Question about Sunpak Auto 544 Flash

1 Answer

Sunpack 544 flash

Sunpak 544, charges but will not flash

Posted by on

  • Anonymous Mar 14, 2014

    where get battery pack for sunpack 3600 and cost please

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

There can be more than one reasons for that.
1. Broken wire at sync terminal.
2. Electronic sync issue:
2.1. Faulty sync thyristor (CR02).
2.2. Faulty trigger transformer
2.3. Any other passive component around the previous two.
3. Broken sync lead to the flash tube.
4. Broken leads to the main terminals of the flash tube.
5. Electronic fault at main thyristor.
5.1.Faulty main thyristor.
6. Faulty flash tube.
7. Other, like crack on the PCB.
Good luck! :)
If you happen to decide to part with your faulty flash, please consider to write me first, I offer it a good home... best regards, Laszlo klaci(at)index(dot)hu

Posted on Nov 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Sunpack 544, but am missing the flash synchro cord 5' catalog #651-782, Where can I get one?


Paramount manufactures every kind of sync cords for virtually any camera and flash: paramountcords.com

Mar 15, 2014 | Sunpak Auto 544 Flash

2 Answers

Will a sunpak 544 aoto flash work with a nikon D3000? dont see a way to connect the two


The 544 connects to a camera via the PC cord (in this case "PC" has nothing to do with personal computers). The D3000 doesn't have a PC port, so you have to use something like the AS-15. The AS-15 mounts onto the hot shoe on top of the camera and provides a PC port.

Mar 08, 2013 | Sunpak Auto 544 Flash

1 Answer

Sunpack Compatibilty


ifyour nikon has a hotshoe it should work quite well. I use sunpak flash on both canon and olympus without any problems. Just connect to hotshoe and shoot.

Please rate my help++++Thanks for using FIXYA

Jun 03, 2010 | Sunpak 383 Super Flash

1 Answer

How can i hook my sunpak 544 to my rebel xti without a slave unit reacting from my internal flash?i see no sync plugs to use on the unit. do they make an adapter or something?


All photo shops hold "hotshoe to PC" adapters for a few bucks. This solves your problem, supposed you have the hosehold-to-PC cable that comes with the 544 as accessory. If not, such cable can be obtained at better photo shops or from www.paramountcords.com. You must know that the flash can be used together with your camera only in Aperture Priority or Manual mode (flash set to auto), or as a fill flash (flash set to Power Ratio mode). The 544 has safe sync voltage.

Oct 12, 2009 | Sunpak Auto 544 Flash

1 Answer

Flash compatibility


According to what I read the sunpak dx-8r is, with the right module, compatable with digital SLRs. Check with B&H photo to get the right module.

Apr 21, 2009 | Sunpak DX-8R TTL Ring Light Flash

1 Answer

Canon I use the Canon XTi and sunpak 544


The Rebel XTi has a sophisticated communication protocol between the camera and a dedicated flash. Only ETTL-II capable flashes can benefit from all the features the engineers at Canon thougt out. This means that with the otherwise superb Sunpak you won't be able to emit autofocus assist pulses, red-eye reduction pulses, the camera won't increase or reduce the flash intensity for bracketing, zoom lens settings won't be reflecting on the flash illumination angle, and so on. But! Set your Canon to full manual (125th sec), set Sunpak to auto, take one of the working apertures according to your taste (depth of field, etc.) and set the same aperture on the camera, and shoot. You still can use bounce flash. I am not sure about second curtain flash, I suspect it won't be possible. Both tele kit and milky filter in front of the flash head are of great help, you don't need to worry about the differences these make in flash intensity. Always keep in mind that the flash makes good exposure according to the given working aperture and, as long as you set the same aperture on the camera, the subject will be correctly illuminated. (I have a Sunpak 522 and a 455 and employ them this way, with success, on my XSi.) Of course you can set set the flash in full manual (M/PR/MD), using the left side, set knob and calculator dial, and this is the only way if you want to make series of shots, because the flash can only make bursts if the power is reduced to at least 1/16th. Good light, Laszlo

Dec 06, 2008 | Sunpak Auto 544 Flash

3 Answers

Sunpak 522 and 544 always firing full power


Try cleaning that front flash sensor.

Alexander
atdlee@netzero.com

Dec 13, 2007 | Sunpak Auto 544 Flash

1 Answer

Sunpack DX-8R


You will need the proper module. Check with B&H photo for the module compatable with your Olympus camera body.

Nov 26, 2007 | Sunpak DX-8R TTL Ring Light Flash

Not finding what you are looking for?
Sunpak Auto 544 Flash Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunpak Camera Flashes Experts

kakima

Level 3 Expert

96571 Answers

Doberman

Level 2 Expert

246 Answers

flashman4

Level 2 Expert

76 Answers

Are you a Sunpak Camera Flash Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...