Question about Canon i9900 InkJet Photo Printer

1 Answer

Canon i9900 not powering on

Posted by on

  • 1 more comment 
  • mlcltd Aug 10, 2008

    Same as others. Had been working - albeit with the other problems I see mentioned here such as banding, and really odd color and clogged jets, etc - but suddenly will not power on at all. Have tried several outlets and nothing is working. This printer was fantastic for about the first 50 prints, and then intermittantly - and if you held you tongue just right - and the stars were right and the moon was full - you could get a decent print. So disappointed in this machine ;-(

  • Anonymous Oct 24, 2008

    My canon i990 Had problems from begining NEVER printed clear ,used all Canon products Had it in shop till ran out of warenty NOW Power not going to printer getting noyhing HELP

  • Wobblyone Oct 28, 2008

    Mine has just died too. A little over 2 years old, maybe around 1000 prints (so it wasn't exactly hammered in that time) but it's now kaput.
    Have ordered a new power supply but as it seems the board has gone I will try and cancel that.
    VERY disappointing a printer that cost nearly £400 cant last much more than 2 years of comparatively casual use.
    Seeing how common the board fault is with this model it seems Canon supplied us all with a faulty product (like I said, a 2 year lifespan is pathetic for that kind of money).
    A damn shame as the prints were beautiful when it was working.


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Its either your power supply or logic board, assuming you have it plugged in to a live power source. Unfortunately in most cases it is the logic board, an expensive replacement. You may want to join me. Sledge hanmmer it and put it on Youtube. Cannon support is terrrible. Very unknowledgable people in my opinion;.


Posted on Apr 22, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on

Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

How do I connect two computers to my Canon MX3520 printer?

in the control panel where you see add a printer, you have to add the printer to each computer then click on the share printer box

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

Ir4570 email

Sorry, wxygzgc, but there is no indication at all in the Users' Manual that the IR4570 has any email capability.

May 20, 2014 | Office Equipment & Supplies

1 Answer

Canon mg6150 printer too much pink in photo's when printed

Please calibrate the printer using Canon software.

Mar 08, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237

First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Why does canon MP258 printer with scanner can't scan japanese yen paper bill amount 10,000. I tried it over 10 times but it stops,. And when i tried US paper bill, it works well. I need some explanation...

When you scan with any scanner it utilised the software with "Optical Character Recognition functions, usually abbreviated to OCR -> OCR is a field of research in pattern recognition, artificial intelligence and computer vision." to scan and record the scanned object, sometimes it does not or cannot recognise certain symbols or characters because of man made software & hardware have its limitations too.

Hope it helps.

Nov 12, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Canon i9900 InkJet Photo Printer Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts


Level 3 Expert

101580 Answers

old marine
old marine

Level 3 Expert

1710 Answers

Corne Viljoen

Level 2 Expert

385 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides