Question about Audio Players & Recorders

1 Answer

My harman/kardon speakers has static noise but no sound

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 146 Answers

The first thing is to make sure the speakers are bad. You can seitch them around from side to side if only one of them is bad, if the one speaker still has bad sound, thats your problem. You can also test the woofer of the speakers. Just push in on the woofer with your fingers to move the woofer in and out (with the stereo off). You should here nothing, if you do, the speaker is bad. If both speaker are bad, expecially if they went bad at the same time, the stereo is bad, expecially if you are getting the static with the stereo on and the volume all the way down. Going buy your problem I thing that your stereo is bad. It will need tobe repaired.

Posted on Mar 20, 2008

3 Suggested Answers

larry james
  • 286 Answers

SOURCE: speaker a and b have humming noise

If it's a loud 60 cycle hum stop running it and have it serviced. This hum can be a shorted output which can send out 50 to 60 volts out to your speakers damaging them.

Posted on Jul 17, 2009

  • 4234 Answers

SOURCE: Harman Kardon AVR 500 Only works in NON-Surff mode ?

This is a good indication that the surround processing section has a problem. This can be anything from a supply voltage being missing to a defective processing IC. Without testing inside the unit, it wil be difficult to determine. With surround procesing turned off, the entire section is bypassed. This is why standard stereo mode sounds OK. The static sound is digital noise and can be poor processing or a bad D/A converter IC.

Hope this helps,
Dan

Posted on Feb 26, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i bluetooth pair my harman / kardon stand alone speaker with my ps3?


Harman Kardon AVR products and how to connect to devices

? 6:02
https://www.youtube.com/watch?v=3aPKTDlOlf0
Mar 11, 2010 - Uploaded by hyperconnected life
What I originally wanted was to have a bluetooth microphone that ... I have the av 1700 with harman Kardon ...

Esquire - Harman Kardon

www.harmankardon.com > Wireless > Portables

Harman Kardon
Rating: 4.7 - ‎16 reviews
Esquire is a Bluetooth®-enabled speaker with a built- in conference phone system ..... the sound will bounce and the bass gets a little nicer...but stand alone in the ... able toconnect it to my iPad Air as of yet; it will not recognize it on Bluetooth.Missing: ps3

[PDF]Owners Manual - Onyx Studio - Harman Kardon

br.harmankardon.com/...//harman-kardon/.../Owners%2...

Harman KardonBluetooth pairing mode automatically when it is turned on. NOTE: The speaker's Bluetooth device name is HK Onyx Studio and password is 0000. Introduction ...Missing: alone ‎ps3

Dec 16, 2015 | Audio Players & Recorders

1 Answer

How do i fix a noise problem on 6.1 avr 135 ?same trouble occur on alls channels,a high frequency sound disturbing listening.neither inputsi used(cd-dvd-tape)


There are many reasons this may happen, but without having the unit on the bench, it will be hard to tell. It may be oscillating, which would make that sound. I worked as a Technical Support Specialist for Harman Kardon. If you are interested in repairing your HK, please visit my website at audioserviceclinic.com. Thank you.

Jan 10, 2015 | Harman Kardon Audio Players & Recorders

1 Answer

Harman Kardon AVR 500 Only works in NON-Surff mode ?


This is a good indication that the surround processing section has a problem. This can be anything from a supply voltage being missing to a defective processing IC. Without testing inside the unit, it wil be difficult to determine. With surround procesing turned off, the entire section is bypassed. This is why standard stereo mode sounds OK. The static sound is digital noise and can be poor processing or a bad D/A converter IC.

Hope this helps,
Dan

Feb 26, 2010 | Harman Kardon AVR 500 Receiver

1 Answer

Harman Kardon Sound Sticks Sub Problem


Oh well, buy new ones. What are harmon kardon sticks anyway?

Mar 09, 2008 | Harman Kardon Harmon Kardon SoundStick II...

1 Answer

Speakers Make a Very Loud Noise that Increases


speaker amplifier chip may leaky or damage
you are using improper sound driver
check driver status in your computer device manager or just typing dxdiag on run in start menu, check status of sound driver installation

Jan 15, 2008 | Harman Kardon HK19.5 Computer Speakers

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4850 Answers

The Knight
The Knight

Level 3 Expert

72601 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...