Question about Xact Communication XG2200 Cordless Phone

4 Answers

BT Studio 1000 4 handsets

Main handset with answerphone ok 3 remote even with battery change seem on constant recharge no dial tone or display cant find user manual any suggestions to go through to get other 3 handsets working?
Is there a key combination on main phone to activate the other 3?? Thanks

Posted by on

  • 1 more comment 
  • Anonymous May 02, 2008

    i have the bt studio hands free twin phones, and i have charged both the phones and can't get a dialing tone, I have taken the batterys out, pressed buttons, and i can not find the instruction manual anywhere could you let me know if there is a code to unlock it or just simply to make it work



    Thankyou



    Mrs Sue Groom

  • alanjas Feb 11, 2009

    On One of my handsets all i am getting is like a slow engaged tone

  • Anonymous Mar 29, 2014

    I have purchased BT Studio Plus 500 dual phones with answeing machine. The handset ringer volume on/off button has stopped working..phone still rings even when symbol indicates it should not! Can you advise this elderly dumbo please?

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi problem with bt studio 1000 phone changed battery and phone still not working just a hi pitch sound when you press it .
please can you help me.

Posted on Oct 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To Mrs Sue Groom,
You probably need to register the handsets to the base.This is the user manual for the BT Studio 1500
http://www.shop.bt.com/content/uni2/documentation/43py/023626.pdf

Posted on May 24, 2008

Green light flashing all the time-also red light doesnt flash to tell me I have a message

Posted on Oct 02, 2008

Hi there ive own the bt studio 1000 with two hand sets, my handset registered no2 keeps losing its distance range. i can not go any furter than 3meters away from the base. can you help pls

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Dial Tone from BT Diverse 7110 Single


Check that the volume on the handset is turned up, also replace the batteries or put in non-rechargeable ones to get the phone working at full capacity. If bought from Amazon you should be guaranteed for a year, not a month!

Mar 03, 2014 | BT Diverse 7110 Plus Cordless Phone - DECT...

1 Answer

How do you register a second phone to the bt studio 1000 phone


1. Check the manual of your new handset on how to set it to registration mode.

Then on your BT Studio Base

2. Press and hold the base (page) button for at least 10 seconds until you hear the validation tone. then release. That's it.

for this model, you can only use up to 2 handsets.

hope it helps.

May 05, 2011 | Cell Phones

1 Answer

No dial tone in Clarity C4230 setup


if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Apr 16, 2009 | Clarity C4230 Cordless Phone

2 Answers

Cant get one of the phone to get dial tone says unavalibel


All you have to do is put the phone that does not get a dial tone on the MAIN CHARGING BASE for 20 seconds! it will then sync up!

Good luck!

Jul 17, 2008 | GE 25931 Trio Cordless Phone

3 Answers

BT Studio 3100 handset 1. Display flashing base 1, cannot go to setup menu, not changed pin code, turned off and on, removed batteries, turned off base unit, waited 20-30secs for all of above and still...


Help
My Bt Studio 3100 cordless telephone ( 2 Pack ). I have carried out the setting up procedures as per instructions.
Handset batteries are fully charged, but I am not getting the dialling tone.

Jul 11, 2008 | Lands Phones

1 Answer

Extra handsets no longer seem to work. No ring and no line


Please be sure to put the extra handsets in the MAIN base station to register. They will not register in the small remote charger stations.

Let me know if that fixes the problem!

Brian

Jun 15, 2008 | GE 25942GE2 Cordless Phone System

1 Answer

No Dial Tone


I have found this free link on BT site for you
http://www.shop.bt.com/content/uni2/documentation/498n/025455.pdf

If the second handset works ok on the base and the first handset doesn't, then you are right...the fault lies with the first handset. There are batteries ( special type ) in the handset, it sound as if either the batteries are dead, or not charged ( try charging them for 12 hours on the good base station ) or the connection is bad.

May 08, 2007 | British Telecom Synergy 2110 Cordless...

1 Answer

Signal indicator flashes constantly


The following worked when I had what appears to be the same problem. Solution :- Remove batteries, remove power connection, wait 30 minutes, re-connect power and replace batteries then press button on base until it beeps. Both handsets started continuous beeping which eventually stopped and everything was returned to normal. Admittdly this sounds almost identical to the process used by 'versailles' above, but at least it confirms that the technical info given by the BT Helpline does work

Nov 28, 2006 | British Telecom Freestyle 2200 Trio...

4 Answers

BT Freestyle 2200 I am having problems obtaining a dialing tone on both of my handsets. When I press the green button for a line out it just beeps 3 times and cuts off. There is charge in both the...


hi just want to help others as desciption aint complete above

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are registering the new handset.
2. Press and hold the PAGE button on the base for about 10 seconds until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold redial & CALLSd buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the base number is 1, the display shows 65-1 then PIN. which is normally 0000
5. Enter and registration starts. When the handset beeps and returns to standby registration is complete.

Nov 08, 2006 | British Telecom Freestyle 2200 Trio...

Not finding what you are looking for?
Xact Communication XG2200 Cordless Phone Logo

3,765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xact Communication Lands Phones Experts

kakima

Level 3 Expert

102366 Answers

Cindy Wells

Level 3 Expert

4949 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Xact Communication Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...