- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the power on and immediately press 1 or 2 repeatedly.Continue until the following message appears:Press the # button to perform disk maintenance (35+ minutes). Otherwise,press the green start button to continue.
Press # to begin the disk refresh process.This process may take as more than 30 minutes, but frequently only takes 10-15minutes. A message will appear on the screen indicating the refresh is in progress.
If problem continues:
Try dial **411
Select 4 MFP settings
Select 1 Restore Factory Defaults
If still problem continues, I strongly suggest you contact Lexmark technical support or an authorized service provider for further assistance. Thank you for choosing Lexmark.
The OCR application/software can only be installed using the installation cd. It's not available for download. I advise you to call Lexmark at 1-800-LEXMARK (1-800-539-6275) for the installation cd. They can better assist you with this request. They might be able to send you one for free. If you need more assistance, leave a comment. I'll get right back to it.
The computer cable is a standard USB printer cable (A to B connectors). The power cable is a proprietary cable that has an AC adapter box at the end, which fits into the back of the printer/scanner. This cable can only be obtained through Lexmark. If by chance, your printer has a power cable plug in the back and NOT the box tye adapter that I described, then you can pick this up at any store that sells electronics. There's two standard power cables for computers and components. One is about 1 inch wide and looks like a rectangle with rounded corners, and the other looks like a sideways number 8 with two prongs in the middle.
The Printer is a Old Printer thats y the software which you have may not work...... In this case go ahead and download the software from the following Link: http://downloads.lexmark.com/perl/downloads/downloads.cgi Download the drivers from here and install the Printer..... Thanku
Go to www.lexmark.com and click on Drivers & Downloads then Driver Finder. I did not see the X6100, but I saw the X6150 and X6170, hopefully that's what you have. You need to download the correct driver depending on what operating system you have. In other words, do you have Windows XP or Vista?
Here's a link on the Lexmark site that gives you step-by-step instructions on how to download and install a driver: