Question about Microsoft Windows XP Home Edition

1 Answer

Invalid syntx error

While providing web address in address bar. It shows invalid syntx error.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 731 Answers

Hi,
The cause of this issue
CAUSE loadTOCNode(1, 'cause'); This behavior may occur for one or more of the following reasons: • The (Default) value setting in one or more of the following registry keys points to an incorrect location for the Urlmon.dll file: [HKEY_CLASSES_ROOT\CLSID\{79eac9e0-baf9-11ce-8c82-00aa004ba90b}\InprocServer32] [HKEY_CLASSES_ROOT\CLSID\{79eac9f1-baf9-11ce-8c82-00aa004ba90b}\InprocServer32] [HKEY_CLASSES_ROOT\CLSID\{79eac9f2-baf9-11ce-8c82-00aa004ba90b}\InprocServer32]This Behavior May Occur if you install a customized version of Internet Explorer that was created with the Internet Explorer Administration Kit (IEAK) version 5.01 Service Pack 1 (SP1), 5.5 SP1, or 6.0. • The following registry key is missing or damaged: HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046} • One or more of the following files is missing, damaged, or improperly registered: • Urlmon.dll • Mshtml.dll • Actxprxy.dll • Oleaut32.dll • Shell32.dll • Shdocvw.dll
RESOLUTION loadTOCNode(1, 'resolution'); To resolve this problem in Internet Explorer, follow these steps: 1. Quit all programs that are running. 2. Click Start, and then click Run. 3. Type regsvr32 urlmon.dll, and then click OK. 4. When you receive the "DllRegisterServer in urlmon.dll succeeded" message, click OK.If this does not resolve the problem, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the file names below): • Shdocvw.dll • Actxprxy.dll • Oleaut32.dll • Mshtml.dll • Browseui.dll • Shell32.dll Windows XP and Windows 2000 only loadTOCNode(3, 'resolution'); Restart the computer to enable the changes to take effect.

If the problem is still not resolved, verify that the following registry values are present and correct: HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}
Name: (Default)
Value: IDispatch
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}\ProxyStubClsid
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}
HKLM\SOFTWARE\Classes\Interface\{00020400-0000-0000-C000-000000000046}\ProxyStubClsid32
Name: (Default)
Value: {00020420-0000-0000-C000-000000000046}

If the problem is still not resolved, reinstall Internet Explorer. If you are using the version of Internet Explorer that is included with your operating system, reinstall or repair your operating system.

Thanks

Riz

Posted on Mar 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I set up network scanning?


Hi Kenneth,
I saw your name on a previous query.
This best ting with this one is to follow any information on the www.Xerox.com website.
Good Luck.

May 22, 2015 | Xerox Phaser 3635MFP/X Multifunction...

1 Answer

We need to get the printer to recognize the network server name or IP address. At present it says "Unable to connect to (DC-260-795622). The server name or IP address may be invalid.


Ensure that all your network settings on the printer are correct, especially the DNS settings. Are you able to ping the printer from a workstation? Maybe you have a bad cable connecting the printer.

Jan 21, 2015 | Xerox Office Equipment & Supplies

1 Answer

I have purchased duplicate iphone from dubai...now its shows invalid sim and some time it shows my network name but after some time it shows invalid sim card....


Your cell phone may be locked to a particular cell phoneprovider and in this case it needs to be unlocked to use with a different cellphone service provider. To get the security code/restriction code to unlock thecell phone from the current cell phone provider so you can use the SIM cardwith a different phone provider, Please click on this link and follow myinstructions :- http://www.fixya.com/support/r4049238-unlock_cell_phone If your phone provider does not help you then this WEB siteit provides security codes for a small price. http://www.mobileunlockstore.com/?gclid=CKDb2_y2558CFSlJagodxBkDHw Try this WEB sites - http://www.unlock-free.com http://www.unlock-zone.com/ http://www.unlocking.com/

