Question about Toshiba Satellite A105 Notebook

4 Answers

Toshiba a105-s4054 won't boot

Please help. when i turn on , i get 4 error messages : resource conflicts
pci serial bus controller on motherboard bus:07,device:06,function:01 pci mass storage controller on motherboard bus:07, device:06,function:02 pci on motherboard bus:07,device:06,function:03 pci network controller on motherboard bus:07,device:08,function:00 i can press f1 to load defaults or f2 to setup but keeps returning to error messages and won't boot. a friend recently uploaded bios version 6.00 when i first started having this problem and worked fine for a day but now all seems lost   

Posted by on

  • grinaldi Mar 25, 2008

    shorlty after posting above, i was able to start in safe mode . i rebooted then did system recovery from original cd and computer worked great for a day. while using it was prompting for a restart to do updates and while restarting came back with dreaded error messages: no tpm or tpm has problem, resource conflict-pci network contoller on motherboard bus:07,device:08,function:00 

    i have been trying to start again in safe mode, taking out battery,switching memory to different port. nothing
      how would i flash back or reset to prior  bios ? 

  • ncduvall Sep 08, 2008

    I have a Resource Conflict - PCI on Motherboard Bus:08, Device:06, Function: 03 on my Toshiba A105, S4334. My DVD is a MatshitaDVD-RAM UJ 841S. I believe the problem could related to the CD/DVD possibly failing as I've read on some other sites this has been an issue. I haven't installed new software, but I did do a system recovery (while my system was still running WindowsXP but my MS Office wasn't). The recovery fixed that MS Office issue and things were fine for a few weeks. Then I had a boot problem. Went to Setup and restored to defaults. It booted up fine a few times then went back to this device error and won't repair.



4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 180 Answers

The same machine with me and the same problem I changed the BIOS of the motherboard but the problem Tlch the same message is is the last day I discovered that the problem in the chip of Intel's motherboard happens is a conflict between the PCI and Ridr and some of the various components that vary according to the case of the slide as this occurs in the organs contained in the slide as happens conflicts in the delivery at the beginning of operation of laptop and since all the inconsistencies that occur when you start up that is stored on the memory the BIOS and therefore must be emptied this memory so that the laptop from work and not doing a re- choose to run the key F-1
s this memory chip in it's protection for the BIOS that is stored by BIOS password
Points for this memory on the motherboard when you connect to these points is clear all data from storage on a slide in the Model 100 is a satellite point of discharge under the Wireless card under the keyboard and be written next to 88 **
As for in this model are under-Ram

Posted on Apr 20, 2010



Posted on Aug 16, 2008


I Am Not Sure Exactly What Keys That Model Uses For That Feature. But if You Have A Floppy Connected Get The Bios Bin File Over To The Floppy And Press F2 When Booting. If The Keys Are The same On Most Models It Should Ask you If You Want To Flash The bios. That Feature Is Usally Built in to The Bios itself. Like A Back Door.I Have had Very Many Problems When Updateing Bios With Windows XP Alot of time It Crashes The machine Imediately. You may Have To Revert To The Bios That Was On The machine When It Worked Right Last. It maybe The Only Bios That Will work Now. It You Had Flashed The Bios before Loading The operating System. The New Install Woulkd Most Likely Correct That problem. Do You Have Any PCMCIA Cards In The Laptop When Tring To Boot If So Remove All Components That Are Hooked Up If Any. Also Maybe One Of Your Updates Are Causing A Conflict Maybe new Audio Or Network Driver That Is Not Compatible With Your system. I Just Updated My Vista System laptop And my Sound Stop Working And Had A Problem After An Update I Had To mannually Revert Back To The Old Audio Driver. The new File Caused A Problem With The Audio. Revert Back To The Factory Restore CD And Try Again. This Time Chech The updates before You Let Them Install. And After Each Reboot Set A Restore Point. So You have A Point to Go Back To If The problem Happenes After An Update. Check Update History to see What Updates You Downloaded. Hope This Helps.

