Question about Projection Televisions

3 Answers

Dead tv :-(

I have a lexsor tv, i have has it 8 months with no trouble and one day last week i came in from work and it wont turn on. when on standby the little red light is on but when i try to turn it on the little red light stays on and also seems to have a flashing green light but no picture and no sound the tv doesnt even seem to power up

Posted by on

  • nina_lazzari Sep 01, 2008

    green power light is on, but no power to the screen. no picture, sound, nothing.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Replace all caps in the psu.

Posted on Mar 19, 2009


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have took the power supply out and had a look i am unsure but i think the fault cud be a capictor with values 450v 4.7 uf as it is slightly domed

Posted on Apr 15, 2008

Ai have the same fault on my tv will not swith on any help any1

Posted on Apr 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi! My toshiba 2100td tv is over 10 years old and last few years it's having weird problems. When it's turned completely off (not in standby) and when I turn it on, the screen blinks for a 10-


The real problem here is its age, a lot of these sets of that age critically needed parts are just no longer available.

I repair them but the real risk is someone fixed it, a few months later it develops another problem etc etc etc.

Ten years is now a days a long life for a TV.

Apr 16, 2012 | Projection Televisions

1 Answer

Samsung HC-P4752W Does Not Turn ON


The proble you have is an intermittant power supply or sweep power supply. Unless you can find a bad connection on the power and deflection board, this could be a very difficult problem to find. I have ran across this problem a couple of times, and after spending countless hours troubleshooting, I replaced the main board and all the problems were taken care of. The board part number is at samsungparts.com and I found the board for you. it is located here: http://www.samsungparts.com/part_detail.asp?catalog%5Fname=Parts+and+Accessories&product%5Fid=BP94%2D01266A&search%5Fmodel=HCP4752W Good Luck

Jul 04, 2007 | Samsung HC-P4752W 47" Rear Projection...

1 Answer

Toshiba 61 rear projection, im not sure what wrong with it. One day it decided it wont transmit any pictures. The standby light is on but no picture. At first i thought i may be the remote not working, ive...


When was this tv has it projection lamp last replaced?If 1 1/2 or 2 years.Tv on an used like 4 or 5 hours a day.The projection lamp life is over.Require change another projection lamp.U hear alot of clickings too?That mean the board call the Ballast board it also dead,and require changing too.This Ballast board,help to ignite the projection lamp.

Aug 14, 2010 | Toshiba 61H71 61" Rear Projection...

2 Answers

I have a Sony KP-65WS500 from 10/2002. There are thin red arcing lines across the screen when the scene is dark or black.


This tv have a problems known as a convergence problems,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved the convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 16, 2010 | Sony KP-65WS500 65" Rear Projection...

2 Answers

Samsung hlr5067w shuts of after 30 seconds... flashes red


I would suspect the lamp first as they can cause intermittent shut down issues.

Nov 03, 2009 | Samsung HLR5064W DLP Projection TV

1 Answer

I cannot turn on my recorder .


what make and model do you have ?was the mains power interupted?

Apr 27, 2009 | Projection Televisions

1 Answer

I have A Pioneer SDT50W1 rear projection TV which is about 11 years old. It is in A1 condition but recently I have had a problem when turning on the set. When I press the on off switch on the front of the...


The most likey cause of this is poor solder connections either in the power suply area or the convergence circuit area. If you can solder and are comfortable working inside the set where there are potetially dangerous high voltages (even when unplugged), you maight be able to resolve this yourself. Try resoldering any connections on the boards that appear grainy or have rings. Update this with your results.

Thanks,
Dan

Feb 18, 2009 | Pioneer Projection Televisions

1 Answer

My sony sxrd projection tv wont turn on


From what I've been able to find, the problem is the fan that cools the bulb is not starting when you turn the tv on. Blow on it to get it going or clean with compressed air. The fan could be clogged up with lint etc. It's on the rear left of the tv.

Jan 05, 2009 | Projection Televisions

1 Answer

Lexsor lcd tv wont switch on from standby


check the bank of capacitors in the power supply.They can be seen in a row on the edge of the power supply pcb. If anyof these have bulging tops or mis shaped bottoms, replace them.

Apr 27, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...