Question about Televison & Video

1 Answer

Power light comes on and screen goes black - Televison & Video

Posted by on

  • 4 more comments 
  • itsik May 23, 2008

    black screen no sound

  • sticks40 May 26, 2008

    screen is black and no sound

  • subbieinmd Jul 06, 2008

    I put a movie in the DVD player and the sound and picture worked fine. Five minutes later, the screen started fading black from right to left, almost like an eclipse occurred on the screen and went completely black. Sound is fine, no picture. I can't even pull up the main menu screen. It was bought in 1999. Please help!!

  • J thorlton Sep 26, 2008

    Power Light Comes On but No Sound & No Picture :(

  • Anonymous Oct 31, 2008

    Sound is fine, but screen is black

  • Sean Turner Mar 20, 2009

    I was watching tv, and then the screen just went black, sound continued normally, but no picture...

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same issue.....clean the back of the t.v. of all dust, take out the bulb and blow on it to get the dust off...DO NOT TOUCH THE GLASS PART OF THE BULB! Instructions for removing the bulb begin on page 105 of your owner's manual.

Posted on May 16, 2008

  • ladonut May 16, 2008

    Just another note. The televeision has been on for almost an hour now and it has not happened since the bulb was cleared of dust...

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dgm ltv-1961wcr tv, when powering up the screen comes on for about a second, then goes black?


It is a Lcd lamp problem or even the lcd panel try to see any reflexion of the image , if u see one is the lamps, if not then is the lcd panel and if it is then is garbage.

Apr 23, 2012 | Digimate Televison & Video

1 Answer

Tv does not stay on, screen goes black


Checked all connection given properly checked your cable connection some time cable connection not proper than also its display no signal

Jan 23, 2010 | Westinghouse SK-32H240S Television

2 Answers

Sony kf 50e200a screen goes black and sound turns off for min...


TV has gone into "protect mode" to do just that to protect against the damaging failure that has been detected, you will need a servicer to diagnose the failure. Good luck and Merry Christmas!

Dec 25, 2009 | Televison & Video

1 Answer

Pinstripe cinema display flickers on momentarily then goes black. Image comes back for a split second while when power light glows steadily then goes away while power light flickers. this is a 22"...


when the screen is black and the power light is steadly lit, shine a flash light at the screen. if you can see something, the inverter board is bad and the back light cannot turn on. if the power light flickers, reseat the power plug and put your ear to the back of the monitor where the power plug is. if you hear a buzzing or any high pitched noises; the power supply is bad. use the macufactures warranty for repairs.

Nov 18, 2009 | Computers & Internet

1 Answer

Monitor comes on, I can see everything perfect then goes black


"Most" newer monitors will let you know if the are no longer receiving a signal. Sounds like the backlight is burnt out. Try getting a bright (LED works best) flashlight and shining it at the screen at all angles to see if you can see any of what you were doing. If the backlight is on the fritz, either return it on warranty or buy a new one.

Jan 31, 2009 | Westinghouse L2046NV Monitor

1 Answer

Screen goes black and power light goes out after a few minutes


it would seem that one of the internal components has failed / overheated Dont open the rear of the monitor !

if pos drop it into your nearest pc repair shop and have is serviced it may just need cleaned to free it from dust build up
on the inner parts this may be causing the unit to over heat

Nov 04, 2007 | Gateway FPD1760 17" LCD Monitor

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72214 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

69014 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...