Drum would not spin

Hi, it could be your drum bearings are gone the drum would wobble slightly. A way of checking is , machine unplugged put one hand at bottom front and one hand at top front edge and push up and down if it clunks quite badly then your bearings on the drum shaft are needing renewed. You also have a shock absorber for steading the drum this can also fail. The absorber is very hard to compress so if its easy to compress then it needs re-newed.

BALL CHANGE DRUM WASHING MACHINE

sounds like bearing have failed or the stainless steel drum has detached from its carrier open the door and try to move the drum up and down there should be no movement at all if there is machine will need to stripped down

Hi What machine is this? and is there play on the stainless steel inner drum?

the transmition is no good

Sounds like the bearings for the drum have or are on the way out. The belt has probably broke or come off.
Depending on the age, cost of new and personal feelings it can be repaired but normally it isn't cost effective, unless the machine cost £500+ ($800+)

Hi, THe shaving are from th ecoupler. THis connects the transmission to the motor. Does the noise accur in both spin and agitate? The coupler wil need changed.
Please let me know if I can assist you further. Part #285753 $15.95
I have this part on my web site www.whirlpoolpartssurplus.com

Thanks
Vic

Drum bearings may have given up.

replace the front seal,check the drum this may be damaged from the front bearing gone bad.
If you go to www.sears.com you can find the parts you nead.just look it up by model #.
You may just need reference # 14

HI thanks for the question. Frigidaire has a life time warranty. on that part .call them. thanks the appliance doc. please rate my answer. thanks.