Question about ViewSonic N2750w 27 in. HD-Ready LCD Television

2 Answers

HAND-ME-DOWN VIEWSONIC N2750W

I FIRST HOOKED IT UP TO MY PC AND I THOUGHT IT WAS GOING TO WORK BUT THE FIRST WINDOWS XP SCREEN STARTED TO TWIST UNTIL IT WAS JUST A SCREEN FULL OF COLORED LINES - UNHOOKED IT FROM THE PC AND JUST PLUGGED IN THE POWER { TO TRY A MONITOR SCREEN CALIBRATION OR WHATEVER } & THE ONLY MESSAGES I GET ARE " OUT OF RANGE " OR "OSD LOCKED" - WHAT DOES THIS MEAN? WHAT DO I NEED TO DO? THE REMOTE DID NOT COME WITH IT

Posted by on

2 Answers

Found the amswer I think - for a 27inch monitor or anything over 20 inches I think - you need a high end video card - the computers with the all in one mother board with the onboard video card wont deal with a monitor that big - as for using it as a TV the " osd locked " message I got rid of by holding down the menu button on top [ no remote ] while tapping the down channel button until the osd was unlocked - then I had the menu & starded adjusting until I had a pretty good picture - not enough adjustment with red/green but a pretty good TV for free - thanks for all your suggestions - George

Posted on Mar 25, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Initially, could you pls try lowering the Screen Resolution of the PC itself. In some instances you may need to likewise lower the Screen Refresh Rate of the PC. Both can be adjusted inside the Display Properties.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Mar 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote codes for the Viewsonic N2750w to work with Samsung cable box


The code number for my Samsung remote for a Viewsonic TV is:
210

Jul 02, 2014 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Hand-me-down N2750W


On screen display is locked. Fix it by:

The OSD can be enabled or disabled by pressing and holding the Menu button on the front panel for 10 seconds. If the OSD is locked, the warning message OSD Lock displays for ten seconds.

* If the OSD is locked, press and hold the Menu button for 10 seconds to unlock the OSD.
* If the OSD is unlocked, press and hold the Menu button for 10 seconds to lock the OSD.

Mar 21, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I am trying to hook up my Dell inspiron 1520 to my viewsonic n2750w tv. Is there an easy way to do this?


Yes there is... You are going to need a VGA cable and an 1/8 audio cable (for sound)

http://support.dell.com/support/edocs/systems/ins1520/en/om_en/pdf/UX8623D.pdf - On page 29 it shows a picture of the right side of your computer. You will hook the VGA cable to the VGA port (Number 8 on the diagram).
The on your tv you will hook it up to the vga port as well. Page 7 of the following document shows a pictures of the back of your tv. You will hook it up to "L" on the diagram. Be careful to not bend the pins in the connector. http://www.viewsonic.com.au/support/manuals/files/LCd%20TV/N2750w%20User%20Guide%20English.pdf
Switch your tv over to the PC input by clicking the "Input" button. Then make sure your PC is sending a signal, you might have to hit the function key to switch the view.

Mar 05, 2011 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

I do not have my remote for my viewsonic N2750w. And i cannot find a universal remote that works. Can you tell me one that will work?


Hi,

You could order a substitute remote ( as original is not available any longer ) from :-

http://remotes.com/store/viewsonic/n2750w.html

If you want to buy universal remote, be advised that for Viewsonic it would not be too successful and moreover, the one which is compatible ( Harmony ) would be expensive.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jan 10, 2011 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Can't get the monitor to come on


The same power cord as used for your PC power supply cord.
Email me if you need user manual, budmrtn@aol.com
I hope there is no problem with this TV, it has known problem with power supply and sound problems.

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

Jul 09, 2010 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Screen Not Working!!!


inverter board is failing causing shut down

Sep 17, 2009 | ViewSonic N2750w 27 in. HD-Ready LCD...

2 Answers

When i hookup dvd 2 dvi i get pic but no sound


I think I know what the problem is. I have the same tv and been going through the same thing. Looking in the manual it says you need to get sound through the pc audio its the green audio jack. you have to get a female Y analog to pc cable. I saw one on ebay for $2. My problem is I've also got my computer hooked up.

Dec 26, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

N2750W PROBLEMS WITH DIRECT TV


just press the "PIP" button on the remote it happened to me and i just thought that it looked familiar and i pressed it and it worked hope it helps :)

Nov 19, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Owners Manual


Go to ViewSonic at:
http://www.viewsonic.com/support/userguides.cfm

Enter your serial number or "n2750w".
Provides PDF document.
Save to your computer by clicking the "disc" icon at the top left of the Adober Reader screen.

Mar 31, 2008 | ViewSonic N2750w 27 in. HD-Ready LCD...

Not finding what you are looking for?
ViewSonic N2750w 27 in. HD-Ready LCD Television Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Televison & Video Experts

Cindy Wells

Level 3 Expert

4809 Answers

The Knight
The Knight

Level 3 Expert

69878 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...