Question about Computers & Internet

1 Answer

My all-in-one 4200 printer setup to my pc?????

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 142 Answers

Epson, Samsung, Lexmark all have a 4200 all-in-one printer... so I'll give you instructions that are general.

Your printer came with a CD which included drivers and installation material. With your computer on, insert your CD and install the drivers. This is done BEFORE you connect the printer to the computer. Once the drivers and associated software is installed, you might have to restart your computer. You will be instructed if this is the case.

Once all the software is installed, you will be prompted to connect your printer to the computer (ie: attach the USB cable to the printer). Then apply power to the printer and the computer will recognize it as an additional piece of hardware and should configure itself. You may be asked some basic questions, just answer the questions and you should be good to go.

Posted on Mar 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot install parallel to USB printer cable.


I can only really offer a suggestion. But try unplugging the adapter with your pc off. Turn the pc back on insert the disk. Then turn the printer on and try plugging the adapter back in. If your adapter/printer are working you should receive a request to add new hardware. From this point you should be able to have it "search for the best driver for your device." If this doesn't work you may be looking about a bad adapter and or unresponsive printer. also try using a different usb port.

Jul 18, 2010 | Computers & Internet

1 Answer

I HAVE NO DISK FOR SETUP FOR PRINTER SCANNER FOR X85


this i presume is a lexmark x85
i presume you have windows xp or vista on your computer

if you have not tried windows setup wizard to install the scanner please do so .if its not listed or found then either go to driversguide.com where you can signup for free and download a few drivers for free or go directly to lexmark

alternatively you could email a seller of an x85 at an online shop/auction site like this link http://peterborough.kijiji.ca/c-buy-and-sell-computer-accessories-Lexmark-X85-All-in-One-Printer-Scanner-Photocopier-W0QQAdIdZ42295454 and maybe the guy might be able to email you the files needed

hope this helps.haemox

Mar 27, 2008 | Computers & Internet

1 Answer

Printer Problem


error occurred
1. Press CANCEL JOB to clear the print job from the printer memory.
2. Turn the printer off, and then turn the printer on.
3. Try printing a job from a different software application. If the job prints, go back to the first application and try printing a different file. (If the message only appears with a certain software application or print job, contact the software vendor for assistance.)
4. If the message persists with different software applications and print jobs, disconnect all cables to the printer that connect it to the network or printer.
5. Turn the printer off.
6. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lowest DIMM slot.)
7. Remove all EIO devices from the printer.
8. Turn the printer on.
9. If the error no longer exists, install each DIMM and EIO device one at a time, making sure to turn the printer off and back on as you install each device.
10. Replace a DIMM or EIO device if you determine that it causes the error.
11. Remember to reconnect all cables that connect the printer to the network or computer.
12. If the error persists, replace the firmware DIMM.
13. Replace the formatter.

Mar 19, 2008 | Computers & Internet

1 Answer

HP Officejet Pro problem


Hi, try this.
go into My computer/ Locate The Disk In the Drive D:-/E:-/F:- et,c.
right click, open/open folder to View.
Locate a file towards the Bottom, installshield Wizard Or setup.exe. or similar, try launching the program from there.
If it does,nt work, or still gives you incompatability warnings, Try START/RUN/DRIVE D:- E:- et,c setup.exe.
If none of the above work, contact hewlett packard customer services for an updated driver, via thier website.
Mike @ Compurepair.

Feb 25, 2008 | Computers & Internet

1 Answer

I need to change the phone number on my fax machine


Software was installed on your computer when the printer was installed. You most likely have a Icon by your clock for your printer. Open up this icon. Look for Fax setup or fax settings. This will allow you to change your phone number.
Without knowing the model no & name I can not look into the setup files and advise you better.
Please vote....

Feb 01, 2008 | Computers & Internet

1 Answer

I DONT HAVE MY SETUP DISK, I NEED TO INSTALL THE PRINTER


What type of printer do you have? What brand is it and what's it's modelnumber?

Greetings,

DarkNeogen

Jan 25, 2008 | Computers & Internet

1 Answer

Printer Setup


reinstall your printer. read carefully upon installation. there will be an option for you to choose language, change it to english.


i appreciate if you rate me with this.

Jan 22, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98829 Answers

David Payne
David Payne

Level 3 Expert

14071 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...