Question about Microsoft Windows XP Professional

3 Answers

I wan to use windows 98 along with XP

Hi, now im using windows xp in my pc. i wan to use windows 98. can i install 98. if yes how can i install. if not how can i use both OS.

Posted by on

  • kiran reddy Apr 08, 2008

    i set password for BIOS setup n now i forget now. how can i recover tat passward r jow can i change BIOS setup. plz guide me

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

First install c:drive win98
d:drive install xp

Posted on Mar 25, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 24 Answers

Why don't you download a virtual machining client such as vmware player (costly) or Microsoft Virtual PC 2007 (free) or virtualbox (open source)

and install additions so you can do file sharing and all...

SM

Posted on Mar 24, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,027 Answers

This is tricky as win98 is not supported and can not work on faster processors, The book says 2 gig but I had a problem on 1.8 ghz.

the next problem is win98 does not rceognize ntfs file systems. so a bootable partion manager (like linux GParted) would have to be run, to shrink the ntfs partition without altering content to allow another partition to be created then formatted into FAT32 so you could load 98 from a bootable cd.

Posted on Mar 21, 2008

  • Mark Williams
    Mark Williams Apr 09, 2008

    power off, cord removed, open case, remove button cell battery, press power on switch to disipate any voltage, replace battery, power cord and power up, check sum error enter set-up. Set date time etc.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a reliable camera for use with Skype with Mac Pro OSX10.6.6


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Mar 20, 2011 | Logitech Quickcam Chat Webcam

3 Answers

Can I install Windows XP in my laptop which is running Windows 7 Home Premium original


Yes you can, provised you have a Windows XP installation CD and the product installation code.

Jun 05, 2010 | HP Pavilion dv4000 Notebook

2 Answers

Will a CS330 work on a Mac with the right drivers installed?


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud





Jun 03, 2010 | Intel Deluxe PC Camera CS330 Webcam

1 Answer

Plz tell me which intel cam suits 2 mac?


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud




May 30, 2010 | Intel ICP3 Webcam

1 Answer

Can i hook up my quickcam for notebooks to my mac?


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud




Mar 15, 2010 | HP Webcam for Notebooks

1 Answer

No mac driver?


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:

Dec 21, 2009 | Logitech Webcam

1 Answer

I have just bought this webcam for my mac but seems unable to set up


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:

Dec 20, 2009 | Creative Labs Live! Cam Notebook Pro...

1 Answer

Logitech Quickcam install on a Mac OS X or mac laptop


Check here for MAC compatible cameras and under that is info to download your driver.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud




Mar 24, 2009 | Logitech Quickcam Chat Webcam

1 Answer

Installing Buffalo Webcam on Mac


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes

Hope this helps. Bud

Mar 22, 2009 | Computers & Internet

1 Answer

Isnt there anyway i can use my logitec express cam on my imac?why wont my java applets intialize and jars wont open on a site?


Check here for MAC compatible cameras.

Manufacturer/Model Driver version Platforms Meets requirements

3com Home Connect 6.6.4 Windows 2000, Me, 98 Yes

Apple iSight (Firewire) Firmware 1.0 Mac OS X (Pantder) Yes

BTC PC 380 Intel 3.20.1001.0 Windows XP Yes

Creative WebCam Go Plus 1.0 Windows XP, Me, 98 Yes

Creative WebCam (WDM) 1.0.11.131 Windows Yes

D-Link USB WebCam(DSB-C100) 0921 Windows XP, 2000, Me, 98Mac 9.2 and 9.1 Yes*

IBM Ultraport Camera 2 Most Current Windows 2000 Yes

Intel Deluxe PC Camera 1.0 Windows XP, 2000 Yes

Intel Easy PC Camera 1.0 Windows XP, 2000, Me, 98 Yes

Intel PC Camera CS 110 6.0.0.62 Windows X Yes

Irez Kritter USB 1.02b4 Windows 2000, Me, 98,Mac 9.1 Yes*

Irez StealtdFire 1.2 Mac 9.2, 9.1, 9.0.4 Yes

Logitech ClickSmart510 7.0.0.1221 Windows Yes

Logitech QuickCam traveler 6.0.1 Windows 2000 Yes

Logitech QuickCam Web 6.0.1 Windows 2000 Yes

Logitech QuickCam Express 6.0.1 Windows 2000 Yes*

Logitech QuickCam Pro 3000 6.0.1 Windows XP, 2000, Me, Mac 9.2 and 9.1 Yes

Logitech QuickCam VC Windows - 4.1.5 Macintosh - 2.1.2
Windows 2000, Mac OSX, 9.2, 9.1, 9.0 Yes

Logitech QuickCam Zoom 8.0.3.1110 Windows XP Yes

Orange Micro iBOT Pro Firewire 4.10.22 Windows 2000, Mac OS X and 9.2 Yes

Veo Stingray 5.0.0.0 Windows XP, Me, 2000, 98 Yes


Copy this site and paste it in your web browser address bar and hit ENTER todownload the MAC drivers macam version 0.9.2 (current version)
for Logitech Quick Cam.

http://webcam-osx.sourceforge.net/downloads.html

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.
Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/ )
set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.HTML )
set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:
http://www.microsoft.com/downloads/details.aspx?familyid=d78f2ff1-79ea-4066-8ba0-ddbed94864fc&displaylang=en
After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:
http://dashboard.aim.com/aim
On the VIM sign-in window, click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Dec 03, 2008 | Logitech QuickCam Express Web Camera

Not finding what you are looking for?
Microsoft Windows XP Professional Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...