- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Perhaps, it's been accidentally moved the switch on LINE SELECT to IN position (the switch is located on the right side, near the back corner of the DVD player). The switch SHOULD be moved to OUT position.
Tah dah! It's playing!
Hope this is the case. Good Luck!
Either the backlight tube or the board that drives is broken, probably the tube - it's a cold cathode fluorescent, usually along the top or bottom of the screen. It may be fixable, but probably only worth it if you DIY and can get replacement cheap enough. They can be a real pain to get to, usually cheaper to get a new player.
Try playing Different DVDs, Second Make sure which Region Disk your playing is it Region 1 or Region 2, If your DVD player is Manufactured in USA it plays only Region 1, If its manufactured in UK it plays only Region 2, If still you face same problem Use Lens Cleaner, If still you face same problem do Reset. To Reset Dvd player, Remove DVD from Dvd Player, Unplug Power chord from Walloulet for 15minutes so player goes to Defult Factor Settings, Then plug back again Power chord. Turn on Dvd player insert DVD, It should Play or else Claim Warranty.