Posted on Mar 25, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

It Sounds Like Your Bios needs Reseting First And see You maybe be having A Tempterature Shutdown. I Just Worked On A Toshiba It Had 2 Different fans 1 For Cpu 1 For NVidia VGA Chip. System Was have major problems Until I Replaced Both fans And They Are Not The same Size They Look The same But One Is Smaller. They Are Hard To Find. Yo ca Always Flash It back To The Prior Bios. Maybe new Bios Won't Operates Properly beacuse Other hardward Changes may Have been Made To The Mother Board ThatYour Board Does Not have. Flash back 1 version First see If That Works. Make shure You have Bios Set For Plug and Play operation. Hope This helps

Posted on Mar 23, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Resource Conflicts errors for PCI in Slot 01

hey carl - first thing - laptop or desk top - if desk top (tower) remove all slotted cards and boot system - when it boots completely to home screen. shut down and insert 1 card at a time until you recieve you nasty screen. or boot into safe mode f10 or12 get in and disable all your cards -windows system- control panel - then turn on one by one doing a reboot - when you do find the conflicting card you should be able to figure which card or cards they conflict to - you will have to change the resource allocations on probable 2 or 3 cards to allow all to work - there all lots of sites that will explain this better - hope this helped

Mar 20, 2014 | Sony VAIO Computers & Internet

1 Answer

Toshiba Satelite M35X-S111 Beep codes on boot

You need to go into the BIOS (setup) and reset to factory defaults first. This should clear up the issue.

May 28, 2012 | Toshiba Satellite M35X-S161 Notebook

1 Answer

I BOUGHT A USED ASPIRE 3100-5100 MOTHERBOARD AND GET THIS ERROR WHEN IT TRIES TO BOOT. ERROR Resource Conflict ? PCI in slot 03 Bus:06, Deice:01, Function:00 ERROR Resource Conflict ? PCI in slot 03...

You should try clearing the cmos battery. It's a small battery on the motherboard that can be taken off. Take it off for 20 minutes and put it back in. Then boot up again.

May 03, 2010 | Computers & Internet

3 Answers

My laptop wil not boot. Not even in safemode . It has wndows xp that i had recently put on there.. its been doing this for a min but it would come on after a few tries.. This is exactly what happens when i...

Hello Karen
Try removing and resetting your memory modules.
Blow some air in the slots to remove any dirt trapped in there.
They are locate don the back of your laptop.
The instructions are in the manual under how to change or upgrade memory modules.

Please don;t forget to rate this answer if it helps

Jul 22, 2009 | Acer Aspire 5100 Notebook

1 Answer

Resource conflict

replace 4 with a similar drive as to whats in 3, your prolly confusing the controller.


Oct 24, 2008 | Toshiba Satellite A105 Notebook

3 Answers

Resource Conflict - PCI on Motherboard Bus:0A, Device:09, Function:00 = CARDREADER PROBLEM

I did try all that, and it didnt work, on a 5050 acer built on a 3100 gabinet.

I think that the problem is that the cardreader chip is not well glued to the motherboard, that's why it gives you that error. If you try pressing certain points of the computer while booting, it miraculously stops giving that conflict error.

We should be payed back by Acer, as this is an project issue =P

Jul 19, 2008 | Toshiba Satellite A105 Notebook

1 Answer

Re: Hi :) plese help

try to refer this problem to your manufacturer/ store owner of your laptop because most probably its either your memory(RAM) or your video card needs to be may have loose their connections.

because in the desktop PC's, these are the common problems especially upon booting up your computer.

Jan 16, 2008 | HP OmniBook XE3 Notebook

1 Answer

Hi :) plese help

remove all external devices and try again does it beep at all?

Jan 03, 2008 | HP OmniBook XE3 Notebook

Not finding what you are looking for?
Toshiba Satellite A105 Notebook Logo

2,498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

pankaj rautela
pankaj rautela

Level 3 Expert

1252 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides