Question about Washing Machines
First my washer stopped working during the spin cycle, and some of the water still in the tub,i have to wait for about half an hour to have the whole process done after continuing the washing process,then after 2 weeks not doing any laundry, when i tried to switch on the on/off button,it doesn't do anything at all!I tried changing the plug fuse(thinking maybe it needed to be changed after 4 years using it) but nothing happened.please help me . TQ
Posted on Sep 12, 2010
The error code U12 shows in my washing machine ( Panasonic NA-F70GS) because the lid is broken (the part no of lid unit is AXW001G6TP5J and cost around RM 64.00 in Panasonic Malaysia Sdn Bhd (Tel: 03-55437600) or you can also get it in Tong Kong (SS3 or SS2 - Tel: 03-78755946).
Posted on Mar 24, 2010
Its switch is giving wrong signal if it is electronic switch or if it is mechanical, switch is getting stuck before spin cycle.
Also there is a chance that the spin cycle winding in your motor isnot working if the switch is shifting automatically to the spin cycle position. or the cabling may have been damaged by rat cutting or any reason. these are a few possibilities i suggest to check.
Posted on Mar 20, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the problem sound like the timer contacts are stuck try tapping the timer while it is stopped and see if it kicks in to spin let me know if this works
Posted on Sep 12, 2007
Check your exit hose spigot, it may be clogged. This is if your filter is all clean.(Refer manual) There should be air for passage in the standpipe behind. Your hose should not fit airtight into the standpipe and neither too deep into it. Snaking out your standpipe would be good too.
Rate me pl.....if helped. Click on 'thanks for trying' if not helped, your prob will be back for someone else to solve.
Posted on Feb 11, 2008
The cycle doesn't advanceWhen the cycle doesn't advance, it's probably the timer or a cold-water supply problem:
Posted on Dec 10, 2008
• Water supply is not adequate in
• Water supply taps are not
• Water inlet hose is bent.
• The filter of the inlet hose clogged.
Check another tap in the house.
Fully open tap.
Check the filter of the inlet hose.
• Load is too small.
• Load is out of balance.
• The appliance has an imbalance
detection and correction system. If
individual heavy articles are loaded
(bath mat, bath robe, etc.) and the
imbalance is too great, after several
attempts to restart the spin cycle the
machine will stop and the error code
will be displayed.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
Posted on Aug 02, 2009
Tips for a great answer:
Dec 18, 2015 | Washing Machines
Sep 11, 2011 | Hotpoint Washing Machines
Apr 06, 2010 | Washing Machines
May 18, 2009 | Washing Machines
Jul 06, 2008 | Whirlpool AWM6100 Front Load Washer
Mar 14, 2008 | Kenmore 24032\24036 Top Load Washer
2,935 people viewed this question
Usually answered in minutes!