When I miss a call, I go to the callers button and the missed call comes up in the screen. When I hit Line 1 or 2 to return the call the phone puts a number 1 in front of the number and it does not work because it is not long distance. How can I stop it from putting the number 1 in front of the phone number I want to call back??
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 50 answers of more than 400 characters.
An expert whose answer got voted for 20 times.
Re: Siemens 2520 gigaset base
Its an easy fix, you need to tell the phone what area code your in. Push menu, go to system settings, enter your pin, scroll forward to "area codes" press enter twice, enter your area code and push enter to save. Now the phone knows where your located and wont add the 1 and the area code. CG
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Does it say any of these on the display Extern. call -means not arranged with service provider. Contact your service provider. Withheld- Caller is withholding caller ID information. Unavailable -your phone is not setup to display caller is with your provider.Contact them.
In addition your phone provider must support CLIP,CLI and CNIP. Confirm with your provider.
PIN restore Gigaset 4010/4015 base If the PIN code forgotten your Siemens Gigaset 4010 / 4015 base (Classic / Comfort / Micro) then follow these steps to create the reset:
* Take the power cord out * Press the button and on the bottom of the base and hold * Insert the adapter into the outlet, hold the base button * Wait 30 seconds, keep the button pressed * Wait 10 more seconds and remove the adpter from the outlet * Put the adapter back in
Yes we have new ones we sell to the do it yourselfers or you can send it in for repair and we do some updating and put in a new display. You can find us by googling Siemens cordless telephone repair and look at the non-sponsored links.
You will need to customize your Call log settings to show which area code your located in so it will redial from the log properly. To do so, push Menu, then scroll to system settings, push select, then scroll to Area Codes, push select and specify the area code that you are in. If you need additional assistance, go to the link below which is the full manual on PDF, then go to page 48. Hope that helps. http://www.barclayent.com/manuals/Gigaset%202420%20Plus_guide.pdf
Hi James, Here is a link to the instructions below to download the Siemens Gigaset Manual for free or for Siemens repair services. However, on the 4000 model you can easily set the time by pushing menu, scroll down to base settings push OK, push OK again for clock, then scroll down to TIME, and push OK and make your changes. Also, you can change the date, as you saw in the menu. If your using a 4200 handset, the menu is slightly different, but similar. And if you get caller id, the phone will automatically read the system date and time from the phone company so you never have to set your time again. Here is the link for the manual, you may need to go to a different manual depending on your base station model. Good Luck, CG http://www.barclayent.com/manuals/Gigaset%204000%20Quick%20Start.pdf