Question about Wharfedale DVD-M3 DVD Player

2 Answers

WH-HDD160HDMI The RW is showing red and the DVD doesn't want to do anything , not go on , not responding to any comands on the remote as is dead????????what can I do

Posted by on

  • 2 more comments 
  • Breezer12 Mar 21, 2008

    What does this mean, I want to know what can i do to get it working again?

  • Breezer12 Mar 21, 2008

    RW is the light in front of the DVD

  • Breezer12 Mar 21, 2008

    Sorry yes it's an RW, dont know what u mean by formatted? had it for 1 week now

  • Abbo_Durban Jun 15, 2008

    Hi.

    My one was working ok. Now just the red RW light is on. nothing else. I cannot switch it on, manually or with the remote. I unplugged it from the mains for a few minutes and when I turned it back on, same problem. Just the RW light is on, nothign else. What can the problem be? Thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Mines not starting at all cannot get into the menu's

Posted on Jun 24, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 178 Answers

If it's an RW, is it formatted to be able to burn on that player?

Posted on Mar 21, 2008

  • Robert Fawbush Mar 22, 2008

    I am asking you, if the DISC is formatted to be able to use with that player. Look in the owners manual under formatting.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do if PIONEER DVR-940HX is not responding at remote control comands


Have you tried a cheap universal remote just to verify the receiver is working for the infrared remote signal?

Jun 21, 2016 | Pioneer DVD & Blu-Ray Players

1 Answer

Insignia_Remote_Codes_I need the program codes for my ILO DVDR04 Recorder using my insignia remote.


If codes for your product are not listed in the User Manual for your TV, then you may use the search function to find a working code. Full details can be found in the User Manual, but basically:1. Turn on the device you wish to control2. Press the device button on your remote (DVD in this case)3. Press and hold SET until the red LED blinks twice, then release4. Enter 9 9 1; the LED blinks twice5. Press the number that matches your device type (2 for DVD)6. Aim the remote and press the power button; if the device responds go to step 87. If the device doesn't respond, press the CH ^ key until the device turns off8. Press SET to store the code
Remember that not every universal remote will control every device and, if the search fails, the remote is not compatible with your DVD recorder. I hope this helps.

Nov 07, 2011 | iLO DVDR04

1 Answer

It does'nt turn on don't respond any comand The


I had a problem similar to this. I fixed it by toggling through the top buttons on the remote control. Sometimes the wrong button gets pressed and the remote cannotcontrol the unit it is supposed to. i.e. make sure TT320 remote has good batteries and then make sure if it has other buttons on it like TV, cable, DVD etc that the correct one is pressed to control the TT320. My TV remote would not control my TV and by chance my kids had pressed the satellite button so I had to press the cable button and then the controller startedto control the TV again.

Nov 02, 2010 | TruTech TT320

1 Answer

Shows unformat when DVD+RW inserted


Disc need formating. While disc is in the unit press Function on the remote then arrow down to Other Function then OK button then select DVD Management then select Format disc.

Sep 21, 2009 | Panasonic DMR-EZ47V DVD Recorder/VCR

1 Answer

DVD recording


WH Smiths DVD+RW discs don't work on this machine

Dec 21, 2008 | Philips DVD & Blu-Ray Players

1 Answer

I have a hdd/dvd recorder model rh7880/rh7500 set timer recording to record onto dvd, machine switched itself on as normal but did not start to record and froze up.cannot get anything to respond either...


Recorder wasn't under warranty, so opened the unit up removed the dvd - rw disc ,which was corrupted as it turns out, put the machine back together switched it on and it worked perfectly.I have since tested it by recording both on to dvd,hdd and used the dubbing format and have had no problems.In the future I would recommend bying only top quality discs as it seems a dodgy one was responsible.

Jun 29, 2008 | LG DVD & Blu-Ray Players

2 Answers

Wharfedale wh hdd160hdmi freezed


I have the exact same problem, did u figure out why? plz email me at nishalin@gmail.com

Apr 13, 2008 | Wharfedale DVD & Blu-Ray Players

1 Answer

Panasonic DMR ES30V DVD Recorder/VCR


take it to a tech to check the system control chip could be bad.good luck

Jul 06, 2007 | Panasonic DMRES30V DVD Recorder/VCR Combo

1 Answer

Coby 626 DVD Player Remote Not Working


I have a COBY DVD player TF-DVD7005 that hadn't been used in a while. When I charged the battery and the light went from red to green, nothing happens when I push play and the DVD doesn't spin. Could the battery be dead despite the green light and where would I get a new one?

Mar 18, 2007 | Coby DVD-224 DVD Player

Not finding what you are looking for?
Wharfedale DVD-M3 DVD Player Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wharfedale DVD & Blu-Ray Players Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Are you a Wharfedale DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...