My Kenmore Elite flashes an f then it beeps and goes to dl and it keeps flashing dl. This code is not in the book.

DL is a door lock code. Did the door feel firm when closed?

Search Results

Why am I getting an FL error code on a Kenmore Calypso ...

www.shopyourway.com > Manage My Life > Questions
I have a Kenmore Calypso washer model 11022062100 and there is water in ... Why am I getting an FL error code on a Kenmore Calypso washing Machine?
fl error code on calypso washer-need help!! - Home Forumsths.gardenweb.com > Home Forums > Laundry RoomJul 22, 2006 - An FL error code keeps flashing on my Calypso Washing Machine. I can't do laundry. Could someone please tell me what I need to do to ..."F dl" light come on - Kenmore Elite HE3 Washing Machinehttps://www.ifixit.com/.../Why+is+the+%22F+dl%22+light+come+o...iFixitThese are the errors for error code F/dL Door Lock Error Condition A Door Lock Error... The Kenmore Elite HE3 is a washing machine by Kenmore. ... On Amazon I was able to get the CCU (Kenmore CCU Central Control Unit .... and a dose of WD40 on those contacts should keep that from misbehaving in the future as well.Kenmore Elite Calypso FL error code - ApplianceBlog

Please check this link for tips to open the door: Door locked

Try this site:

http://adsisecurity.com/KenmoreWasher.htm

Error code DL means door lock failure. Best off to call a certified repair company such as Sears.

dl stands for door lock

kenore elite oasis dryer won't start, when start button is held down it flashes F, book says call service center

Code F2 means a stuck button. I removed the interface and lightly sprayed each with contact cleaner. So far this is working. The interface costs about $160 and contact cleaner, $10. Good luck.

to andreya ,,, the code dl means door latch ,,,, you door latch is bad on your machine

to afinebalance ,,,, the f1 code is the control board and it too is going out and it isnt cheap ,,,,

if ya'll want to send me your complete model and serial numbers i will check on the parts for both or you.
Larry

unplug machine for 2 minutes this will reset the computer if problem continues look behind bottom front cover and there is a tech sheet that will tell you what the f code is the DL code is bad door lock assembly. it could be the main control (mother board throwing you these codes) Ive seen this happen before