2010

  • Rylee Smith
    Rylee Smith Apr 22, 2010

    You'll need to open the front cover to get to the cartridges.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Error B200


Get steps to Fix Canon Printer Error Code B200 instantly. Watch below video to learn how to fix Error Code B200 on PIXMA Printer Call now +44-8000465291 for instant Printer help.
Source: https://goo.gl/xskzcB

For 4+ Cartridge Printers:

Step1:-Remove All Printer Cartridges.
Do remove the individual ink cartridges from your printer. This will be opening the lid of your printer and waiting for the cartridge cradle to be placed in the correct position.
Step2:-Remove the Print-head.
This is can be done by lifting the orange or gray locking lever on the side of the cartridge cradle and then gently lifting the print-head from the printer.
Get full Step by click below link

How to Fix Error Code B200 on Canon PIXMA Printers 44 8000465291

Feb 01, 2016 | Office Equipment & Supplies

1 Answer

Paper cartrige cradle is stuck.


print cartrige cradle is stuck clear jam then press ok in hpphotosmart 7550

Sep 08, 2009 | HP Photosmart 8150 InkJet Printer

1 Answer

Print cradle is stuck


If it is a paper jam, open the printer according to user manual, then try again.

Or detach pring cradle, put back.

May 02, 2009 | Computers & Internet

2 Answers

Even thought there is NO paper jam, I still get an error message:


Please try this solution :

1. Turn the printer off and open the access cover.
2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.)
3. Turn the printer on, load some paper, and press the Form Feed button.
4. Watch the paper as it feeds through and try to determine where the jam is occurring.
5. Check to see if all the rollers are turning.

If all the rollers are turning, there may be something in the feed path that you can't see. Go to step 6.
If not, there is probably a feed motor or a gear problem and the printer may require service.
6. If the paper is jamming under the carrier assembly, you may be able to fix it using the manual feed slot.
7. Turn the printer off.
8. Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers.
9. Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it loose.

Feb 19, 2009 | HP DeskJet F4280 All In One Printer InkJet

1 Answer

Printer cartridge cradle is stuck.


Hi ok sorry to heer but try I found this I know your error not in here but it may work for It worth a try nothing to lose and it may work. I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...

Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Oct 17, 2008 | HP - HP Photosmart 8250 printer

4 Answers

Print cartridge cradle is stuck ican't find where it is jammed


This might help . . . Mine finished printing one doc & then made a terrible noise & sent a message to my screen that "print cartridge cradle is stuck." When i opened door, i could see it was stuck off to the left side so left cartridge was obscured. I could not get it to budge, although i kept turning it off, gently pushing & turning it back on. Finally, i got my hand inside & determined that the little door to the left-side cartridge had popped open & was causing it to remain stuck. After some struggles (turn off printer first!) i was able to maneuver it around & close it tight. Now, all is well . . .

Apr 16, 2008 | HP Office Equipment & Supplies

1 Answer

Mechanism Error - Print Cradle won't move! - HP 5650


This "plastic strip" is called the "carriage encoder strip". This strip dictates the timing of the carriage assembly. If the end slots aren't broken, you can re-attach it. Otherwise, you'll need to replace it. They are about $10.

Jul 03, 2007 | HP DeskJet 5650 InkJet Printer

1 Answer

Symbol barcode scanner, handheld, cordless, yellow


error code communication error the scanner is not communicating with the cradle. It is important that the synapse cable is plugged into the cradle before the cradle power suply is pluged into a outlet. also could be the scanner did not pair up with the cradle correctly try rescanning the barcode on the cradle.

May 29, 2007 | Symbol Batch Barcode Scanner P360/460...

Not finding what you are looking for?
Canon PIXMA MP470 All-in-One Printer Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

old marine
old marine

Level 3 Expert

1978 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...