PC CHARGE - "INVALID EXP. DATE" ERROR MESSAGE ON 2013 & LATER

update your system date to current date

You should be able to Update the Firmware from the IBM website:
http://www.ibm.com/us/en/
Good Luck!!!

Keylib error: #28 -> EXP DATE EMPTY

Restarted Windows (as usual...), deleted the account, create it again, deleted (moved in Drafts or whatewer) unsent emails from Outbox.

Hope it will help!

After updating OS, you may receive "iTunes could not connect to the iPhone because an invalid response was received from your device".
iTunes Could Not Connect to the iPhone iOS 10 iTunes Invalid Response...
Here are the best four methods for you to refer to fixing this iTunes could not connect to the iPhone invalid response problem, via updating iTunes and iPhone, uninstalling and reinstalling iTunes, and using iPhone alternative.

MS has an online version that will fit your needs as will Google. Check my hint:
http://www1.fixya.com/support/r5831060-want_microsoft_office_capability_free
Jim

OK I FIXED IT BY UPDATING THE BIOS VERSION OF THE MOTHERBOARD..IT HAPPENS WHEN YOU HAVE REMOVED THE PROCESSOR OR YOU HAVE REPLACE GOR ANOTHER THAT IN TEORY IS COMPATIBLE WITH YOUR COMPUTER...THERE IS AN UPDATE BIOS IT WILL FIX YOUR PROBLEM..IN THIS CASE YOU DONT NEED TO USE THE CLASIC FLOPPY BOOT DISC
JUST DOWNLOAD IT TO YOUR HARD DRIVE AN RUN IT LET BY ITSEL TO DO THE JOB AND YOU DONT HAVE TO WORRY AGAIN TO PRESS F2 TO SKIP THIS MESSAGE ERROR IN YOUR WINDOWS BOOT INTERFACE.. YOU CAN GET THE UPDATE OF YOUR COMPUTER AT

WWW.HP.COM

MAKE SURE YOU PUT ALL YOUR MODEL AND LINE PRODUCT EG:COMPAQ PRESARIO SR140WM BIOS UPDATE THATS THE ONE I FEX WITH AN BIOS UPDATE IT WORKED FOR ME I HOPE IT WORK FOR YOU ALSO ...IF NOT JUST LETME KNOW.....BE CAREFULL WITH THE BIOS UPDATE YOU CHOOSE IT MUST BE THE CORRECT OR YOU WILL KILL YOUR MOTHERBOARD...IT MUST BE FOR YOUR COMPUTER MODEL IN CASE OF YOU DONT FEEL SO SECURE I CAN GIVE SUPPORT THRU FIXYA JUST LET ME KNOW YOUR LINE AND MODEL
THERE YOU HAVE A FULLLINK TO DIFERENT WINDOWS VERSION MICROCODE UPDATED CHOOSE THE ONE FOR YOU...http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=es&cc=es&prodNameId=316715&taskId=135&prodTypeId=12454&prodSeriesId=316713&lang=es&cc=es GOOD LOOK WHIT THIS BIOS UPDATE YOU DONT HAVE TO WORRY FOR *********** BOARD...I ALREADY MADE THE RESEARCH..GOD BLESS YOU DONT FORGET TO LAEVA A COMMENT AND A VOTE FOR ME..

if you issue the command show version
At the bottom written in bold you should the config register settings these nee to be as shown at the bottom of this page


R1#show version
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(3), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Thu 06-Jul-00 10:02 by cmong
Image text-base: 0x0306F914, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT
WARE (fc1)

R1 uptime is 1 day, 5 hours, 39 minutes
System returned to ROM by power-on
System image file is "flash:c2500-js-l.121-3"

cisco 2500 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 11844920, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

if yours differs the use the these commands to correct it


R1>en
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#config 0x2102
R1(config)#^Z
R1#


Hope this helps

1
Start your Norton product.
2
Do one of the following depending on your Norton product:

• For Norton 360: Click My Account, and in the My Account window, clickRenew Subscription.
  
• For Norton 2010 products: On the top right-corner of the window, click Help & Support > Subscription Status. Skip to Step 6.
  
• For Norton 2009 products: On the top right-corner of the window, click Help & Support > Subscription Status. Skip to Step 6.
  
• For Norton 2008 products: On the bottom-left corner, click Subscription.
  
• For Norton 2007 products: On the product tab, click Support, and then clickSubscription.
  
• For Norton 2006 products: On the Help & Support menu, click Subscription.
  

3
Click I have already purchased a subscription, check my subscription status.
4
Click Next.
5
Click Next.
Your Norton product checks your subscription status. This could take a minute or two.
6
Read the information in the Status check panel, and then click Finish.
Your subscription expiration date should now be correct.

that means when you connect your ipod there;s something its suppose to when you plug it it does it still charge

I had the same problem since a bought it last week and I was going crazy. Install this firmware and everything will work fine:
http://booobi.googlepages.com/uperJerry_V2.8b4_Worldwide_A.rar