Question about HP LaserJet 3550 Printer

2 Answers

HP3550 59.c0 error

Hi Guys

I need some help with a 59.c0 error on a HP3550. I need an urgent solution.

Please see if you can help me out here. Thanx!

Posted by on

  • 2 more comments 
  • Udo Gehring
    Udo Gehring Mar 23, 2008

    Yes but with no luck. I think it might be a motor issue. Not too sure. Thanks, Udo

  • Udo Gehring
    Udo Gehring Mar 23, 2008

    Yes but with no luck. I think it might be a motor issue. Not too sure. Thanks, Udo

  • Udo Gehring
    Udo Gehring Mar 24, 2008

    Well I am qualified. 10 yrs in this industry. I think it might be the delivery motor. When i take the cartridges out it actully starts up better but the error still comes up. I have done the normal cold reset etc. but need more info on this error code. Thanks for trying to help anyway.

  • venkatssm May 25, 2009

    HP3550 59.c0 error" problem

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers
  • Patrick Michaels
    Patrick Michaels Mar 23, 2008

    well...that can happen. the motor is deep inside the printer, so you'd need a qualified service person to help with that, no?

  • Patrick Michaels
    Patrick Michaels Mar 24, 2008

    well..hp printers are not that simple, I work on Dells and lexmarks, and HP is another beast entirely. Good luck on this one

×

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Right swing guide problem. Mechanical but complex. You'll need the manual.

Posted on Jul 06, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a HP 44" Z3100 and after switching and saying "Initializing, please wait" it gives error 79-04 " Help needed urgently please!!!


Firmware issue:
1. Cancel all pending/que jobs
2. Disable nesting option
3. Dis connect data cable, restart the machine.. check...
4. Up load latest firmware.( read carefully read me file before up loading the firmware)

Jan 18, 2013 | HP DesignJet 1050c InkJet Printer

1 Answer

My Hp colorlaserjet 37ooDN is showing the error : 59.C0 Pl. HELP


Hi,
59.C0 Error Displayed on Control Panel Remove all the print cartridges from the printer so the right swing guide will be visible and check for the parts described in the photos below.
If the right side swing guide does not go all the way back, the 59.C0 alienation error will be displayed on the control panel. A plastic part on the swing guide could be missing.
See photo below where the three circles are on the right side of the printer.
Figure 1: Right swing arm assembly
37001See photo for details of the part. Call-out 1 in the photo below shows the parts in place, while Call-out 2 shows the missing part. (The part looks like an upside-down t.)
Figure 2: Missing part causing 59.C0 error
370021 - Part in place
2 - Part missing
Another cause for a 59.C0 error can be the black sliding lock is broken, out of place, or missing the spring. (See figure below) This can cause 59.C0 errors or 10.92.XX errors.
Figure 3: Right swing frame assembly
37003Replace the swing guide. Please look for the missing part in the printer so it will not cause other issues from movement to other parts of the printer.
If the part in the call-out is present, close the door slowly and observe the right side swing arm. It should close uniformally with the left side swing arm. If not, arrange for service on the printer and replace the right swing arm.

Jun 20, 2011 | HP LaserJet 3700dn Printer

1 Answer

Error 59 co in 5550DN


Hello thanks for using fixya

59 C0 error code usually affects the printer motor. The problem can range from a couple of issues that occur within the printer's motor. It can also be a cartridge issue. Depending on the printer and which manual the user is referring to, the solution to fix this error varies.
  1. Error code 59 C0 due to problems with printer motor
  2. Error code 59 C0 due to problems with cartridges
  3. Error code 59 C0 due to broken back sliding lock

Error code 59 C0 due to problems with printer motor:
This is referred to as "developing disengaging motor rotation error" Most likely, this problem points to an issue with the function of the DC controller either it has failed or it has affected the developing disengaging assembly.The solution is quite simple and you may fix the error in a matter of few steps.
The first step is to reconnect the J16 connectors that are used for the developing disengaging motor to the J1100 connectors that are used for the DC controller PCB (that is the printer circuit board of the DC controller).After connecting these two connectors to each other,you must replace the developing disengaging drive assembly directly.The final step is to replace the DC controller PCB, after which the printer is to be recalibrated.