Mar 17, 2011 | Cell Phones

1 Answer

While i tey to open google or rediffmail page it shows error 403 forbiden need ur help to solve it


error 403 comes when you are barred to view a particular site . usually it happens in office or school computer where some websites are blocked . You can check firewalls and confirm web address else give a try with this numbers 98.137.149.56 ( just the numbers on address bar ). but before going all this just make sure you are going online

Oct 01, 2010 | Computers & Internet

1 Answer

Facebook somehow shows my E-Mail address as dondorisann@comcadt.net, and I can not correct it back to comcast.net without an error message which says"Invalid address". How do I correct this?


comcast.net is not an email address. Technically it is called a Domain name. With some more information it becomes a URL or the name of a website. Just try copy pasting it in your Internet Explorer or Fire Fox address bar. you will browse a website.
Remember that the email address always carry the @ symbol and the domain comes after this symbol and the name (or technically an email prefix) comes before that. In your case it is "dondorisann".
If the face book database does not detect a the @ and a dot after this @ symbol it will probably not save it.
Please confirm and double check your email address.

Good Luck

Jul 30, 2010 | Computers & Internet

1 Answer

All lights are steady on and the printer won't do anything


Step One: Document for troubleshooting steps. Please refer the below mentioned web link for the troubleshooting steps. http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01578337 Note: Clicking the link may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address. Step Two: Download and install a patch for Print cartridge utility. 1. Go to the link mentioned below. 2. Click on the button ?Download only.? 3. Save the file on your desktop. 4. Double click on the file and follow the on screen instruction to install and fix the error. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-16009-3&lc=en&dlc=en&cc=us&product=374568&os=228&lang=en Note: Clicking the link may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address. Step Three: Semifull Reset. A semi-full reset will do the following: The user settings to the factory defaults, Language and country settings on some models Reset the All-in-One to the factory default settings by using these instructions: 1. Disconnect and then reconnect the power cord. 2. When the lights begin to flash, press and hold ON/Resume and Number of Copies. When only the ON/Resume light is flashing, release the buttons. When the ON/Resume light is steady, the reset is complete.

Jul 18, 2010 | HP PSC 1315 All-In-One InkJet Printer

2 Answers

I cant charage my notebook


The issue might be due to corrupt BIOS or Power Management settings of your notebook. To isolate the issue, I recommend you to perform the steps provided below:
==Power Drain==
1. Shut the computer down.

2. Disconnect the AC adapter and remove the battery.

3. Press the power button down for about 30-60 seconds.

4. Reconnect the AC adapter and the battery.

5. Restart the computer.

Try restarting the computer only with the AC power, without the battery & vice-versa.

==Reinstall the power management==

To reinstall Power Management, follow these steps:

1. Click on Start
2. Type Device Manager in the Start Search box
3. Click on Device Manager
4. Click the > sign next to System Devices.
5. Right-click the ACPI Fixed Features button and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
6. Restart the system.

On restarting the system, Windows will automatically detect and install Power Management on the computer.


I also recommend you to calibrate the notebook Battery by referring the web link provided below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00817650&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
NOTE: Clicking the link(s) may give an error indicating that it is invalid. If this occurs, copy the link and paste it on the address bar in your browser until the complete address is displayed in the Address box.
If the issue persists, I recommend you to check the status of the Battery by performing the steps in the web link provided below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821536&tmp_track_link=ot_recdoc/c00817650/en_us/c00821536/loc:1&lc=en&dlc=en&cc=us
NOTE: Clicking the link(s) may give an error indicating that it is invalid. If this occurs, copy the link and paste it on the address bar in your browser until the complete address is displayed in the Address box.

May 30, 2010 | HP Pavilion dv6000z Notebook

2 Answers

My c5280 constantly tells me it is out of paper, even when I turn on/off, replace paper, try to run single sheets, etc...any ideas?


