- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If they don't have any you might be able to get the codes to use in a universal unit. As Best Buy sells Insignias you might try there for a universal remote and they might even have the codes needed for your Insignia unit.
that battery change would reset the internal security memory...you may find that the previous owner has that security code..call them if you can..otherwise, you will need to speak to cust service for that unit and explain your situation
if u mean the radio code, that is not published on the internet and we have access to the information, the code is unique to each cars serial number and radio serial number, it is security related and is for theft deterrence, so if u could just get it from any web site there would be little security in the use of radio codes. The code came with the car in the owners materials when the car was sold to the original owner, look through the owners packet if u have it for the card with code info on it If u don't have contact the local dealer, he can help.
I can provide unlock codes, im a keenwood authorized dealer, but you have to send the units serial number. Tha serial is in a little label on the unit. The price is 45 $ to my paypal account. 100% guaranteed. Please write to email@example.com
This is the workshop procedure for resetting the code.
KENWOOD SECURITY CODE CLEAR procedure
Your radio will require one of the following procedures.
Type 1 During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears). Then using your remote enter your code.
Type 2 Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
Then using your remote enter your code.
Type 3 Model# DPX-4020 and DPX-4030 Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display. Then using your remote, enter your code.
Enter your number from the remote control unit. Your code number is 5227 (KCAR)
* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
The security is canceled and the set enters the TUNER mode! Please rate me FixYa for this solution. Good Luck :)