Question about Projection Televisions

2 Answers

Code for Vizio HDTV to Bose System

I have a Bose CineMate Surround sound system and can't find the remote code for my Vizio TV HD 42 inch.
I have all the codes for the DVD and VCR and Cable Box but not for the TV. HELP!!!! Boo

Posted by on

  • Larry Riling Nov 03, 2012

    I have a Vizio TV HD 47 inch - Both 10030 or 10178 worked for me also. Thanks.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Try 0030 or 0178

Posted on Apr 06, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Cine Mate codes are 5 numbers so you need to add a 1 in front of each of these. Both of these codes worked for my TV

Posted on Nov 27, 2009

  • eugene2330 Feb 09, 2011

    Thanks to ies236 mine works.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have picture but no sound. We just had our surround sound system go out and are trying to run our tv on it's own internal speaker system. How do you hook it to our direct tv hd box


Hi.

You need to use audio cables. Connect two red and white audio cables from the output on the HD box to the relative input at the back of TV (nr.4 in picture below). The best way to connect the HD box is by using component cables, that are the red-green and blue trio of cables, plus a white and red audio cables.

Here what you need:

Three plus two:
Component Video Cable
Audio Red / White Cable

or single set of five:
Cables Unlimited - Video / audio cable

Once you have the five cables, connect them to the output at the back of the Direct TV box, and then connect the other end of the cable to either group of connectors 6, or to one of the columns in connector 7. Do connection with box and TV power off. After re-applying power use the source-input selector on remote to select the source from Direct TV box.

ginko_162.gif

May 24, 2011 | Samsung HCM4215W 42" Rear Projection...

2 Answers

I have audio cables going from HD 61g887 jvc tv, to my phillips surround sound system under aux but it is not giving me sound?


hi
you didn't mentioned the model number of your surround sound system, for a better solution its important. any why try the following.

if you are connected the analog audio output of your tv to the system using RCA cable, then go to the setup of the surround sound system and change the input assignment setting from digital to analog.
If your connected the digital output of your tv to the digital input of your surround system using optical cable then, goto the setup of your surround system and change the input assignment to digital (optical) input.


if u need any further assistance fell free to contact through fixya

Jan 20, 2011 | JVC HD-61G787 61" Television

1 Answer

Sound is chopy


What is the source of the choppy sound? Cable box? When you say it fades do you mean it gets quieter or does it just blink off? Digital signal problems will cause the latter. You might check the cable box or call your cable provider about it.


Apr 03, 2010 | Mitsubishi WD-65731 65" HDTV

1 Answer

I have a Bose Lifestyle V30 surround sound system and the Bose remote does not function with any of the listed remote codes for the Panasonic. I have a Panasonic TC-P58V10.


You need to use the IR emitter that came with the Bose V30 system. Bose employs a proprietary RF frequency remote which communicates to the hidden central control head. You plug in the emitter to the processor unit and run the emitters to the IR 'eye's' of the equipment you want to control. Once all this is done then and only then can you go through the remote codes to control a particular device. The Bose V30 has 2 IR emitters that come with the unit to control 2 devices. You can expand on that buy buying a IR emitter bridge that has several inputs for other devices.

Now when it comes to a DVR I am not so sure the Bose universal remote will work all the playback and FF and record control buttons and a DVD or VCR. I hear there is a new BOSE remote on the market that can do that but I have yet to see it in person or ask a sales rep about it. Sometimes they are non-tech's so its no help : (

Feb 10, 2010 | Panasonic Projection Televisions

1 Answer

Hook up sony blu ray


You should be able to hook it up with a component video cable. A component video cable is a cable that has 5 color coded RCA style ends that are Green/Blue/Red/White/Red. The Green, Blue and one of the Reds is for the video and delivers the signals needed to produce the HD picture and the White and the other Red is for the audio to provide you with stereo sound.

The Video cords will plug into the section labeled component video facing up and down and the audio will plug into the side by side section. So if you plug into Component input 2 then you would plug in the audio into the audio section of input 2.

If you have a separate surround sound system you can connect one of two ways.
1. Plug a separate Audio (red/white) cable from the Blu Ray to an available input on the surround sound.

or

2. Plug all inputs into the TV (as noted above) and then plug a separate Audio (red/white) cable from the tv labeled "Audio Out" to an available input on the surround sound system.

Jan 03, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer

No audio!?!


In the Menu under Audio, make sure that the SAP is OFF !

Jul 24, 2009 | Toshiba 51H83 51" Rear Projection...

1 Answer

The sound does not work on my 50H81 Toshiba rear projection HDTV, when it's in the HD mode. It was working prior to being moved & was hooked up through a Bose surround system. The sound on the TV works...


Check to see if the comp inputs have a red and black audio input. Those must be connected, second go inside the menu and make sure the inputs match..good luck..

Mar 09, 2009 | Toshiba 50H81 50" Rear Projection...

1 Answer

NO SOUND FOR TV BUT I HAVE SOUND ON DVD


the bose has to be hooked up to the cable box output and video 1 on the bose. This is the only way it will work

Nov 14, 2008 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

I purchased the hdtv model DP32648 at walmart, I hooked it up, it is on and working , But some stupid guy told me I needed a cable called HDMI, OK So I have it But I have Dish Network, their is no place to...


ya dish network reg box isnt hd ok u need call dish get hdtv box then u can use hdmi cable to get hi end picture ok for now use cox cable like u do to u can upgrade dish hd sumday k

Oct 15, 2008 | Projection Televisions

1 Answer

Surround Sound Installation


The Hitachi 50UX57B is a 50 inch standard projection TV with a standard screen. It is not HD ready. If you need it, I think I can download the owner's manual (in PDF format) from Hitachi and foward it to you.

Aug 03, 2007 | Hitachi 50UX57B 50" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

2,552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...