Question about Whirlpool LER5636P Electric Dryer

1 Answer

Ice Machine The ice machine is no longer making ice. It is "ON" and the water dispenser still works, but there is no ice being made. The freezer is still very cold and it is set to zero degrees. I've cleaned under it, it was somewhat dusty, but nothing major. Any help you can offer will be appreicated. i have ed5jhgxrb00 refrigerator and the ice maker stop working water not getting to ice maker

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 125 Answers

You should get a replacement for the ice maker.

Posted on Mar 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Refrigerator icemaker repair


The ice maker does its own thang. All it needs is power and a good water valve to supply the water. Also you paid the water bill helps too. Anywho when the temp in the ice maker mold drops below 25f the harvest cycle begins. The mold heater is activated and loosens the ice. When the ice starts moving the heater shuts down and the motor carrys over and drops the ice. The ice maker then asked for and gets water from the water valve. So what goes wrong? Watervalve solenoid burnt out, water valve dripping like a faucet make a stalagmite in the fill tube blocking fresh water to ice mold. If that is ok then something inside the icemaker went haywire, replace it. When replacing the ice maker replace the watervalve. Note: if temp inside icebox freezer does not get to 25f any ice maker new or existing ain't gonna make ice. Be sure to clean the coils down by the compressor and the kickplate so the maximum amount of airflow is running down there and make sure the cardboard panel back there is in place.

Sep 26, 2013 | Dryers

1 Answer

How to diagnose ice maker does not produce ice


The first thing to check is to make sure that the temperature in the freezer is below 10 degrees F. If not the ice maker will not work because the sensor in it won't allow it to call for water. If the temperature is good, check to see if there is ice in the ice maker.If there is and its not dropping ice then more than likely the mold heater which allows the ice to break free and thus be ejected has gone bad and you need to replace the ice maker. If no ice is there check the fill tube to make sure there is no obstruction, and if not turn the ice maker off, wait a minute, then turn it back on, When you do that a small amount of water should initially come in. If it doesn't then the water valve itself has failed. Also a note, check the water filter to make sure its not old, this too will also cause water not to come into the machine but you'll notice this also in the water dispenser area as well.

Sep 05, 2012 | GE Profile PDS22SFS 22.2 cu. ft....

1 Answer

Freezer won't freez and the bottom nearly cools


I think you need to repost or clarify. You are asking why the freezer on your maytag gas dryer wont freeze. Assuming you have a split frig/freezer.... and assuming the compressor is working.... most common problem is either the fan motor is bad or possibly seized up with ice. Also the coils may be completely iced over. You can take two approaches here... Either turn the unit off and let it completely defrost, and let all the ice melt. Also best to tilt it to drain pooled up water after it melts. Or... you can remove some panels (sometimes difficult to do), and access the fan blower and coils. Once you get to the fan blower and coils check and make sure fan is blowing. let all the ice melt. A blow dryer works good for this, or just let it sit, and again make sure you tilt it and drain any pooling water. Also you should clean all the dirt, fuzz, and scum from under the unit around all the coils, and fans behind and below the unit.

Sep 18, 2010 | Maytag Neptune MDG5500AW Gas Dryer

1 Answer

COMBINATION OF PROBLEMS WITH MODEL 25 HOT POINT SIDE BY SIDE. UNPLUGGED IN FREEZER FAN SO REFRIDEGERATION UNIT WORKS AND TOOK OUT ICE/WATER CHUTE LIGHT SO WATER INDOOR DISPENSER WORKS. LOOKED AT CIRCUIT...


i think you answered your problem / sounds like the board. some times you can smell the burn and some boards have clicking sound . / from what you have stated . i would replace board. mm the burn is the price of the board .. mm

Dec 03, 2009 | Dryers

1 Answer

Not getting water to icemaker but have water in door dispenser


no water to ice mker / look at the water valve in the back it is a two sol. valve one side for water and other for ice .. also the tube in back of freezer that fill the ice mker may be frozen .. ( hot water up the tube will open it .. mm

Nov 30, 2009 | Dryers

1 Answer

Kenmore ice dispenser not working on side by side 2000 model


If you take the ice bin out and gain access to the motor by removing the cover over the motor area you can check for voltage to the motor when you try the dispenser switch. If it's not getting voltage the switch is bad. If it gets voltage but don't turn or if it bogs down easily the the motor is bad.

Sep 22, 2009 | Kenmore Elite HE3 Steam 8674 Dryer

2 Answers

GE Monogram refrigerator is leaking water on the floor


At some point the freezer got too cold and the drain froze (it is a poor design with a loop in the bottom). Once this freezes it will not thaw for a long time.

Here is what I did:
  • Remove all items from freezer and let it completely thaw
  • Pull unit away from wall to access rear
  • Cut loop off drain line where it hangs in drain pan
  • Place a bare copper wire (#12 will work) through the drain line and wrap it loosely around the heating coil above drain pan
  • Enjoy

Did this 6 months ago and have not had problem since

Mar 15, 2009 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Ice maker not working properly


Make sure the fill tube going directly into the icemaker is not touching the part that receives the water, if it is touching the water will spray all over and not go into the cavity

Jan 11, 2009 | Kenmore Elite HE4 Electric Dryer

1 Answer

Frigidare ice maker making slabs of ice, not cubes


Today, I removed ice maker and auger motor. Found out this morning that water was running down the back of frig. inside, everything in freezer was frozen together. Found this out after removing all food from freezer. When i looked into the ice maker where water enters, that was frozen solid. After thawing and checking everthing. I put it back together in freezer. It is nine oclock now, and I do have cubes. I really can't tell you what I did, except thaw it all out. It's been running for four hours now and it seems to be all right.

Nov 16, 2008 | Frigidaire Dryers

Not finding what you are looking for?
Whirlpool LER5636P Electric Dryer Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...