Question about Kitchen Ranges

1 Answer

Maytag Range I used the self cleaning oven, and it got really hot! The kitchen got up to 85 degrees. When the cleaning was done an F1 was on and the lock button stayed on too. We unplugged the stove, and left it off for 15 min. When we plugged it back in the lock lite was off, but the oven will not heat. When you push the bake button it says it is already preheated.

Posted by on

  • KenGib Jun 22, 2008

    Pressed the self clean, Self cleaning got our house up to 85 too. Same thing happened F1 message and oven is locked.


    Model Maytag MER5770AAA




    unplugged waited a few minutes it came back on looked fine then beeped and went back to "F1 lock"

×

1 Answer

F1 on Maytag = Bad touchpad or Clock.

Posted on Mar 22, 2008


1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven will not heat past 195 degrees


Check and see if you have blown a fuse which is usually in the top of the stove in the area of the clock if you have one. You usually can get in from the back of the stove at the top.

Jan 03, 2015 | Maytag Gemini 30" Self-Cleaning...

1 Answer

Keep getting F1-8 keypad short code can this be fixed?


You have some junk making the key sticky. Before buying anything use a hot hot damp cloth to loosen up the sticky key.

Jul 06, 2011 | Maytag Gemini 30" Self-Cleaning...

1 Answer

. THE MESSAGE APPEARED WHILE I WAS CLEANING THE


F1:-4 Runaway Clean Lower oven Check oven temperature sensor, replace if necessary

Nov 09, 2009 | Maytag Gemini 30" Self-Cleaning...

1 Answer

PUT THE OVEN ON SELF CLEAN AND IT DIED


the operating feature i that it will not let you open untill the oven has either fineshed cleaning or the oven has cooled off

Oct 29, 2009 | KitchenAid KESC307 Electric Kitchen Range

1 Answer

Maytag gemini model MER6770AAB - F1-2 error


Check the sensor for correct ohm reading. If it is good, replace the control. It should read 1143 at 100 degrees

Sep 18, 2009 | Maytag MER6772 Gemini Electric Kitchen...

1 Answer

How do I utilize the self cleaning part? Do I just press ''clean


  1. After self cleaning the range the door won't open
  2. Amana gas range conversion from NG to propane
  3. A tip on cleaning the surface grates
  4. Checking an common oven temp sensor
  5. Checking an common oven temp sensor: What does an oven temp sensor look like?
  6. Gas range repair aid - such as, my oven won't work or heat up, which style of gas oven do I have, the glow coil gets red but my oven burner will not light.
  7. GE gas range conversion from NG to propane
  8. How to change the oven temp on some common electronic controlled ovens
  9. How to re-light a surface or oven pilot light
  10. How to change a common oven glow igniter coil
  11. How a common gas valve works - click here.
  12. How Ranges, Ovens, and Stoves Work
  13. Help for storing an appliance
  14. Important Disclaimer
  15. Installing a gas flex line connector
  16. Maytag, (some) Magic Chef, (some) Jenn-Air gas range surface spark module - new module kit
  17. Maytag ( Magic Chef - Crosley - Jenn Air ) gas range conversion NG to propane
  18. My gas range flames die when I turn on more than one thing at a time
  19. My Range is flashing an " F1 F2 F3 F4 F5 F7 F9 " something, what does this mean?
  20. My surface burners keep "clicking" even after the burner is light
  21. Oven door and door hinge help
  22. Oven temp sensor - how to change helps
  23. Repair tips and information on surface burner spark modules and igniters
  24. Some "how to set the self clean" on my range
  25. Stainless Steel Cleaning
  26. Surface burners wont work
  27. This morning I noticed the range top ignition was clicking all by itself every 15-30 seconds
  28. Test for F1 fault code
  29. WCI - Frigidaire ( some Kenmore's ) gas range conversion from NG to propane
  30. WCI - Frigidaire /open burners/ (some Kenmore's) gas
  31. Whirlpool Direct Spark Ignition (DSI)
  32. Yes, your glow bar igniter can glow red and still be bad!!
 

Apr 01, 2009 | Maytag MGR5765QDQ CleanDesign Gas Kitchen...

1 Answer

F1 message on Maytag range


This is what the code means.

F1 Defective touch pad or membrane Replace touch pad or membrane (usually the touch pad)* F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC)

Good Luck and Please Rate

Jan 08, 2009 | Kitchen Ranges

1 Answer

My rf367 range gets so hot during the self cleaning cycle that the top of the range is to hot to touch and the fan on my otr microwave comes on.


Normal operation. If in doubt place a high temp theromoter on range top to see if it exceeds 600-900 degrees
The basic idea is "burn baby, burn!" Self-cleaning ovens use an approximately 900 degrees Fahrenheit (482 degrees Celsius) temperature cycle to burn off spills leftover from baking, without the use of any chemicals. A self-cleaning oven is designed with a mechanical interlock (patented in 1982) to keep the oven door locked and closed during and soon after the high-temperature cleaning cycle, which can be approximately three hours. The door stays locked to prevent burn injuries. You can open the oven door after the oven cools to approximately 600 F (315 C).

Dec 14, 2008 | Whirlpool Kitchen Ranges

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...