1. open hp solution center
2. in paper settings change paper type as plain paper and try it should resolve.

It should resolve your issue, if the issue still persists continue with the following steps

Solution Summary:
==============
Step 1: Connect directly to the wall outlet
Step 2: Paper sizes
Step 3: Clean the paper feed rollers:
Step 4: Reinstall the front panel and check the functionality
Step 5: Power cycle and Semifull reset.
Iris, to isolate the issue I request you to please perform the steps given below:
Step 1:
=====
Connect the unit directly to the wall outlet.
HP doesnot recommend connecting the printer to a surge protector. As they will not provide sufficient power to the printer. So, I request you to remove the All-in-One from the surge protector and connect the printer directly to the wall jack and switch on the printer.
Step 2:
=====
I would like to inform you that the HP Photosmart C5280 all-in-one supports only the Paper sizes given below.
102 x 152 mm (4 x 6 inches)
127 x 178 mm (5 x 7 inches)
Please let me confirm either you are using the specified supported papers or not.
Refer the weblink given below for more information on the product specifications for HP Photosmart 2610 all-in-one.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00954910&cc=us&lc=en&dlc=en&product=3204464&dlc=en&lang=en
NOTE: Clicking the link above may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
After performing the steps check the functionality of the All-in-One. If the issue persist, perform the below steps.
NOTE: After each step, check whether the issue is resolved. Once the issue is resolved, you may stop troubleshooting.
Out of paper error :
==============
In order to resolve the issue please follow the steps provided below:
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c00786157&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN
NOTE: Clicking the links may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
Step 3: Clean the paper feed rollers:
===========================
Refer the weblink given below for more information on cleaning the paper feed rollers.
Rather than sending you this document in a text format, I am referring you to the Web, where this information is easier to read with graphics and the information is specified in a step by step manner.
http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=bpu01831
NOTE: Clicking the link above may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
Step 5:
======
Photo Paper Loading:
===============
I request you to please Perform the steps provided in the article:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00994721&cc=us&lc=en&dlc=en&product=3204464&dlc=en&lang=en
NOTE: Clicking the link above may give an error indicating it is invalid. If this occurs, copy the portion of the address on the remaining line(s) and paste it at the end of the address showing in your browser until the complete address is displayed in the Address box.
Refer the article given below for more information on how to correct the envelope printing problems.
Power Cycle:
==========
Please perform the steps provided below to power cycle your All-in-One:
We are performing this step to ensure that the All-in-One receives enough power and all the elements inside the inside the All-in-One are fully charged.

The All-In-One may not be receiving enough power if connected through a surge protector. Plug the All-In-One into power outlet without any surge protector between the All-in-One and the wall jack.

1. Verify that the unit is switched on. Unplug the All-in-One from power and disconnect the connection port.
2. Wait 30 seconds.
3. Plug in the power only.
4. Repeat steps 2-4 two more times.
5. On the third time after plugging the unit into power, reconnect the connection port from the all-in-one to your computer.
6. Now check the functionality of the All-in-One.
Semifull Reset:
===========
Note:
A semi-full reset will do the following:
The user settings to the factory defaults, Language and country settings on some models.
Reset the All-in-One to the factory default settings by using these instructions:
1. Unplug the power cable from printer when the printer is powered on.
2. Press and hold OK and HELP buttons while plugging in the power cord.

Sep 11, 2009 | Office Equipment & Supplies

2 Answers

I dropped my blackberry and a jvm errror 103 error shows up


Contact your cell phone provider. They may have a solution for the error code. If restoring doesn't work, chances are it is a hardware failure

Apr 08, 2009 | RIM BlackBerry Curve 8310 Smartphone

2 Answers

Every time I submit my Email address to asubscription or application on the web my Email comes up invalid.


Please use another email ID as your curret email ID mat not be responding. Run scan of an Antiirus program.

Sep 11, 2008 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows XP Home Edition Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2644 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...