Question about Brother SE-270D Computerized Sewing Machine

4 Answers

Brother PED-Basic Driver?

I have a Brother SE-350 and I just received the PED-Basoc I ordered online. I thought I followed the installation correctly, but I do not see any images or designs on the card. I unistalled the software and reinstalled, is it possible I deleted the designs from the card?

Can I start over from scratch? I tried unplugging and replugging in the unit from the USB but I do not get prompted like I did the first time I plugged it in

Posted by on

  • 4 more comments 
  • Kooks57 Mar 24, 2008

    Thank you so much , problem solved, again million thanks .

  • Anonymous Aug 10, 2008

    DOWN LOADED FILES WON'T READ ON THE MACHINE

  • Anonymous Nov 23, 2008

    PED CARD READER IS NOT WORKING

  • juniper33 Jan 02, 2009

    I downloaded the designs and cannot put them on my PED cartridge what did I do wrong?

  • sixtytoimpal Feb 01, 2009

    I have two machines both brothers one is a SE270D and the other is a PE150. I bought the PED-Basic, ver 1.0. downloaded on to the card and when I put the card into my machines both say "This card can not be used on this machine" Tell me what the problem is

  • missmyson Feb 03, 2009

    I have a Brother SE-350 and I just received the PED-Basic I ordered online. I thought I followed the installation correctly, but I do not see any images or designs on the card. I unistalled the software and reinstalled, is it possible I deleted the designs from the card?

    Every time I reinstall the program now it won't load when I click the short cut. Have I mess it up?



    thanks

×

4 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Also check on the Brother Website for the software update on Ped Basic; before I installed the update I could not get my card reader to recognize the designs!

Posted on Apr 11, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Dear Kooks57, you have not deleted your designs, the program, card reader and card you purchased are for downloading designs from the internet or a computer. You will find free designs all over the internet including Brothers site. To use the reader you will download your designs from the internet or another card with designs on it and put them in a specific folder on your computer, then you can tell the Basic program to seach that folder and move the designs you want to the card in the reader. Once the designs have been moved to the card you can use it in your machine. Hope this helps if you need more help please follow the user instructions step by step and it should get you where you want to go, See page 8 in the manual.
Gale

Posted on Mar 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Make sure you have the correct hoop size on the program selected, if it is other than 100x100 on the smaller machines, the designs don't show up when you try to embroider one.

Posted on Feb 16, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Double click on card and hit ok deisgns shoul appear it you have any on the card--Double click and hit ok desktop then your files will drop down Hope this helps

Posted on Oct 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need driver for ped basic for windows 7 with babylock esante


The updates are here
http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=hf_basiceus&dlid=&flang=English&os=99&type2=-1

Oct 23, 2012 | Brother SE-270D Computerized Sewing...

1 Answer

I'm getting an error that says MFC application has stopped working. It's coming up when I open my PED-Basic. I have deleted the program and reinstalled but i still keep getting this message. When I...


if you have win 7 or vista on your laptop .. the program may be written for win xp .. if so, you can check to see if ugraded software is available from brother for your operating system .. .. or you can load your present software using windows " Compaaibillity Mode" chose XP or whatever operating system the brother software was written for .. right click on your program loader on your disk (setup or whateve) . then select "compatability mode"

Jan 27, 2010 | Brother SE-270D Computerized Sewing...

1 Answer

My Brother SE 270D will not read my Ped Basic memory card. I used this card several times before without problems


Usually this indicates a design larger than 4x4. Check the design on you PED Basic to see what size it is and then use a sizer program to shrink it if that is the problem.

Jul 04, 2009 | Brother SE-270D Computerized Sewing...

1 Answer

Blank Card, PE Design says it's a ''read only''


Hi - I think the problem is that although the Magic Card is compatible with your machine, it is not recognized by with the PED writer. I have the Brother PED-Basic sfotware and a Brother PED-Basic USB card writer box. The only blank card that the my Brother reader can read is the blank cards made by Brother. Which embroidery machine do you have (not critical - I'm just curious).

If you have both a Magic card and Magic Box, the box should have it's own software. I don't think the PE Design software recognizes non-brother equipment (bummer). The link I've provided below is to a dealer that sells two different blank Brother Cards. One of the cards is 1 mb. The other is 4 mb. They are the same price. You might check your documentation to see whether both cards are compatible with your reader and software. If you're not sure, you can call the dealer directly and ask. I have dealt with this dealer many times and find that they have great prices and are very knowledgeable. This link should take you to the page on which the blank Brother Cards are displayed - scroll down if you don't see them right away.

http://webstore.quiltropolis.net/stores_app/Browse_dept_items.asp?Shopper_id=1617251646531617&Store_id=492&Page_id=17&categ_id=42&parent_ids=0,20

This dealer is located on the East Coast, so you probably won't be able to reach them by phone until tomorrow. I don't know of a dealer on the West Coast to whom I can refer you. One more thought - Babylock equipment is often interchangeable with Brother equipment. If you have a Babylock dealer in your area, you might be able to find a blank Babylock card that you can buy off the shelf. Just make sure you can return it just in case it won't work.

Let me know if I understand your situation correctly - if not, send me another comment and I'll be happy to research further. BTW - if it turns out that you can't use the Magic card and can't return it, you can probably sell it online.

Thanks for getting back - I really love doing this. If you have general questions about embroidery, feel free to ask. I own several consumer embroidery machines, and I operated a commerical embroidery business for several years.

Ginny

Feb 05, 2009 | Brother Sewing Machines

1 Answer

MFC Applicaton stopped working


If your operating system is Windows 7, please try this tutorial (it's in an easy spanish): http://autorneto.com/tecnologia/gadgets/brother-en-windows-7/
Else, if you don't have this operating system, please specify which one do you have.
Hope my tutorial helps; write comments on the tutorial's page and here also. Make it known if it worked for you (only if you have Windows 7).
Good luck

Sep 26, 2008 | Brother SE-270D Computerized Sewing...

3 Answers

No card writer module connected.


A client of mine had this same problem. The driver seemed to be installed correctly in device manager (start, run, type "devmgmt.msc") press enter. I tried many things to get it to work. Then I downloaded the Windows Vista setup files on the brother site. That fixed the problem. I will post full step by step instructions @ http://rivertownnetworking.com

Hope this helps,
Shane
Rivertown Networking

Jun 16, 2008 | Brother SE-270D Computerized Sewing...

1 Answer

I'm trying to put items on my card to continue sewing but cant


I left clicked on my box with the yellow and green card, near the upper left corner under the size of hoop box.

Jun 09, 2008 | Brother SE-270D Computerized Sewing...

1 Answer

Transfering a design pattern from online to the PED Basic program


Have you tried saving them to your documents after you have extracted the file first. What size are the patterns. If they are too big they will not transfer properly.

May 03, 2008 | Brother SE-270D Computerized Sewing...

Not finding what you are looking for?
Brother SE-270D Computerized Sewing Machine Logo

1,577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...