Error code 59 C0 due to problems with cartridges:
Another more complex problem that leads to the 59 C0 error code is a problem with the cartridges.You must first remove all the printer cartridges in order to view the right swing guide. Once these have been removed, you must check for certain parts in the printer, which mostly resemble upside-down. If you finds that the swing guide does not move all the way backwards,then the most likely problem is a missing plastic component of the swing guide. This part also resembles an upside-down T.

Error code 59 C0 due to broken back sliding lock
Another problem that may cause the error to display is when the black sliding lock is broken out of place or missing its spring. If any of these cases, you must replace the swing guide completely. You should attempt to locate the missing piece within the printer so that it does not cause further problems in it. If the swing guide does function properly, then gently close the door, paying close attention to the right side of the printer's swing arm.If the right side swing arm closes in the same manner as the left side swing arm, then your printer is functioning just fine and you may simply need to turn it off to fix the error.If the right swing arm does not close properly, then the machine should be serviced by a professional to fix the problem.

I hope this solution will helpful 4 u
Please keep thumbs up in do Rating if it is helpful
THANKS & Keep Using fixya

Jan 10, 2011 | HP LaserJet 5550DN Printer

2 Answers

Laserjet 3700 got 59.C0 error


Remove all the print cartridges from the printer so the right swing guide will be visible and check for the parts described in the photos below.
If the right side swing guide does not go all the way back, the 59.C0 alienation error will be displayed on the control panel. A plastic part on the swing guide could be missing.
See photo below where the three circles are on the right side of the printer
Figure 1: Right swing arm assemblye755e62.png
See photo for details of the part. Call-out 1 in the photo below shows the parts in place, while Call-out 2 shows the missing part. (The part looks like an upside-down t.)

Figure 2: Missing part causing 59.C0 error

6349049.gif 1 - Part in place
2 - Part missing
Another cause for a 59.C0 error can be the black sliding lock is broken, out of place, or missing the spring. (See figure below) This can cause 59.C0 errors or 10.92.XX errors.

Figure 3: Right swing frame assembly
f47d4a3.gif
Replace the swing guide. Please look for the missing part in the printer so it will not cause other issues from movement to other parts of the printer.
If the part in the call-out is present, close the door slowly and observe the right side swing arm. It should close uniformally with the left side swing arm. If not, arrange for service on the printer and replace the right swing arm.
i think it solves your problem
if you have any problem regarding this issue leave a feed back,we will glad to assist you

good luck

Sep 10, 2009 | HP LaserJet 3700dn Printer

1 Answer

Internal DRS error 1500:c0:3001


Hi,
found this solution, maybe it also helps to solve your error.
Try and change OCR language
he was scanning documents with danish language to PDF and OCR language set to English. Received the same error, changing OCR language to danish solved his problem.
If not
go to HP support webpage:
http://www.hp.com/cgi-bin/hpsupport/index.pl
choose support and tr.. information option
enter your product name
and check if there is a fix published.

Success!


Aug 28, 2009 | HP LaserJet 3600n Printer

2 Answers

Internal drs error 1500:c0:3001


Try change the OCR language.

I had the same problem (HP Deskjet F4280, error code 1500:c0:3001) scanning documents with danish language to PDF and OCR language set to English. Changing OCR language to danish solved the problem.

PaulPS

Apr 13, 2009 | Printers & Copiers

1 Answer

MP830 canon 3in1 scanner lock.


my mp830 will print, copy, fax but it will not scan to the computer. Please help

Sep 10, 2008 | Canon MP830 All-In-One Printer

1 Answer

Printer zone change for Photosmart 2575 - urgent


Hi
you you have to call hp support coz they ll make the printer to print a special report and then they ll take some codes from that page which ll help them to generate a new firmware no and they ll change the zone on it...
call on
6272 5300
Standard operating hours:
8.30am - 5.30pm Monday to Friday

thanx

Jun 06, 2008 | HP Printers & Copiers

9 Answers

59 C0 error on hp color laserjet 5550


59.C0error on hp color laserjet 5550 dtn
can you please suggest a solution for the above error on my printer urgenty

Apr 10, 2008 | Printers & Copiers

Not finding what you are looking for?
HP LaserJet 3550 Printer Logo

Related Topics:

2,112 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...