Have a kenmore washing machine the drum will spin but the water does not come out. When I disconnected the drain hose from the drain pipe I got I was able to get about 3 gallons of water from the tube when I keep the drain hose below the tube. Therefore I don't think the drain hose is clogged in any way. Any suggestions at what I should look at?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hallo there So it will not do what it is told. This happened to my Candy machine the other day. It was finished and I opened the door, out came water and I got 5 towels on the floor to dry up the water. Closed the door again and put empty water on, it emptied the water, stopped the machine and put spin on and it made it. My experience ,learned the hard way, to wait long enough after the machine stops as well as between changing programs. I this will be of some use to you. Kolbrun
Not knowing the model of your machine, I can provide some generic advice. Please add a comment to this thread if you need more help.This is almost certainly a simple problem with your empty pump filter being clogged. The empty cycle is timed and if it can't get all the water out in time because the filter is blocked and slowing the empty down, then it will fail safe and won't step on to the final spin cycle with excess water in the drum. While it's trying to get the water evacuated, you will probably see the machine doing a slow tumble for up to 8 minutes and you may also hear the empty pump running too. You need to locate and clean the filter. Depending on the model there is probably a round filter cap on the front of the machine at the bottom (It may be behind a small door or hidden behind a clip on panel on the bottom) Many models of this design also have a small hose to the left of the filter cap that you can pull out, remove a plug from and drain off any water in the filter before you remove the filter and get your floor wet, so take a look for this before you remove the filter and get soaked.
Well the first thing is to check and see if the belt is broke on the drum (take the back off) or the belt is slipping ,hence the noise .Not a major deal but that is what it sounds like and that is good news because that is an easy fix. Get model and your nearest appliance store will have one. I probably won't empty water cause the other two cycles weren't working ,I'm pretty sure its the belt from what you have told me.Good luck! Oh and by the way it comes offf easy just undo the springs and well you'll see easy!
will the drum go round when on a wash. and is it drianing water out if the drum goes round its not your brushes. if it not emptying water you pump as gone and will not spin if there is water in the drum
Unplug machine, remove water pump and motor, behind the motor is a coupler, take broken parts to your local appliance parts store. Costs 16 bucks, replace the broken parts with new ones, reassemble machine. Never ever do a blanket/comforter in your machine again!!