I need the unlock code to my indash that i bought and i dont know how to get it. I need it for a kenwood VZ907

Hi Fire fighter, it seems that the original and replacement remotes are no longer available from these guys.

PROCEDURE TO RESET CODE FOR MOST KENWOOD UNITS









This is a standard procedure
we use to bypass the code when we have the gear on the test bench for
repair. Try this and it should sort out your problem

You need
the remote control to do this, if you don't have one, then you may
need to go to a KENWOOD agent and get them to clear the code for you,
or purchase one for your use.

KENWOOD SECURITY CODE CLEAR
procedure Your code number is 5227 (KCAR)

* Press numeric key
“5” ( 2 times ) and press the Track UP/Next Track key
* Press
numeric key “2” ( 3 times ) and press the Track UP/Next Track key

* Press numeric key “2” ( 1 time ) and press the Track
UP/Next Track key
* Press numeric key “7” ( 2 times ) and
press the Track UP/Next Track key


Your radio will require
one of the following procedures.

Type 1
During the code
request mode, while holding the DISP key depressed, press and hold
the Volume UP or DOWN key for 3 seconds (so that “…”
disappears).
Then using your remote enter your code.

Type
2
Press the "Auto" button and "Track up" on
face of radio at the same time. The four dash lines ( . . . . )
should "disappear".

Then using your remote enter
your code.

Type 3
Model# DPX-4020 and DPX-4030
Press
and hold the 1 then the 6 preset key (preset keys are the buttons on
face of radio for storing you "favorite" radio stations).
"C" should display.
Then using your remote, enter your
code.


Enter your number from the remote control unit.
Your code number is 5227 (KCAR)

* Press numeric key “5” (
2 times ) and press the Track UP/Next Track key
* Press numeric
key “2” ( 3 times ) and press the Track UP/Next Track key
*
Press numeric key “2” ( 1 time ) and press the Track UP/Next
Track key
* Press numeric key “7” ( 2 times ) and press the
Track UP/Next Track key

The security is canceled and the set
enters the TUNER mode!


A FixYa rating would be fantastic
for helping you out with this techo tip.:)

regards
Graeme



Hi Fire fighter, it seems that the original and replacement remotes are no longer available from these guys.

PROCEDURE TO RESET CODE FOR MOST KENWOOD UNITS

This is a standard procedure we use to bypass the code when we have the gear on the test bench for repair. Try this and it should sort out your problem

You need the remote control to do this, if you don't have one, then you may need to go to a KENWOOD agent and get them to clear the code for you, or purchase one for your use.

KENWOOD SECURITY CODE CLEAR procedure Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key


Your radio will require one of the following procedures.

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
Then using your remote enter your code.

Type 2
Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".

Then using your remote enter your code.

Type 3
Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
Then using your remote, enter your code.


Enter your number from the remote control unit. Your code number is 5227 (KCAR)

* Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
* Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
* Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key

The security is canceled and the set enters the TUNER mode!


A FixYa rating would be fantastic for helping you out with this techo tip.:)

regards
Graeme