I just inherited this tv and i turn it on and the pic comes on for a random amount of time the first time it stayed on for 3 hours the next 3 mins the sound stays on but the pic goes away this is a vs-5043 mitsubishi any advice would be great thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
probably not worth it. How many times does the LED flash? That will indicate your failure cause. Problem is this is an old tv and parts are not available or cost effective. Unless its bad capacitors or bad solder you could be looking at rediculous amounts to fix it. Mitsubishi WS 65413 Manuals Support and Troubleshooting TVs
here is a link to the manual. please provide the amount of LED blinks. itll blink a few times and pause.
You could literally have anything wrong with your unit. RCA standard procedure is to try to start 3 times when there is a fault then lock the unit out. I have a tip at http://www.fixya.com/support/r6396176-projection_tv_troubleshooting which will walk you through the troubleshooting process as well as tell you where to get any parts you may need.
Had the same issue sound but no picture, try wiggling the connections to the back of the tv, if that does not work try using a different hook-up, I ended going from the component jacks to the DVI hook-up and this took care of the problem, hope this helps!!
I have the same issue, we've had to change our bulb three times in less than two years. now we have 61" expensive paper weight. Our current bulb is less than 6 months old. The TV is only 2 years old and like i said this is our third bulb.
the blue light blinks 4 times. you get sound. then a few minutes the the picture returns... then it goes out, and the cycle goes on.
on your deflection board ck capacitors cp150 cp114 cp120 if cp 150 is puffed up on top it is Bad 2200uf16v other 2 caps are 220uf 35v replace all 3 .Heres another thing you can try on front panel Press and hold vol-and ch- with TV off, hold both at same time wait for 10secs untill TV comes back on.