An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 20 answers of more than 400 characters.
An expert who has answered 20 questions.
Re: securing my linksys wireless g router
Hello, In browser address window,enter 192.168.1.1. This will open your router settings. It will ask for a Username and password. I believeUsername is "admin". You may not have to enter a password. If you do enter "admin" for password also. Once in to settings you'll see a link for "wireless". Click it and from there you can change Username, password,SSID(Router Nmae) and enable WEP security. There will be directions and explanation for most all questions. If there is more I can answer, please let me know. Hope this helps.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Linksys G router gives you both wired and wireless connections over a broadband Internet connect to create a local area network. The Linksys router is compatible with wireless G and B devices, through the 2.4-GHz wireless band. The wireless speed is at 54 megabytes per second and you can get 100 megabytes per second with a wired connection. You have to set up the wireless configuration on the Linksys before using it on your network.
Plug the router's power cable into an electrical outlet. Attach an Ethernet cable into the Internet port on the back of the router. Connect the other end into your broadband modem. Connect your computer to the Linksys G using another Ethernet cable. This Ethernet cable can go into any of the wired router ports. Open your Internet browser. Type "192.168.1.1" in the address bar and hit "Enter." This is your router's IP address and the home of its Web configuration page. Click "Wireless." Click "Manual." Alter your SSID, also known as your network name. You can change this name to any value that you want. You can also change the wireless channel if you are in an area with many wireless connections that may interfere. Click "Save Changes." Click "Wireless Security." Choose an encryption method to encrypt your wireless transmissions. WPA or WPA2 are common security protocols you can use in wireless networks. Input a network key, also known as the network password. Click "Save Changes."
Linksys E series routers can broadcast 2 wireless networks. First one is the main wireless network which is secured wireless network. The second network is a guest network which will always show you unsecured. It will never show you secured and you can not make it secured. However it has a web based security. Anyone can connect to the guest network but will not be able to access Internet without Guest access password. In other words there is a security. You can disable guest access also. See more about Cisco Guest network access password
You need to log on to Linksys router to find the password or you can use with no password by resetting the router.
To get on to Linksys router connect the router to your computer with ethernet cable using one of the LAN ports on the router. Open a web browser on your computer and type 192.168.1.1. That will ask you a user ID and password. Leave the user id blank and type admin in password section. Once you are on router open page click on wireless and then security which will take you to router wireless password. Type that password on your smartphone to get internet access on smart phone! Good luck!!
Pin is basically the password of the router wep/wpa which protect the wireless router from other people to use your network or internet conenction. If you enable the wep/wpa passphase it will set security lock and will prevent other people to use your conenction.
etting up wireless security is the easiest way to prevent other people from using your wireless internet connection. Your Linksys router supports three (3) of the most commonly-used wireless security types WEP, WPA and WPA2.
This article will explain the difference between WEP, WPA, WPA2 and how to set up each of them.
type 192.168.1.1 into your browser and hit enter. This will take you to your router page.
If you have never been to this page before this is a list of defualt passwords to enter your page. Linksys BEFW11S4, WRT54G: admin Linksys EtherFast Cable/DSL Ethernet routers: Administrator Linksys Comcast routers: comcast All other Linksys routers: [none] Default passwords: Linksys BEFW11S4: [none] Linksys Comcast routers: 1234 All other Linksys routers: admin
From here you can set your own wireless security mode and generate a passphrase or key to lock out intruders. Hope this helps...Good luck
If I have helped you resolve your problem, please consider giving me a good rating and a quick thanks or good job.It will help me as well Thank you.
Since you disabled the SSID Broadcast, you would need to tell you OS how to find the connection. Go to the properties of the Wireless connection in the Control Panel and add the connection there.
To secure the wireless go to 192.168.1.1
log into the router, the default password is admin. go to wireless then security. set the WEP or WPA there. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe
U don't need a password. U need to set U'r router to a secure mode, not open ended. use WEP or other (64 bit or 128 bit) encryption. linksys allows U to select a paraphrase, example: "Love2Air" and it will generate a code, i.e. "7D23C678867". This will allow others to see that there is a wireless system, but they have to have the code to use it. U will have to have the code in your other wireless pc's in order to use the system. U can also tell the router what MAC address' (pc address') to allow or disallow to use the system.
A password is used to keep others out of U'r routers setup and changing U'r code or paraphrase. If U'r system gets highjacked, there is a reset on the router and everything will revert to the book defaults. Don't loose the book.