Question about Printers & Copiers

Open Question

Canon np-6412 copier

Have replaced drum unit, need reset code to turn off light and resume copier usage

thank you

barney morris

530-370-0217

brdjmorris@comcast.net

Posted by on

  • debbiec874 Nov 12, 2008

    I replaced the toner cartridge now it says CC in the window, it will not turn copy or anything else. HELP!

  • avsound May 22, 2009

    Is this a conspiracy? A web search shows many have the same issue, wishing to continue using what is left on the drum until it is worn out (an environmentally friendly solution) yet the info on how to reset the chip or replace it, seems to be an obscure closely guarded secret. Does anyone have answers or do they get deleted by the Canon "gestopo" ?

×

6 Suggested Answers

  • 62 Answers

SOURCE: Canon copier NP 6216 all lights on!

Sounds like there is a piece of paper stuck in the machine somewhere. Maybe a sensor arm has been pulled out of location. Let me know.

Posted on Jan 22, 2008

Cogz
  • 1326 Answers

SOURCE: canon copier NP 6412

It is a older copier, it could be a fan is not working, is it making noise. It may be failing......

Posted on Jul 23, 2008

checkitright
  • 1346 Answers

SOURCE: Canon Copier NP 1020 - error code E0

pretty much the same, the codes are good for several models not just one.

you need to find the other numbers to know exactly which code it is, press the start or stop key to see it display the other #'s.

fuser is on the left side if you replace the parts might as well replace the claws and oil roller.

"E000" Heater lamp, Thermistor, DC controller "E001" Heater lamp, DC power supply / AC Driver circuit board, Thermistor, DC controller. "E010" Main motor clock sensor, DC controller PCB, Main motor, DC power supply / AC Driver circuit board

Posted on Sep 16, 2008

  • 168 Answers

SOURCE: canon copier np 6412

wow that is hard to do i made the mistake doing that one time promised myself never to do that again took me quite a while to get it back in i dont know of any trick except persisitance just dont let the springs come off

Posted on Dec 19, 2008

Cogz
  • 1326 Answers

SOURCE: My Church purchased a Canon F132500, NP 6412,

What is the problem with replacing the drum unit??? The developing unit has to be disingaged and the drum has a thumb srew & you pull the drum out & put the new one in and you are done... Good Luck

Posted on Apr 21, 2010

  • 1 Answer

SOURCE: problem with my copier Canon np 4050 Error code: 540

my xerox mashine is create problem Eror
E203 ?
pls

Posted on Oct 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Canon pixma pro 9500 mark 11 printer and the ink absorber is Full .. Please please help I need the reset code to reset counter on printer .. I would be so very grateful thanks


Dear
Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on. Make sure the printer is turned off. Press and hold the Resume button (triangle inside a circle). Whilst it is held down, hold down the Power button. The green led light should come on. Keep the Power button held down. Release the Resume button and then press it twice. The light should go amber, then green again. Release the Power button. Press the Resume button four times and then press the Power button straight after to confirm the selected action (Reset Counter Absorber). Turn off the printer and then turn it on again

Thanks.

Feb 07, 2015 | Canon PIXMA Printers & Copiers

1 Answer

How do I change the drum to a Canon NP 7130 Black and White copier?


Could be the drum or the fuser causing your problem. To replace drum you need to open the machine by hitting the gray release latch on eft ide of machine to clamshell it open. Inside you will see th toner cartridge/ dv unit on the far right and immediately to the eft of that is the drum unit. You need to release the dv unit by turning a lever before removing the drum unit. Should probably call a tech to do this for you so you dont scratch or damage the drum. Drum life on that model is about 30,000 prints. Whats the meter reading on that copier?

Jul 25, 2012 | Canon NP 7130 Black and White Copier

1 Answer

Canon NP 2120 copier printing very very lightly?


do you already change your drum?pull out your developing unit and you can see cooper plate inside the machine,possibly its broken or this problem due to yourHV board.You can try change your AE sensor.
Very old model

Nov 03, 2011 | Canon NP 6050 Copier

1 Answer

Np 6412 copy dirty lines length of paper


Sounds as if the drum needs to replaced. How long has it been in the copier? They are supposed to be good for 30,000 copies or one year. It could also be dirty optics ( mirrors and glass ). Drum is easily installed by the customer. Just practice with the old drum - removing and re-installing before using the new drum. Too expensive to damage when installing. **** open the copier, Look under the control panel and you should see two levers. Move the right one to the right - this moves the developer away from the drum. Then move the left one down and this releases the drum for removal. Reverse procedure and power up the copier. It will automatically run and set the new drum settings into the copier.

Dec 08, 2010 | Canon NP 6551 Black and White Copier

1 Answer

My Church purchased a Canon F132500, NP 6412, Number 25676. The copier an analog one, is over 8 years old. I have been trying to replace the drum. Can you help?


What is the problem with replacing the drum unit??? The developing unit has to be disingaged and the drum has a thumb srew & you pull the drum out & put the new one in and you are done... Good Luck

Apr 20, 2010 | Printers & Copiers

2 Answers

How to remove drum scretch from Canon 6045 Copier


you cannot fix a line of a drum. If the drum is causing a line on copies you have to replace it. Any light or fingerprints can cause further problems. Look online or at your local canon dealer for the drum unit.

Oct 12, 2009 | Canon NP 6050 Copier

2 Answers

Canon np 7161 simulation


hi help me with this formula to reset canon 7161 e0003 is *2&8 at a go, then * then A then 412 is this the correct way. ?????

Jan 08, 2009 | Sharp AR-5316 Advanced Digital Imager...

1 Answer

Replace drum cleaning blade


take the toner hopper off take dev unit out lower handle on umber one unit remove screw in drum pin remove primary charge assy remove screw lower right of drum frame remove screw upper left frame un plug connectors unit slides out

Oct 31, 2008 | Canon NP 6545 Copier

1 Answer

Canon copier NP 6412


It is a older copier, it could be a fan is not working, is it making noise. It may be failing......

Jul 13, 2008 | Canon NP 6551 Black and White Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

708 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...